ONLINE BIDDING WILL COMMENCE AT APPROX TBC BIDDERS ARE ABLE TO LEAVE PRE-BIDS ON ITEMS THEY ARE INTERESTED IN, OR YOU CAN BID IN REAL-TIME AS THE LOT IS SOLD. HOWEVER, DUE TO THE POOR SIGNAL, THIS SERVICE IS NOT LIKELY TO BE AS SMOOTH AS IT USUALLY IS. AUCTIONEERS WILL BE MINDFUL OF THE POSSIBLE DELAY FOR ONLINE BIDDERS, BUT ALL CUSTOMERS SHOULD PLACE PRE-BIDS, AS PLACING BIDS IS VITAL TO AVOID ANY POSSIBILITY OF DISAPPOINTMENT. WE HIGHLY RECOMMEND THAT IF POSSIBLE, PROSPECTIVE BIDDERS ATTEND THE SALE IN PERSON.

For assistance on how to navigate our online bidding system, click here - https://www.stags.co.uk/pages/online-bidding-tutorials Should you have any questions relating to online bidding, or any points raised in the videos, please contact one of our team on 01769 572042.

BUYER’S PREMIUM Items purchased online, on the phone or by a proxy/absentee form are charged at 12.5% + VAT per lot, capped at a maximum of £500 per lot. Items purchased in the field are charged at 10% + VAT per lot, capped at a maximum of £250 per lot. Subject to a minimum charge of £2.00 per lot. Example 1 – In the field - £10,000 tractor + £250 buyer’s premium + VAT (Total buyer’s premium is £300) Example 2 – Online - £10,000 tractor + £500 buyer’s premium + VAT (Total buyer’s premium is £600) Example 3 – In the field - 5 lots all costing £200 (£1000 total) + £100 buyer’s premium + VAT (Total buyer’s premium is £120) Example 4 – Online - 5 lots all costing £200 (£1000 total) + £125 buyer’s premium + VAT (Total buyer’s premium is £150)

August The South West August Fodder & Livestock Online Timed Auction FULL DETAILS & ENTRY FORM September Gooseford Dairy & Southwest Handling Onsite Open Day & Auction FULL DETAILS & ENTRY FORM New for 2026! Cornwall On Site Collective Sale of Tractors, Vehicles, Farm Machinery, Livestock & General Equipment FULL DETAILS & ENTRY FORM October The South West October Online Timed Auction FULL DETAILS & ENTRY FORM

To guarantee approval, please register the day before the sale starts (24 hours before the sale starts)

C/w PTO shaft (new guard required) - Small hole to rear - Tyres holding air - Side outlet coupling ring corroded - Hydraulic pipes perished - Lights present but untested

Ring itch slightly bent - Solid metal floor - No tailgate - Hydraulic pipe perishing - Single ram - Tyres holding air - No lights

Solid frame - 1.5m square approx

Solid frame work - Sheeted sides

3pnt linkage mounted - Small crack on framework

Solid frame

Approx 15' wide - Tines worn - Some pervious repairs

All discs present

Euro 8 brackets - Hydraulic pipes perished - Minor surface rust on ram

Tines solid - C/w side knives

Tines solid - Strong frame

Bent bucket floor - Slight bend on top - No holes

Home-made partition gate - Solid floor - Tyres holding air - Previous repair to front - Jockey wheel present - Some lights damaged, likely need attention - No decks

Approx 1.58m long x 1.6m wide - No key - Silver

C/w sheep decks - Tailgate supports squashed - Some bends/dents in places - Tailgate latch bolts corroded

Spares or Repairs - No MOT - REG: K229 UFJ - No battery - 41,731 miles on clock - Interior needs cleaning - 1 soft tyre - Some corrosion on chassis/bodywork - 2.8 TDI - Key in office

Spares or Repairs - REG: R811 POD - No MOT - Key in office - Tyres holding air - No battery - Interior needs cleaning - Some dents, scuffs, damage - 140,732 miles on clock

Galvanised framework - 2.55m wide - C/w curtains - Crack on roof

Approx 13'' x 9'' at top - Approx 15'' x 10'' at bottom

Shortest approx 3' 8'' long - Longest approx 4' 10'' long

10'' x 12'' at top approx - 4' 3'' long approx

Shortest is 4' 8''' long apporx - Longest is 5' 8'' long apporx

4' 1'' wide x 4' 7'' high approx - C/w hanging & latching posts - Very, very slight bend on one edge

Trough needs repair - Full width sliding lid - Slight bend on 3pnt linkage - Some bends on frame & uprights

ZTH-165 - C/w PTO shaft - Some corrosion - Full wokring order - Been used for topping

12T capacity - Rear discharge - C/w PTO shaft (new guard required before use) - Some perishing/corrosion on pipes - Good tyres - Lights need attention - No slurry door

Chilton brackets - Tines present - Pipes to tractor missing - Some minor corrosion on rams

Sold due to ill health - C/w PTO shaft - 1.3m head approx - Cable controls - Reasonably good flails - Seal gone on boom ram

1 tine missing - Hydraulic pipes perished - Pin & cone brackets (bolt-on) - Slight bend on brackets

Petrol/ TVO - C/w starting handle - Tyres holding air (perished) - Good tin work

C/w PTO shaft - Galvanised stillage - No hose or lance

Pallet fork slots - Manual tip - Some wear in tub

1.9m wide x 90cm deep x 1.15m high - Estimated only circa 1500l capacity

C/w Jockey wheel - Ring hitch - Manual pump dispenser - Used for red diesel - Lights need attention - Tyres holding air

C/w headstock & yoke - No floor - 2 side access doors - Some bars very slightly bent

Framework generally good - Rubber needs replacing

Aluminium - Slightly bent & a split in the top - Weld mesh door damaged

1.5m wide - 80cm deep - 1.35m high - Rear access door - Pallet ting guide slots

REG: YUO 902W - All tyres holding air but very little tread - 6519 hours on clock (unknown if working) - Cab fairly tatty - No doors - Some glass missing - Starts, runs & drives - Rear lights missing - PTO & hydraulics working - Steering quite sloppy

480/65 R28 tyres - Approx 10% tread - No obvious signs of repairs

16.9 R34 tractor tyres - Approx 50% tread - Both have patches/repairs on sidewalls

Some holes in tub & corrosion - All chains appear present - Rotor bar dented - Tyres holding air but perished - C/w PTO

Trough needs repair - Full width lid - Some bends/damage to framework

Trough needs repair - Full width lid - Some bends/damage to framework

Trough solid (previously repaired) - Open access - Full width lid

9' frame - 1 wooden block may need renewing - Rear scraper bar - Sounds as if it's empty - Bungs either end - Solid frame

Grass topper 601 - Sale due to ill health - C/w PTO shaft - Offset - Solid skids

Spares or Repairs - 1 soft tyre - Floor needs total renewal - Some perishing on tyres - No Jockey wheel - Twin axle

MOT until 31st March 2027 - REG: VN61 KLK - 237,198 miles - Tool Storage - TD5 engine - Rear tool storage (hard top) - C/w front winch (husky super) - 4 tyres holding air with tread - CD player, Front light bar

14' x 6' 6'' - C/w spare wheel & tyre (perished) - Tyres holding air (tread varies) - Rhino board floor - No ramps - Full sides - Lights present but untested (1 lense missing) - LM146G - 3,500t rated - C/w jockey wheel

REG: WA18 CMY - Framework corroded & had repairs - Exhaust damaged - Brakes need attention - C/w V5 - C/w with key in office

13' long x 5' 6'' wide (internal) - Oil leak on ram - Lorry tyres - Wooden floor - No9 lights/brakes - C/w spare wheels/ tyres

Pin & cone brackets - Some corrosion on frame - Some surface rust on ram - Hydraulic pipes perished

Tyres holding air - Some previous repairs - Some leaks on hydraulic pipes, several recently renewed

120cm cutting width - 420cc petrol engine - 1 tyre soft - Can be slightly offset for cutting - Flails appear good & all present

1 x 8' - 1 x 6' 6'' - 1 x 4'' - Some frame work slightly bent/damaged

From a Leyland Tractor - Size - 12.4/11-36 - Approx 10% tread - perished - Rims appear good

Chilton brackets - small holes in corners & floors

Approx 9' cutting width - New drive belt, new slip clutch, new yoke & bearing - Been working this year - Selling due to upgrade - PTO shaft needs guards - Some perishing to tyres - Some tares to skirt - Side guard split

45mm pins - Stamped 'Tusker'

40mm pins - Some Corrosion

4'' X 6' 8'' Tall - Galvanised - C/w Turning Circle Post

12'' internal - 6m long

12'' internal - 6m long

12'' internal - 6m long

8'' internal - 6m long

8'' internal - 6m long

8'' internal - 6m long

16'' internal - 6m long

16'' internal - 6m long

16'' internal - 6m long

16'' internal - 6m long

6'' internal - 6m long

Made in Beaworthy - Smells nice - Barn stored - Can be loaded

Made in Beaworthy - Smells nice - Barn stored - Can be loaded

Made in Beaworthy - Some rushes amongst - Barn stored - Can be loaded

Made in Beaworthy - Some rushes amongst - Barn stored - Can be loaded

Timber floor, some holes - No lights or brakes - Some perishing to tyres

In working order - Diesel engine - Hour clock not working - Missing knob on throttle stick - No holes in butt

10' Long x 6' wide - Holes in floor (needs complete overhaul) - Hydraulic pipes need replacing - tyres holding air - lights present but untested

Bed is 9'6'' Long x 4'6'' wide - Twin Axle - lights working - C/w spare wheel & tyre (soft) - LED Lights - Chequer plate mudguards - Beavertail

C/w PTO shaft ( new guard needed) - some surface rust/ corrosion - rear crumbler roller

C/w PTO shaft ( new guard needed) - some surface rust/ corrosion - C/w some spare feet

Some minor flaking paint - for sale due to ill health - good skirt - C/w PTO shaft - Tidy for age

7,998 Hours on clock (unverified) - Starts, runs & drives - Hand Brake - Missing left hand door and rear window - Front tyres holding air (varying tread) - Rear tyres holding air (varying tread) - Clevis hitch & drawbar (reversible) - Some Lights present but untested - Side lights missing & rear lights only on 1 side - 6 Cylinder

Hydraulic folding - C/w PTO shaft - Tyres holding air - Lights to rear - All arms/tines present - 4 wheels per rotor

Side slew - 1 owner from new - Mast tilt - Good rope - Rear leg - Spool block controls - Good hydraulic pipes - SN: 9693

112,023 bale count - Square bale wrapper - C/w control box - Very good tyres - Lights to rear

C/w PTO Shaft (new guard required) - 2 wheels missing - 1 rotor drive shaft missing - spares or repairs - transport tyres holding air - lights present but untested - all arms/tines present

Land Wheel tyre soft - 5+1 - Shear Bolt protection

C/w PTO shaft - Hydraulic pipes okay - tyres holding air - all arms present - odd tine missing - No lights

Model:1092252 - 3 Point Linkage - Front Stands - Reasonably good metal - tidy paint - 530kg empty - Ballast spaces

Wooden floor - mesh sides - Tyres holding air - No Lights

C/w Lead bar - 1 lap bent - approx 9'-10' wide

Good tyres - Sprung drawbar - Lights present but untested - Some perishing on hydraulic pipes - C/w PTO shaft