Over a Ton in weight - Converted from forklift - Well built - A-frame fitting - Genuine dispersal due to relinquishing farm tenancy.

Would suit small tractor

Weight unknown - Loading available

Parlour to include all stall work, feed troughs, gates, receiving vessel, milk pump, ADF, Dematron Milk Meters, Auto ID, Feed to Yield Computer, ATL Feeders, Compressor & Vacuum Pump - All in good working order up to the 19th August 2026 - Already dismantled & boxed ready for a new home - Stopped using this year due to robot installation

5-6 years old - Includes wall brackets - Good condition - Removed due to robot installation

No Lid - Painted - Some Knock Marks

Painted - Some Knock Marks

Painted - Some Knock Marks - Marked C.W.S LTD on lid

Approx 40 foam mats - 5 rubber filled mats - 2 rolls of rubber covers

1 cubicle and a half cubicle section

400,000L capacity - New and unused - Still packaged - 13.3M x 22.7M equipted with 8 x 4inch brass valves - 2 on either side

C/w submersible pump

4 digit - C/w straps and clips - Working

4 digit - C/w straps and clips - Working

4 digit - C/w straps and clips (some may need attention) - Working

4 digit - C/w straps and clips (some may need attention) - Working

Serial number: 00007884 - Previously used in milk processing set up to hold milk before pumping into seperator

To read AFI Milk Pedometers - 2 readers & one activity adaptor box - Were all working when removed from the parlour.

69 AFI milk activity monitors - 56 old style - 13 new style - Were all working when removed from the cows - C/w plastic clips for leg straps.

Spares or repairs - Control box

Spare parts and control boxes and spare pipes

Single phase - Unsure of output - Working when removed

C/w 2 x 200L churns - Coin, card and note readers - Purchased new in 2018 - All working as it should

Spares or repair - Washes 12L bottles well and quickly - 2 different wash cycles - Self dosing detergent and rinse aid - Integrated water heating - Needs a new pump (about £250 according to sales rep) - Good simple machine - C/w 2 wash trays and any left over rinse aid - £1000 new to buy

20 aside - Rapid exit parlour - Approximately 20 years old - C/w all pipe work to bulk tank area - No tank, plate coolers or compressor included - All electric boxes included - Steelwork and gates included - Manual backing gate - Air exit gates - Feeders are available if required but they are not fitted (Daltec system) - Buyer to dismantle & remove - Last used in November 2025 - Viewing recommended.

Bought as working 4 years ago but never used so unknown working condition

Stainless steel - Removed from dairy after retirement - 20 plus years old - Good working order prior to removal, was very efficient at cooling milk quickly - Wall mounted, could also be used in the brewing industry

Marked as 1 - 5' 4'' diameter x 3' high - C/w pins - Good condition - broken rail has been repaired

Marked as 2 - 5'4''' diameter x 3' high - C/w pins - Good condition

Galvanised - Good condition - Little use

Vintage - C/w original clipper head - Additional clipper head - Cast iron frame on wooden stand with toolbox - Very original - Working order - C/w spare blades

Approx 7'6'' diameter x 26'' skirt - Needs a little work - Two tombstones missing

Galvanised steel - 21'' deep x 2' square

Sheeted sides - Mesh fronts - 4' long X 2' wide X 1' deep

Rusty.

One side cracked

Cracked.

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

Approx 900 x 700 x 2000mm

Moores 300 gallon concrete water trough

Approx 3' 3'' square - Has all its bars

Rubber floor - Galvanised - C/w winch & headstock - Side opening

Very little use, like new - Only selling as bought a clamp

Good condition

C/w timber skirt - 6.5' with 5'' round posts

Marked E - Used - Worked when taken down - Slight crack in plastic

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

Dished bottom - Originally used for mixing wet mix pig feed but has not been used for that purpose for a long time

Has been used for pig feeding - 5.5hp single phase motor with starter - Working when last used but not been used for several years

Galvanised - Usable condition - Vendor no longer keeping livestock

Single calf - C/w buckets, hay racks and wall brackets - Come apart in sections - 1 panel has slight damage - Marked 1-4

Single calf - C/w buckets, hay racks and wall brackets - Comes apart in sections - Marked 5-8

Split metal corner

Good working condition - 6' x 2' - Loading available - Lorry access up to 8 wheels

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Single sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

New & unused - No plumbing parts included - Double sided

All new & opened - Out of date (2022-2023).

Approx 28 in total

Good condition, with some minor bends - 2 approx 14' long - 2 approx 15' long

Spares or repairs - Longest length - approx 5m

Excellent condition

Spares or repairs - Not complete - Strong and solid crush - C/w good working yoke.

Good original condition - Little use - 3 Bakelite adjustment knobs have been replaced within the last year - New price excess of £1200 +VAT.

All bars present - Some bends - 5' x 5' 6''

5'6'' from pivot to bottom - Gearbox moving freely - Not used for 3 years - Was working fine last time the vendor used it - No PTO

Approx 34'' long