8 stud wheels - Tyres holding air - 7-50 R 15 tyres - C/w Hydraulic brake ram - Hydraulic brake ram is seized.

It doesn't appear to have any repairs - Tread low

To include: Axe, fork, iron bar, etc

Good condition

240 v - Working order

Approx 24 guards - New and unused - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

3' to 6' long - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

300mm x 30mm - New and unused - Longest 1.5m x 10, 1.4m x 26 and 1.2m x 9 - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

2' long - New and unused - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

New and unused - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

C/w sprinklers - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

16 inch bar - Working order - Hand book available

Spares or repairs - 75cc - It will fire but doesn't run - Can post at buyers cost

Very good condition with little use - Bump feed head - Stihl HS cutter attachment included - This cutter has also had very little use

Forward and reverse gears with high and low range - Steering leavers - Starts first pull

Petrol - 4 stroke engine - Engine has been started recently

Working order - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Model: FP152500 - Max cutting diameter 45mm - Working order - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

240v - Working order - C/w grass box - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

240v - Working order - C.w grass box - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

240v - Working order - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

- Black & Decker 240v blower - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

Working order - 240v - Manual - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

Petrol - Starts & runs - Rear roller - C/w instruction manual - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

Spares or Repairs - 140cc - Non runner

Working order

12'' - 2 stroke petrol - Was working when put in shed 12 months ago

13'' bar - No fuel to test but there is compression

Self propelled - C/w 55l grass box - C/w subaru EA175V engine - Working order - 46cm deck

C/w grass box - Self propelled - Deck solid - Working order

C/w grading (paired up on arrival) - 15m total length- 40mm deep - Unused - Label info in photos

33m total length 40mm deep - Unused - C/w grading paired up on arrival

Approx 600 - Surplus to requirements

1 obviously damaged - 35'' x 17'' internal hole - 41'' x 23'' external - Can be loaded by appointment

Has compression but has not run for some time.

Working order with hedge trimmer attachment

Not used for 12 months - Nice machine.

Has not run for some time - Electric start

12.5 horse power - C/w grass collector box - Cutting deck width 92cm - Recently serviced with new drive belt - All in good working order.

HAND SOIL TILLER TOOL

Collection of approx 55 used tree guards

In good working order - Starts well (as shown in video)

4' 10'' cut - Kawasaki FG300

KD800-26 / integrity 450 - 45cm square openings

Unused - 600mm x 600mm x 150mm - 4 x Modula ring sections - 6x Modula duct sections

Good condition

Faithful 240v chainsaw sharpener - Wickes 550w hammer drill, 240v, variable speed - Both working order

240v - Working order - C/w lance & brush

New & unused - Approx 1/2'' thick - Unknown length - Dry stored

Marked 36 - Good condition - Very strong

New & unused - Still boxed

Working order - Very little use - 240v - C/w patio washer tool

3 dark goggles - 2 electrode holders - Selection of welding helmet glasses - All new & boxed

1 oxygen - 2 acetylene regulators - New & still boxed

240v - Single phase - 0.75kw motor - Working order - Good condition

High end American wood working combination bench - To include: lathe, band saw, circular saw, belt-sander, floating tables - All quickly interchangeable - 240v - Single phase - 2hp motor - Instruction manual - C/w dust extraction unit - Lathe has bowl turning head & rest - Bought new in 1999 - Has had very little use since - Good working order

240v - On castors - Working order - Very heavy machine

4m cable - New & unused - Still packaged

Fitted with good canvas hose, brass nozzle & spirax filter/primer unit

Label reads 'Metropole Mower Service, North Road, Minehead - Tel 336/7 Ratio 8/41.' - Believed new, vintage - Also with 2 x fan belts, 3 x named spanners (Austen, Rudge Whitworth and Enfield), 3 x oil cans (3 in One and Esso), Morris Minor hub cap, headlight rim and internal door handle.

From vintage fire appliances - Copper riveted with bronze male and female couplings - Length approx 1.8m

Twinslot shelving brackets - White - 88 x 170mm - 7 x 270mm - 2 X 320mm - 61 X 370mm - 3 X 470mm - Some new & clean condition, no uprights.

Good condition - 38'' wide x 42'' high when closed - This lot is part of an unreserved dispersal sale being held due to retirement - A collection day will be held on Tuesday 15th December between 9am and 3pm - Tractor and loader available to load - Viewing lots by appointment

240 volt - Working condition.

Very little use - Full working order

Very little use - Full working order

Good solid steel workbench - C/w 2 vices

Solid cast iron work bench - Very heavy - Can be loaded with tractor

Work bench with shelf - Good condition work top covered in tin

3 phase - To include: 72 drill bits of various sizes & 2 clamps - Wiring needs attention but does all work

Works fine - Starts on key with a battery

C/w lance - Working order - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Cuts through stonework - All 110v - C/w gun range of cutters having different diameters, transformer, electric cable, hilti VC 20-u vacuum cleaner (no dust when using cutter inside) - Last used 2 years ago - Working order - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Used recently - Working order - Model: PA6-GF30 PPK - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Stanley 2kw electric heater; electric tripod work light (bulb); wessex electric LED light light; wickes electric work light (bulb and it is not working) - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Missing one die - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Inc: Phoenix laser level; Datum NA20 level; 6' & 4' levels (in bag); 2 tripods & 2 measuring sticks - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Being: Stop tap turner; wooden handled sythe; cast bread oven door; 56lb weight & shoe last - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Being 5 circular plates (1' diameter); 4 clamps (22'' long) & 6 bars (30'' long) - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Werner 7' 6'' high & Ewg 4' 6'' high - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

To include: Rolls of electric cable chains & pulley; part roll of DPC, part roll of sticky flashing; plastic underground pipe & fittings; part roll of lead; tarpaulin, etc - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

295cm long x 20cm wide x 18cm - Always kept dry - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

8' long x 2' wide shelves x 8' high with 4 shelves - Vendor will take down for buyer - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Working order - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

2 blue are 100cm wide x 106cm high (adjustable) - 2 red are 97cm wide x 106cm high (adjustable) - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Approx 75cm x 60cm x 80cm high - Working order & used recently - 240v - ''This lot is part of a small Dispersal, the vendor is preparing to put their property on the market.''

Rusty but useable - 32'' long - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

1 single - 9' long - Double extender, approx 18' long - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

3 sections are 7' long each - Approx 20' when extended - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

C/w contents - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

Working order - 240v - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

Measuring stick, chopper, etc - A collection day will be held on Friday 11th December, 8AM - 3PM. All lots must be collected.

C/w shoot attachments - Runs by belt but that could be changed back to a handle (not included)

15-24'' long - Little use & good condition

15'' long - As new condition

Spares or repairs - Engine works but no electric output - C/w manuals