Euro brackets

177CM wide - Tines all good and tight - 1 short pipe perished and could do with being replaced but works fine as is Euro hooks

24kg each

Galvanised - In good working order - Approx 4 years old - Includes rear frame & swinging arm to mount shearing quick

1.3m working width - Loading available

Bolt on Faucheux loader brackets

On mailleux brackets - Needs a pair of hydraulic hoses

MX/Chilton brackets - Good condition - working order - 1 tine needs bolting in

Chilton Brackets - good & strong - cutting edge slightly worn at both ends

Home made - Chilton Brackets - 27'' Spikes - Useable condition

Useable condition - Chilton Brackets - Removable top bar - Missing Hydraulic couplings

Spares or repairs - Only has one tine - No sleeves - One end of hydraulic pipe has no fitting - Manitou brackets

Well used - Brush worn - Galvanised body

Working order - Age related wear and tear - Quicke No.3 brackets - Just rollers, no spikes

Been extended to pick up 2 at a time - Believed to be Chilton Brackets - Hydraulics pipes perishing

Believed to be chilton brackets - Also has 3 point linkage pins - 4 spikes

Tipping dispenser - Has not been used for the last year - Needs some welding on the bucket - Some rust present

Got taken off for a different headstock - C/w pin

Model: Alligator 157/85 - 1.6m wide - Twin Ram - 11 tines all straight - JCB Q-Fit Brackets - only being sold as buying a new grab - bought new on farm

Euro Brackets - Old but useable and no visible holes in bucket - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Spares or Repairs, as not been used for years - Hydraulic pipes perishing - Unknown brackets

Manitou brackets - Pipes present - Rollers on arm - Adjustable width - Working

Manual Tip - Corrosion on rear panel & repair required - stock board floor, again metal needs repair - useable for basic transport as it is but would benefit from overhaul / repairs

Appears to be manual tipping - floor needs repair / attention - no rear door / gate - A frame coupling twisted / damaged - Spares or repair

Headstock area needs some welding below rams - C/w JCB q-fit brackets

6'' auger with it - Cat 1-2 - This machine is new old stock never been used but 2 years old

Came off a Takeuchi FR180 digger - Size is W450 x 81 x 76 - Some fire damage on tracks otherwise good tread. One tread only slightly damaged

5M of good hoses - Working order

Can go on a 13T machine - S60 pin size

Fits 13T pins but can be modified to suit other sizes - Lights untested - Loading available

Q fit bracket type - Good condition

Recently rebuilt - Headstock to suit 5t or 8t digger

Hydraulic - 1.5m machine size - As new unused, suitable for mini excavator

Chilton brackets - Some holes but could be repaired

Set of 10

For 6/7000 series etc - Set of 8

18 x 50kg weights - Frame and toolbox included

C/w coupling frame

Believed to fit a Massey Ferguson front weight

Possibly off John Deere - 23'' x 17'' - Good and strong

Both with locking pins - Approx 45kg

3 point linkage

Believed to be a front weight but unsure

Came off a Fiat

C/w clamp bar - In good condition with no broken weights - Loading available

Double frame to carry two sets of weights

50KG each - C/w carrier and 3PNT linkage adapter

W90 marked

1 Centre Weight with drop-pin coupling built in - 1 front weight

some variation in colour - Not Branded / Marked

3 original as pictured - 1 x international style but no branding

Previously used for goats - Has not been used for 6 years so being sold as not being used

In use up until recently when the cows were sold

Serial No: 121343105 - With stand

Element changed recently - Holds approx 250L of water - Comes with stand

Holds 250L water - Bought new two years ago - Comes with stand

Single phase - Buyer can have the 350v panel - Holds approx 1000L

Taken out of parlour recently - One receiver jar and 18 holding jars

C/w a handle - Three pin plug - One owner from new - Would benefit with a service

No leaks

2 new filters - 2 used filters - 2 units - Spanner

Holds water - Approx 5'6'' long x 3'9'' x 3' high - Bung in one end

Control panel included - Working order

All in reasonable condition - Removed from herringbone parlour in 2024 - Odd one may be patched but still useable

Pylex - No damage - No lid - C/w frame

70L capacity - Taken out 2 years ago

For sale due to ceasing dairy

Approx 1950's - Tyre holding air

In good condition

Assorted teats and fittings

Around 2 years old - good condition

240V - 2 clusters missing - Working when last used

No Lid - Painted - Some Knock Marks

Painted - Some Knock Marks

Painted - Some Knock Marks - Marked C.W.S LTD on lid

5 LENGTHS OF GALVANISED COW CUBICLE NECK RAILS (41) - 4 x 6CM diameter lengths are 430CM, 427CM, 423CM and 255CM long - 1 x 4CM diameter is 206CM long - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

To include: Heatrae Sadia Premier Plus Unvented Direct Cylinder (model: PP210E) - 210L Capacity - Aquasystem pressure vessel new last year - Time clock and Switch - Buyer to remove

One hung to motorway barrier and 1 spring - buyer to remove - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Hung to motorway barrier - Buyer to remove - Please note this lot is part of an ongoing dispersal with the vendor having relinquished the farm tenancy

Working order

Spares or repairs - Single phase - Main fuse board blown but does heat and paddle turns

C/w 2 weigh bars - Working and only approximately 1- 1 & 1/2 years old. - Wooden Platform appears Solid

Head is a little bit loose but works as it should - Surplus to requirements

Removed in February 2026 in working order - Sale due to parlour upgrade

To fit a race

Tyres both holding air - 32amp plug - C/w 9 Kongskilde drying towers - Quantity of 6'' ducting - Fan unit - Working when last used

C/w hangers and latch - Straight and correct

C/w latch and 1 hanger - Straight and correct

Manual yoke - Sliding side access on one side for TB testing etc - Recent new floor timbers (outer 2 not secured) - Useful crush with fully galvanised frame - Loading available by appointment only

Plastic coated finish - Empty - Two inspection glasses - Galvanised legs - Pallet fork slots for easy moving - Approx 4.5T capacity - Slight dent to rear - Loading available by appointment, small lorry access if required

Both bent but would fill a gap