150w - Working order when removed

Untested - 12v

Refurbished & never used since

Conversion bracket No3 - Proper made with lock pins

Only used a handful of times since purchasing new approx 2 years ago - C/w brackets - Working

From case trailed sprayer - Has separate clean water tank

Unused

All new

New

10m hose - Blow gun - Brake liner adapter - All new

Top link hydraulic Cat 3 ball/3 ball - CC= 520mm - No oil pipes

1 pair new

1 new pair

New m16-1.5mm

1 new set of brackets - Only 1 of 2 in picture

PTO shaft 1350mm - 1.3/8 6 spl QR/QR - New

1/2'' BSP ports - Flow control & relief - New & unused

Also fits Renault - New reconditioned - Marked AZJ 3261 - 12v - 3.1kw

One outer - 2 inner filters - New & unused - Still boxed

New & unused - Universal fitting

New

7 engine heater plugs - Ball joint (front)

New & unused

New & unused

New & unused

1 new pair

New & unused

For MX loader - Hydraulic latching - Not been massively used (loader was back up for handler) - Came off Claas FL100 but should fit all modern MX/Class loaders

C/w brakes, rams, shoes & bearings - 8 stud ADR

Good rotors need springs & some tine hangers - SN: 200

Conversion bracket - Homemade - Well made

Second hand parts New Holland small baler

Fits Chilton loader

Unknown what it fits - Strong.

Removed from New Holland TM165 - All complete - Palletted up - Can be loaded

1m 50cm overal width - Rusty - Short length of 540 PTO shaft.

Spares or repairs -

Approx 6' X 3' - Fork lift slots on heavy metal frame - Surface rust and one end element of frame slightly rusted through.

Came off of a John Deere 3130.

Spares and repairs - Frame as shown in pictures, only lots of parts missing

Various Ferguson linkage parts including top links and stabiliser bars

Spares or repairs - Remains of a Subaru pick up which was sat for several years - Engine does still turn over

-

Quicke loader brackets for International Tractor -

15 Triple K 'S' tines - Usable condition

Triple blades - C/w all mounting brackets, hydraulic pipes and height adjustment.

1790mm high + pins - 1700mm wide plus 110mm pin

To include bonnet, stub axles, pedal drop arms - 12 pieces in total

To include starter motors, alternators, manifold, lights etc - 11 items

To include foot plate, link arms, drop arms, clevis etc - 9 items

20'' drop x 4' long - Clips present

Spares or repairs - Indian copy of a Lister engine - Never used - Parts missing - Would make ornament

Approx 750kg - Thought to be originally a pressure vessel

30'' & 19'' - Boxes nearly full.

No longer holding charge, so scrap value only

Unknown if motor is functional

Barn stored - Axle and hubs, motor etc

Fibreglass - C/w key.

4 heater plugs, (D4D engine) - Brake cylinder - Leaf spring bushes - Wheel bearing locking nuts

Lockable door - Wooden box with mesh fronted doors - 40'' long x 31'' wide (bottom) x 28'' high - Little use

Unknown as to what they fit.

Removed from Ford Ranger

Williams racing - Unopened - C/w 2 car mats

Working order - C/w keys

Spares or repairs - Front windscreen from a series 2 land rover - Believed too be from a soft top version

Believed to fit canopy for land rover - As new condition

Lister barrel and piston, barrel has been greased - Lister cylinder head

Marked as 60 - Variety of shapes and sizes - Unused

Fitted in error and swapped for Heat Demon grips - In as new condition.

With bearings

To fit Land Rover Defender - C/w 255/60R20 Goodyear Wrangler A/T Tyres - Taken off of a new vehicle

Holding air - One 4 stud - One 6 stud

Usable condition

Thought to be off an industrial ford

8 stud wheels - Tyres holding air - 7-50 R 15 tyres - C/w Hydraulic brake ram - Hydraulic brake ram is seized.

Trelleborg 750/50/30.5 flotation wheels - John Deere front wheel centres - Some wear on edge - Good tread left in middle of tyres

Believed to be from a bedford lorry - Rims rusty, 7.00-20 tyres - Tyres have some perishing, one flat

600/65 x 38 & 480/65 x 28 wheels and tyres - Alliance TL550 multiuse/utility tyres - To fit MF 64/66/67 series and other AGCO - Tyres 80% good, 8 stud centre - Came of Massey Ferguson 6615 - Ideal road, snow, sand etc - Tyres alone over £5K new

380/85R24 - Holding Air when removed - Low tread - One has had a repair.

2 x 23.1-26 tyres - 2 x 44 x 18-20 tyres - Very good tread (80% +) - 8 stud rears - 6 stud fronts

16 ply - As new never used

Delivery miles only - One rim has small scratch

22/10 RIDE ON MOWER WHEEL AND TYRE

8 Stud John Deere Centres - good tread - No Perishing

No damage

2 x 16.9 R28 - 1 x 14.9 R28

8 stud - Would also fit west spreader

With attachments - 38'' rims - No previous repairs or punctures - Average tyre condition - Kleber tyres

GoodYear tyres - Average tyre condition - No previous repairs or punctures

Good tyre on a rim