STEEL WORK TO MAKE SHED Approx 48ft x 45ft steel framed shed - Photos show similar shed which was erected on site - Uprights believed to be a couple short: 12ft x 15ft bays - Deceased sale and to the best knowledge of family steel work should make a shed one bay deeper than advertised- similar shed on site to inspect - This lot is part of a dispersal sale an behalf of the executors of a deceased estate. Viewing of the lots will be available on Friday 25th November 10:30am - 4pm. A collection day will be held on Friday 2nd December 10am - 4pm.

60KVA SINGLE PHASE GENERATOR Run by a 6 cylinder Ford Diesel engine - Removed from a commercial chicken farm this year- Working when Removed - Starts well - C/W Automatic Changeover Equipment - Deep Sea Electronics controller - Serviced and tested every 6 months - Assistance with loading is available 

AIR GREASER

BLACK JUICE TANK Outlet at bottom - C/w lid

FROMENT 25KVA PTO GENERATOR 3 phase - Used 3 months ago

3 PHASE CENTRELESS AUGUR MOTOR+ GEARBOX 120mm - Never used - Believed to be made in 1991

3 PHASE CENTRELESS AUGUR MOTOR+ GEARBOX 120mm - Never used - Believed to be made in 1991

LEICA NA820 SITE LEVEL C/w stand and measuring staff

OXFORD ARC MOBILE WELDER 225 AMP - Working order - Single or 3 phase

HYDRAULIC PIPE CEMENT MIXER 3 point linkage or pallet fork attachment - Used 1 month ago

INGERSOLL-RAND AIR COMPRESSOR (S/R) Ingersoll- rand petrol air compressor - Spares and repairs - Honda 5UP engine (needs attention)

2 CONCRETE SCREEDERS 1 approx 3.8 metre x 1 approx 5.2 metres - Last used 10 years ago and only kept outdoors last 2 years - Boom engine needs attention to run

WINGET PETROL CEMENT MIXER C/w Villiers engine - Circa 1960 - Not been used for 20 years - Complete but needs attention

BARLETT BRISTOL ANTIQUE BARN SCALES No weights - Marked ' To weigh 3 CWT '

2 DRILL BOXES AND FRAME Drill boxes are approx 7' long - Metal frame has 3 point linkage and is 2 metres wide - C/w 2 solid rubber wheels

TRACTOR OIL DISPENSER Needs attention

TRACTOR GEAR OIL DISPENSER Needs attention

STIHL 021C PETROL CHAINSAW 12" Bar - working order

ECHO CS-5100 PETROL CHAINSAW 18" Bar - Works but does run low on power after a while - Needs attention

STIHL KM 130 R COMBI (S/R) Does sparks but cuts out

OREGON CHAINSAW SHARPENER Works but needs new disc

CHALLENGE XTREME 900W ELECTRIC PLANER Good working order - In box - c/w Manual

PRO DETAIL 260W ELECTRIC SANDER Good working order - In box

3 POWER TOOLS (S/R) Allen mini 26 petrol brush cutter - Lawn king TG18 petrol strimmer - Bosch 52 Accu Battery hedgetrimmer

2 4" DIAMETER GRAIN AUGURS 16' and 18' long - Both motors are running - Not used for at least 5 years - Dry stored

PETTER A1 ENGINE 1.5HP @ 750RMP Serial number 1514999 - Good working order on a trolley ready to rally

1945 PETTER A ENGINE 1.5HP @ 750RPM Supplied to simpex dairy equipment cambridge on 17/08/1945 - Good working order on trolley ready to go, comes with starting handle

4INCH CAKE BLOWER PIPE WITH BEND 4INCH CAKE BLOWER PIPE WITH A 45 DEGREE BEND - Good condition - 2x9ft lengths

VILLIAS STATIONARY ENGINE Good engine - Good compression - Missing the mag

16 NEW HEAVY DUTY WELD ON BIG BALE TINES Full Set

2 POST CAR LIFT Good working order - Working video available

DRAPER 45CC PETROL CHAINSAW Running when last used a year ago - Does not start now - Good condition - 18" bar

GEAR BOX Gear box removed from slurry pump - Good working order

SLURRY VALVE Manual slurry gate valve

INDOOR SQUARE CORN BIN Length 144 6ins - Width 114 - Height 114

7 ROLLS OF 500MM BALE WRAP 500mm x 1800m of green silotite wrap - On a pallet - All new but boxes tatty

CLARKE XE37/270 INDUSTRIAL COMPRESSOR 2019 - 2 x 4HP 230V single phase motors - 150 PSI mass pressure - 270 MTR receiver

CORN AUGER SINGLE PHASE Single Phase - 21ft Long - Diameter 4.5 ins

CBM CAT 2 TOP LINK Has slight bend in centre assembly

SCOT GOLIATH BAR / BOLT CROPPING MACHINE Bench Mount - 1/2" x 2 1/2" -

36 x D/F 2680 COMBINE ELEVATOR LIFTERS BOX OF 36 DEUTZ FAHR 2680 COMBINE ELEVATOR GRAIN RUBBER LIFTERS

RANSOMES TSR 300-HD 5F REV PLOUGH 5F rev plough - C/w land wheel - Manual shear bolt - Previously welded on one furrow - Owned for 10+ years - Used this season and last

2 DEUTZ FAHR COMBINE BELTS One new

IBC More maybe available, please contact the office/ one of the team after the sale

DUETZ FAHR COMBINE BELTS

PALLET WRAPPER

NEW 330L PLASTIC DIESEL TANK Bunded Tank - 12V Pump - Hoze and Nozzle - Black

NEW 220L PLASTIC DIESEL TANK Static Plastic Tank - 12V Pump - Hose and Nozzle - Black

NEW 220L PLASTIC DIESEL TANK Static Plastic Tank - 12V Pump - Hose and Nozzle - Yellow

NEW 440L PLASTIC DIESEL TANK Bunded Tank - 12V Pump - Hose and Nozzle - Black

MAIN 2000L TOWED OFF ROAD DIESEL BOWSER Off road only - Tractor Hitch - Electric Pump - Untested - Galvanised Chassis - Yellow - 2004 Y.O.M - Spares and Repairs

WESTERN 2000L FUEL CUBE Y.O.M 2007 - Fuel Cube - No Pump - Spares and repairs

WESTERN 2000L FUEL CUBE 806 Y.O.M 2007 - Fuel Cube - No Pump - Spares and repairs

3 X DUETZ FAHR COMBINE BELTS Unused condition

CORN DRYER BLOWER Working order

CORN AUGER Good working order

BENTALL ROLLER MILL SINGLE PHASE Working order

3X DEUTZ FAHR 2680 COMBINE BELTS

5X DEUTZ FAHR 2680 COMBINE BELTS

1X DEUTZ FAHR 2680 COMBINE BELTS

DEUTZ FAHR COMBINE CAB CONTROLS

KERB LIFTER Full working order - SN: CQ19171

AXMINSTER POWER TOOL CENTRE BANDSAW Bought new approx 2010 - C/w 2 new bandsaw blades - C/w manual - Electric - 180cm high - This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

SIP ELECTRIC BISCUIT JOINER In box - C/w manaul-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

STARTRITE ROBLAND K210 WOOODWORKER Startrite Robland K210 Universal Woodworker - Electric 240V - C/w attachments - C/w manuals - Buyers to remove (very heavy)-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

CDJ 300 TREND DOVETAIL JIG-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

CHARNWOOD W316 HOLLOW CHISEL MORTISER C/w Charnwood MCC 4 chisel set and draper 5 piece set - Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

12 SPEED 16MM DRILL PRESS Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

PARKSIDE PDS 120 AI SCROLL SAW C/w bag of spare blades - Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

RECORD POWER MODEL NO3 WOODWORKING LATHE C/w drawers under - Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate

AXMINSTER AWBGDL WIDE STONE GRINDER On stand - Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

ELEKTRA BECKUM 5PA1100 DUST EXTRACTOR Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

TITAN 4" BELT + 6" DISC SANDER Model: TT8045BT5 - Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

MACALLISTER 255MM SLIDING MITRE SAW Electric 1800W - Approx 6 years old-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

GMC 850W BELT SANDER Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

HITACHI ZK2008 SERIES FM8 8MM ROUTER In box with attachments as pictured - Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

POWERCRAFT 18V CORDLESS POWER TOOL KIT 4 piece - C/w charger, battery, jigsaw, sander, drill, torch - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

PARKSIDE LASER 670 SPIRIT LEVEL In box-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

POWERCRAFT PCCL-1800K BATTERY DRILL-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

BLACK+DECKER KA175 ELEC ORBITAL SANDER-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

POWERCRAFT 1646 ELECTRIC ROUTER TABLE 240V-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

HITACHI 160MM FC65A CIRCULAR SAW 800W electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

MITRE SAW STAND + TUBULAR FRAME 120cm wide-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

POWERCRAFT PFZ-400 RN SCROLL SAW Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

BOSCH PHO 15-82 ELECTRIC PLANER-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

NUTOLL S84107 SAW-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

TUV ANGLED SAW- This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

RECORD POWER PROFESSIONAL ENGRAVER Electric - Model 480-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

PARKSIDE PBF 400 AI BANDFILE Electric - In box - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

PARKSIDE PDT 40C2 PNEUMATIC STAPLER Air tool - In box - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

LIFTING CHAINS 20Ft long set of brothers - Good condition

STANLEY 245 X 50MM HAND PLANER In original box-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

STIHL LARGE PETROL CHAINSAW 30" bar - Model unknown - Needs attention - c/w 36" spare bar-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

APPROX 20 HAND CHISELS Most wooden ends-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

2 SPARE OREGON CHAINSAW CHAINS Size unknown-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

SAW 14.4V CIRCULAR TRIM SAW Battery + charger - In box - C/w manual- This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

BLACKSPUR ELECTRIC SIM 115 GRINDER-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

2 DRILLS 1 Black + Decker electric - 1 Milwaukee magnum holeshooter-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

MAC ALLISTER MRS 1400 SCARIFER+ RAKER 1400W - C/w Collector - Electric-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.

PARKSIDE POWER PSG 50 B2 CARVING TOOL In box - Electric - C/w manual-This lot is part of an unreserved dispersal of woodworking equipment on behalf of a deceased estate.