Starts & drives - Hours unknown, clock not working - Brakes need attention - Good tyres.

C/w trailer & tow hitch - 4064hrs - 3 previous owners - Agri registered - Lights & brakes working - Automatic gearbox - Diesel - Front & rear tyres in good condition - Serviced yearly - Works fine, selling due to no longer needed

5064 miles on clock - Ball hitch - All tyres holding air with some tread - Starts, runs and drives - Automatic - Lights working - Front and rear racks - No reg or V5C - C/w manual

1260 Hours - 9647 miles - New engine early 2025 - REG: WA19 BXV - Manual tipping back - Electric power steering - Petrol, 700cc engine - Tyres have good tread & holding air - Barn stored since Spring 2025 - C/w V5 - C/w Tow hitch - Runs, starts & drives - Regularly serviced by C J Keitch (has not been serviced since last used) - Viewing welcome by appointment.

949 hours - In excellent condition - 1 owner from new - Bought from MST 1/9/2009 - Hydraulic tail lift - Always kept in a shed and very well serviced

153 hours only - Automatic - Bike has had service at 150 hours - head gasket previously skimmed - Selectable 2WD & 4WD - 1 owner from new - Tyres reasonably good all round

26,535 miles - 3445 hours on clock - Reg: BM18 LBP - C/w V5c (agriculturally registered) - Starts, runs & drives - Heater, fan, radio - Opening front windscreen - Electric windows - Front tyres holding air, tread worn - Rear tyres holding air, approx 20/30% tread - Ball hitch - Lights working, front light bar - Rear Left Hand mudguard wobbles & needs re-fixing as shown in video. - Has had lots of maintenence in the last 6 months

Only 947 hours, clock working - 6060 miles - Power steering - 4WD with diff lock - Automatic gearbox - Good tyres all round - Has ball hitch and trailer socket - Manual tip body - Good condition with everything working as it should - Only selling due to sale of farm - C/w V5

Starts, runs & drives but gearbox is noisy when you let off the throttle - Goes through all gears and reverse - Brakes working fine including the foot brake - Has good wheels & tyres all round - Good solid seat with no rips - Has front and rear racks

Not Registered - Hours & miles cannot be given as LCD display does not work - Vendor has owned bike for 7 years & only selling due to buying a newer bike - Starts & runs well - C/w heated hand grips - Please note electric start does not work so only starts on the pull start. When the bike was serviced the engineer said it was the slip ping that the starter fits into that was faulty - Please note the bike weaps a very small amount of oil and the auto gear change does not work but gears work well on the manual 'tiptronic' style on the handle bars - Has been regularly serviced

2514 Hours - Selectable 2WD & 4WD - Automatic - Manual Tip Body - Full Cab - Good Working Order - Good Tyres

2994 Hours on clock - Selectable 2WD & 4WD - Automatic - Manual Tip - Runs & Drives - Some Corrosion

3490 Hours - Brakes & Lights working - Recent Oil Change - No V5C or registration - Petrol - 4WD - Tyres reasonably good - Front brakes require bleeding / attention

Serial No: RFRSM502YMM050959 - Not road registered - Brakes and lights working - Automatic gearbox - Petrol - 100cc - All tyres have 90% tread - Good condition - Barely been ridden

Combination table saw, spindle moulder, planer thicknesser, mortising & jointing unit - 240v/ single phase - C/w framework/guides & brackets - Vendor purchased to complete windows on house initially several years ago and since then it has been retained for hobby/home use only - Purchaser will need to bring people power/ lifting assistance or co-ordinate with vendors regarding collection - C/w user manual - Tooling & items from the same location are lotted at Lot 4934, 3935, 4936, 4937, 4938, 4939, 4940, 4941, 4942, 4943.

Used - Has been dismantled - 20M x 10M - Steelwork, glass, nets and floor included - Manufacturer is Unisport

Pitch Pine & hard Maple - Consists of 29 sections ranging from 4'5'' - 8' long - All are approximately 42'' wide - Access is restricted but can be brought out to meet a larger vehicle - Please see photographs of a table which the vendor made from one section - Table is not included - Very heavy & no forklift.

Serial No: 16126 K1 - Capable of producing 0.5 megawatts - Complete system which includes heat exchanger pressure vessel with booster pump, all pipework, intake system, boiler and hot water tank - Sensors on feed intake system to regulate amount going into boiler - 3 phase - Easy to take out of building as on a skid unit which is 3.8m wide - Boiler system had a major service and has not done 200 hours since - Boiler system was last run regularly to dry grain and was used to dry woodchip commercially - Please note the fans and drying floors are not included - Good working order and viewings recommended

Serial No: 16126 K2 - Capable of producing 0.5megawatts - Complete system which includes heat exchanger, pressure vessel with booster pump, all pipe work, intake system, boiler and hot water tank - Sensors on feed intake system to regulate amount going into boiler - 3 phase - Easy to take out of building as on a skid unit which is 3.8m wide - Boiler system had a major service and has not done 200 hours since - Boiler system was last run regularly to dry grain and was used to dry wood chip commercially - Please note the fans and drying floors are not included - Good working order and viewings recommended

Working order but does require 1 new cable on controls - Mounted machine - Swivel shute

C/w PTO shaft - Brakes and lights working - Tyres have good tread - Holding air but perished - Hydraulic door (no rust on ram) - Auger and tub in good condition - Agitator missing - Working order

New tyres - All tines present & good condition - C/w control box

2004 Keenan Klassik 170 Feeder Wagon - Spares or repair - Bought in working order a few years ago but never used by present owner - Lights need attention - One flat tyre and one holding air - No PTO shaft - Lots of good parts

Age unknown - 750mm wrap size - Nice simple wrapper - C/w cable controls - Mechanical knife - Electric counter (not original) - Bale count unknown - 4 new turn table belts last year - One new tyre last year - Used this season

Year unknown - PTO shaft - Lights not working and brakes untested - Rotor blades need replacing - Spreader in good working order - Comes with agitator

Fitted with hopper extension, hydraulic crane - Weight cell system - Boarder control - Amatron 3 electric control box - 18 mtr-24mtr disc's fitted - C/w PTO shaft - Not be used for 4 months - Selling due to upgrade - Holds 4 bags comfortably

Amazone ZA-M Maxis fertiliser spreader - Twin disc - C/w hopper extension and boarder control - Set up to 12 metre spread width - Been oiled up and put away indoors - Lights present but not tested

Fitted with 2014 Pichon Rampe 12m dribble bar - Self loading arm - Good tyres 650/65 R30.5 - Galvanised tank - Fitted slope control kit and weight transfer - Holds 3,500 gallon approx - Hydraulic brakes and air - Lights present - Rear steer - 80mm ball hitch - 13,800L/min 1000rpm vacuum pump - Has had very little use

Independent oil tank and pump - Hydraulic legs - 2 buckets (16'' and 12'' with ejector)

Really strong and well made tool - No PTO Shaft, used as normal subsoiler - One owner from new - Knock on feet - For sale due to change in farming practise (now practising low disturbance).

Bought as ex demo on farm - 10,347 bales on bale count - C/w control box - Only being sold as farm now using contractor - Used this year - Good working order - Used for grass and straw - 13 knives - Recent new main chain put in (old chain is a spare) - New chain has only done approx 200 bales - Auto lube - 6' pick up - PTO

Unknown year - Very tidy and fully working - Working width 4.6m - Includes LED lights - Hydraulic folding - No known faults Telehandler available for loading

Home made solid frame with flexicoil packer - 5 McConnel Shakerator legs with knock on points - Working width 2.5m - No known faults - Telehandler available for loading

Suit quad bike or compact tractor - Kawasaki FA210 engine - Tyres holding air - Bought 12 months ago & never used - Was working when purchased - Engine starts & runs - 3 pick up

Both full - Bungs present - Bearings ok - Framework solid - Can be loaded for purchaser if required - Viewings & Enquiries welcome

Cat 2 - Requires a min 40hp to operate - 1.4m working width - SN: 202100525026 - C/w PTO - Loading available - Has had little use

Swivel shoot - Electric controls - 2 speed gearbox - One farm from new - Runs nicely, as shown in video - Loading available

SN: 74901178 - C/w control box - C/w PTO shaft - Good working order - Used this season 2026 - Made 500 round bales - New roller bearing start of season - Serviced by main dealer

SN: 3476003 - Good working order but will need new knives or use as it is

Hydraulic front disc adjustment - Hydraulic rear roller - Auto Reset Legs - 6 leg - Good wearing metal left - Hydraulic pipes in good condition

Trailed Teagle Tomahawk Straw Chopper - Lights working - Swivel shute - Remote control/bluetooth controls with everything working as it should - Tyres in very good condition - One previous owner - Had little work over last 3 years - Straight PTO - C/w manual

All in working order - Tyres like new - Rollers are full but can be emptied - Has filling bungs - Loading available

C/w additive pump and mineral hopper - High output machine - Good working order - C/w PTO shaft - Lights working - Mechanical loading available - Maximum lorry size access available

Unused and like new - Serial No: 2404102 - C/w extras in the form of calibration hopper and 1 outlet rotor meter 5mm seed roller kit (for fine seed) - C/w control box

Conventional baler - Serial no. 3937 - C/w PTO shaft - No control box - Baled 1500 bales, rarely missed a knot - Mechanical loading available - Maximum 45' lorry access available.

Conventional baler - C/w PTO shaft - Serial No. 3836 - Fully serviced & knotters fully serviced - Recent invoice to prove this work - Good working baler - Mechanical loading available - Maximum 45' lorry access available.

Tyres holding air - One owner from new - C/w PTO shaft - All tines present - C/w prop - Previous weld repair on one pivot as pictured but still functions - Hydraulic folding - One pin need re-lining/bushing and pictured

2.45M Cutting width - hydraulic side shift - c/w rear roller

4m working width - Hydraulic folding - Road lights - Ridge packer

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel

16HP V Twin Briggs and Stratton engine - Pull and key start - Recent new tyres - Very simple to adjust - 43'' cut - Off-set facility - Very little use - Surplus to requirements

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

Pigtail tines (all present) - Depth wheels missing bar one - Manual fold - 9' folded - 13' working width - Useable condition

Piggy back pneumatic DA Drill - C/w lights (untested) - Hydraulic bout markers - Electric box - With stands

Wam Group bulk solids auger - Very good condition - Only done 350 hours from new

C/w PTO - Used on 19/09/2026 - Working order - C/w PTO for piggy back drill - C/w rear packer roller - C/w levelling bar - Tines have some wearing metal left - No holes in bed - For sale due to upgrade

4 tyres holding air - All arms and tines present - Tidy central skirt - C/w front prop - C/w PTO shaft - 4.2M working - Always dry stored

58'' cutting width - Full working order - C/w spare hydraulic mower - Viewings and enquiries welcome

C/w PTO shaft - 3 point linkage - Serial No: 01ND99 - One owner from new - Good working order - Semi independent hydraulics, cable controls - Used this year and can be seen working - Head runs smooth and quiet - Has instruction manual - PTO guard needs attention - Loading available

C/w PTO shaft - Tidy for age - Still on original tines - Some tines missing - Genuine dispersal due to relinquishing farm tenancy.

Serial No: 1255 - 2.5m working width - C/w PTO - Good machine - Strong and well built - Not done much work - Loading available

3.5m cutting width - C/w PTO shaft - No grass conditioner - GWO - Tidy for age - Genuine dispersal due to relinquishing farm tenancy.

Serial No: RABu85 - 3 point linkage - C/w PTO shaft - Lights working - 6.5m maximum reach - Revolution controls (touchscreen and joystick) - Serviced and working - Hammer flails - Good machine - Too much for the vendors acreage now - Telescopic plus orbital head - No head vibration at all - Only done 240 rotor hours, will go up a bit as vendor has a couple fields left to do

Twin axle - Good bearings and chains - Tub is in good condition and lid has been rebuilt this year - Brakes working

In running order but wiring work is needed, 2 control boxes are included - Has been dry stored

PTO driven - C/w PTO - C/w 9 canvases odd one has hole and repairs - Right hand cut - Working when last used in 2023 - Knotters working when last used - Rollers in good order - Levers all free and working - For sale due to ill health

1.5hp single phase motor and starter - Working when last used but not been used for several years

SN: S-6854-AD22 - Trailed - Lights working - Swivel shute - Electrical control box - Tyres in good condition - Bought new & regularly greased & serviced - Always been barn stored - Purchased for a small suckler herd to make my fathers job easier - Not done a lot of work - Good condition

Hydraulic vari width - Knock on points - Shear bolt - Good straight plough ready to go to work

Serial number: C1867 - C/w PTO shaft - Grass conditioner - Cutting width of 2.8m - Two new skids fitted this year - Many new nylon conditioner tines fitted - Bed oils checked - New PTO guard fitted - Good skirt - C/w spare set of blades and manual - Worked well when last used - Loading available

Believed to be 1980's - 1.2m head working width - 4.5m maximum reach - Cable controls - C/w PTO shaft - J flails - Fully independent hydraulics - Loading available

Mounted - Good working order - C/w PTO shaft

3 point linkage - Good working order

C/w PTO shaft - Good working order - Loading available

C/w PTO shaft - Lights and brakes not working - Good condition for age - No rust holes - Can be worked by a small tractor

2013 Pottinger Novacat H ED Mower Conditioner - 10' cutting width - Serial No: VBP00021003001264 - Good condition - Used this season - Can be transported upright or straight behind - C/w PTO shaft

Year, make and model unknown - No loading available

DP 8R Auto reset - Serial No: 614321016 - Good working order - Used this year - Hose and few worn parts replaced

400kg - Hydraulic side shift - Side tilt - Forward & backwards tilt - Pipes present - Spool controls - Free fall action - Sale due to it genuinely being surplus to requirements, winding back.

23,358 bale count - Only selling due to upgrade - Been used this season - Approx 2m pick up hitch with crop press rollers - C/w PTO & control box

Mounted on hydraulic raise and lower trailer - Ideal for moving around yard or land but not designed for road use - Has folding log deck attached to trailer with hydraulic conveyor indeed - It has 4 and 6 split and it is possible to hook up a dust extractor - It is PTO driven and needs a minimum of 50HP to drive it and a 12volt supply to power cooling fan for hydraulics.

Working order - Last used Summer 2026 - Slight oil weep on one ram and one side roller is a bit noisy - Hydraulic folding - Approx 12' working width - C/w PTO - Solid metal work but showing rust - Good tyres

Working order - Very good wearing metal & comes with some spare shares & points - Used last season - Sale due to reduction in arable production

Very Tidy Condition - 1 Farmer Owner from new - Joystick Controls - New Flails last year - Greased Religiously - Any inspection / enquiries welcome

Swivel shute - C/w PTO shaft - Mounted - Viewing and enquiries welcome

C/W PTO - Cable controls - 3 point linkage mounted - 1.3m head - Power stew - Flails would benefit with being changed - Some hydraulic pipes perished

As new - 8ft cut - Cut less than 100 acres by a retiring farmer

New PTO guard recently - Spare tips & star joints - 12'' auger - Spare auger included

Tines all present - Tyres holding air - PTO intact - Usable condition

8' roller and frame - Good rings

6'' rollers - C/w PTO shaft and guard - Working order

For quad or compact tractor - Disc - Been dry stored - Control linkage will need freeing off - Will need minor recommissioning as it has been in dry stored for some time - Sold as seen

SN: 202000612017 - Loading available - 1.35m working width - Has only done approx 3-4 hours work from new

Not used for 2 years - Working order - No stand or rear gates - C/w PTO

Been stored indoors - Comes with PTO shaft and control box

Solid frame. - On ring hitch.

Cast bench - PTO driven belt drive

Hydraulic - Used recently - Working order but does have slight oil leak on spool valve - 3 point linkage

C/w transport trailer - Bought by current vendor 2 years ago but they have never used it, so working condition unknown