Spares or repairs - Needs new power cable - Was working when last used

10'' 4 jaw independent chuck - To suite Colchester Student Lathe type, mandrel - American long taper key drive spindle to LO Spec - Used but really good condition, never bullied - Cat number: 1553-22601 - No key but easy to make, fit is 1/2 '' flats hex drive - Please see pics

90cm x 60cm x 2m high - On wheels - Good condition

240V - Working order

Leg vice - 2 small bench vices

Mandrel/Chuck mount C-Spanner - Correct chuck c-spanner for chuck and face plate, removal and fitting - This is for LO spec spindle noses - No more hitting the locking ring with a copper hammer

All 240 volt - Untested

Tyres holding air - Wooden body - 4' long x 28'' wide - C/w drawbar for towing behind mower

240V - Working order - C/w hoses and lance - Instruction book

Good condition - No leaks

Both working when last used - One Supawarm - One Corcho

11 1/2'' diameter x 10'' high

Solid wheels

Unknown condition - Unknown if usable

New set - 2 meter chains - Weight details in pictures.

Single phase - With tenoner - Good condition and good working order

On wheels for easy moving in garage or small workshop - Good condition and works well

Marked 10

105mm in length

Professional model - Hot and cold c/w diesel heater - Please note this lot is part of an ongoing genuine dispersal. The auctioneers are selling the property, therefore this item needs to be collected by 3rd July 2026

Hardly used - C/W steel banding, clips and all tools - Please note this lot is part of an ongoing genuine dispersal. The auctioneers are selling the property, therefore this item needs to be collected by 3rd July 2026

Private use only - C/W the stand - Good barrel - Please note this lot is part of an ongoing genuine dispersal. The auctioneers are selling the property, therefore this item needs to be collected by 3rd July 2026

Good condition - Ready to work - Solid tyres and solid sound frame - Please note this lot is part of an ongoing genuine dispersal. The auctioneers are selling the property, therefore this item needs to be collected by 3rd July 2026

54mm in length

Spares and repairs - C/w instruction manual - Has worked recently and had oil change but blowing fuses regularly

PTO driven - Good working order - 2 outlet spouts

Working - 240v.

1 x wooden ladder (2m long) - 1 x step ladder (1.6 high) - 1 x 2m triple extending ladder.

C/w gas bottle fitting - Tyres holding air.

9 are 1.2m long approximately - Various types, some extensions - 2 x 1.8m long.

Previously installed as zip wire over a pond - Approximately 25m-30m long.

Additional length of wire rope - 7 tensioners

Bought from BOC Exeter - One hobby owner - Working order - C/w welding mask

C/w battery pack/charger - C/w Imex digital level - C/w stabilo general purpose level (illuminated) - Working order.

Both working - C/w pipes

240v - Working

Works but hunts slightly (may need new brakes)

Was running when last used a couple of years ago - Now starts and is working, starter motor was stuck but issue resolved during the auction. - Electrical side working okay, likely a fuel issue - Been sat in the dry for the last few years but a bit of rust starting to appear - Not needed hence selling

3 different sizes - Easy line marker

2000 watt - Unopened

240v - Ex hire, owned for 5 years - Working

Oleo Mac 404 bar (30'') - Oregon Powercut bar (24'') - Both Oleo Mac saw

Good chain - 14''

1000 RPM - Working when used last and dry stored since - C/w gun and cables - Vendor happy to load - Strong 3 point linkage framework

Cast frame - Wood has woodworm and some damage

Working - C/w power cable/charger

Working when last used

2 sets of drain rods - C/w fittings

5' long collapsed - Free and turning

7' long/high - For electricians

7' long/high - For electricians

Spares or repairs - Not used recently

Marked 1 - 14' 10'' each section - Good condition

Marked 2 - 11' 5'' each section

Marked 3 - 9' each section - Some damage to treads

Marked 4 - 10' 5'' each section

Marked 5 - Approx 11' long - Some damage on one

Working when last used - Stored for 10 years - 240v

Used condition - 1760mm when closed

1m long when closed - Rusty - 1m long

Two tripods - 1 Staff - Were in working order when last used

2 x 3' x 2' x 56'' high - 1 x 32'' x 12'' x 56'' high - Usable condition

2m high

4'', 3'' and 2''

Working order - 110 volt - Bosch frame included

11Ov - Working order

240v - Working order

240v - Working order

Box 2' x 15'' x 11'' deep - Assorted tools

110v - C/w assorted chisels - Working when last used

C/w regulators

Spares or repairs - Honda gX240 engine - 3.75kva generator - Engine not seized - Will turn over - Not used for many years

3'8'' x 1'9'' - Folding adjustable legs

Straps 9' long - 2 ratchet straps - 4 lengths of nylon rope - 2 steel lifting ropes

Ladder hook - Unused

Aluminium - Used condition

Usable condition

One new in box (1 ton) - One record No.3 vice

110v cable leads - Untested

C/w two drawers - 6'2'' long x 30'' wide x 37'' high - Very heavy

Aluminium

2 sections - 5'6'' when folded

C/w offset bracket - 12' long when folded

Aluminium - 200cm - 1.2m when folded

6' high

To inc: rolls of cable and switches

Good condition - Little use - Including a couple of old pullers

All usable condition

Working when last used - Has done little work - 16amp outlets - Two extension reels - Handy 1200 single phase 12kva transformer

C/w dust bag - 240V - Working order - Little use

Good condition

Marked 2 - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 3 - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 4 - Includes 33 small ratchet spanners - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks

Marked 5 - 20 ratchet spanners included - This lot is part of an ongoing dispersal sale - A viewing day will be held on Friday 26th June between 9am and 12.30pm - A collection day, where lots should be collected, will be held on Friday 3rd July between 10am and 4pm - Alternative collection is possible by appointment if required, but all lots MUST be collected within 2 weeks