Spares or Repairs - No wheels - One mud guard missing - 9' long x 5' wide

Was made to fit 3 motocross bikes - Brakes & lights working - 2 new tyres - Repainted - 10' overall length & 6' overall width

C/w winch, 12v 7 remote control - C/w spare wheel, tyres holding air - Brakes & lights working - Good condition - Ramps included - Straps included - C/w jockey wheel

In good condition

Marked 14 - No lights - Hitch not the best/needs attention - Good tyres with tread - Solid wooden floor - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w spare wheel and tyre (tyre very good) - No decks - C/w cattle partition - Purchased new in 2024, manufactured 2023 - C/w chequer plate mud guards - 14' tri-axle trailer - LED rear lights present and working - Open front ventilation - All tyres with reasonably good tread - Brakes working - Very tidy trailer

4 tyres holding air (perishing) - Rear roller door - Rear lights need attention on one side - Wooden floor - Jockey wheel present but damaged - Brakes likely to need some TLC.

C/W spare wheel and tyre (unused) - Approx 2 years old - 1 owner from new, sale due to new quad bike not fitting - C/W front prop - 2 good tyres - Rhino board floor - Lights present and working

Made by Premier Luxury Loos - Lights and brakes present - Tyres holding air with good tread - Rhino board floor - Twin sprung axle - Lades (front, rear and centre) - Some rust on chassis

Lights present but not working - All metal with removable internal partitions - Tyres in good condition - Solid old style Rappa trailer

Lights present but not working - Metal covered plywood floor in good condition - 4 good tyres - Manual tip - A used trailer in useable condition - Slight oil leak on the pump

No lights - No spare wheel - Floor is plywood and in sound condition - Good tyres - 4.80/4.00 x 8 - Can be used as flatbed or with removable sides as a cargo trailer - With sides removed, trailer can be folded in half and stored upright, thus saving space - Ball hitch and unbraked - Deck is 8' x 4' - Sides are 16'' - Wheels are 8'' and good tyres.

6' long x 4' wide - Lights and brakes working - Tyres good - Holding air - Roller shutter door - Dry inside - Jacks present

Spares or repairs - 45'' x 89'' internal size - Brakes not tested - No lights fitted - Was made to carry an ATV

Starts, runs and works - Tyres holding air - Ex National Grid - 15 KVA - Silent run - 4 cylinder Lister diesel engine - Missing exhaust - 16 x 32 amp sockets - Jacks present - Lights and brakes present - untested

Marked as 30 - Tyres holding air - Metal floor - Lightboard present but untested - Wooden sides (some decay)

Single axle - Unbraked - C/w cover - Good tyres and lights

Bed length 8' - SN: SCK60000060481127 - Lights present & working - Brakes working - C/w jockey wheel - C/w spare wheel - New floor - Tyres in good condition - Hand brake handle broke but brakes are not locked on

Bed length 8' - Lights present & working - Handbrake & brakes working - C/w jockey wheel - C/w spare wheel - Like new floor - Tyres in good condition

C/w spare wheel - Tipper all works - Lights, etc - In good condition

Solomon refrigerated container with Rivacold electric refrigerator unit - Serial Number - 21909

New roof and renovation needed

C/w roller shutter door and shelving inside.

Could be made smaller - Fully galvanised insulated panels - Allen key connectors hold it all together (some of these are damaged) - Was working when dismantled on the weekend of 26/09/2026 - C/w fridge unit/condenser and required electrical parts - Single phase

Fully lined - Some holes - Been used as office - Fitted with toilet - Can assist with loading

1' wider than a normal container - Fitted to food standards - New corrugated roof 2 years ago as it was deteriorating - Does not include any of the items within the container in the picture just the container itself

Made of insulated sheets and finished up to food hygiene standards - Due to it being attached to another building, once dismantled and removed it would have one side that would be open - Buyer to dismantle but help can be provided - None of the items within the building are included

Could be used as wendy house/dog kennel or chicken coop - 6' highest point - 6' x 4' base footprint - Has been used as dog kennel - Barn stored - Loading available

Approx measurements - Used as site hut but no longer needed - Solid and water tight - Window shutters, electrics with one striplight and sockets which work a bit but not PAT tested - No key for the door but can be locked with a padlock (not provided) - Can load but no artic access - Will be empty before collection

Single use - can assist with loading

Dismantled ready for collection - Was working and in use until a couple of years ago however not tested or used recently - C/w motor - Measurements unknown but 95'' High

Insulated - Hot & cold running water - Lights, etc - Built this year as new - Can help with loading - Can help with delivery at extra cost

Unfinished project - No doors or windows - Douglas fir timbers - Dovetailed joints - Each side is 5m long - Footprint 64m2 (approx) - Very substantial project - Viewing recommended - Could be delivered/finished at extra cost

Rare 1969 Sprite Muskateer Caravan - Dry inside - Dry stored - Can be towed away - Lights working - Would make an ideal restoration project

Serial Number: SGES000EXFAVA0081 - Lights present and working - C/w spare tyre, handbrake, jockey wheel, working toilet, working oven - 4 Berth - Good tyre tread - Excellent condition with adaptable family layout (can make 4 single beds or 2 double beds)

Spares or repair - Ex workers home - Missing 1 window - Needs some attention - Floors feel ok and seems dry inside, needs a good clean - Must be removed by end of November 2026 - Handler on site can assist with loading - Was towed on site, tyres did hold air

Ideal for glamping, home office or garden room - Substantial metal chassis complete with cast iron wheels - Insulated floor, walls and ceiling - UPVC doors and windows, glazing not fitted for ease of transport - Sockets and lights installed - External measurements: 4946mm x 2300mm - Internal measurements: 4735mm x 2086mm - Min height: 2041mm - Max height: 2264mm - Viewings welcome - Buyer to arrange collection - NO loading available

Beautiful handmade shepherds hut - Just finished and ready to use - 2.59m wide - 3m long - On new chassis with turntable

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

Good condition - Tail gate

Quicke brackets - Tines all present - Some rust holes

Quicke brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

6' wide - Good condition - Had little use

Came off a 2000 hour machine - C/w locking pin & ram.

Quick hitch 45mm pins - Strickland 2' bucket never been used.

New and never fitted - 2021 year - No brackets (frame only) - C/w instruction manual - Euro 8 headstock

Very tidy - Tines all present - Has had another set of brackets welded on

Brackets unknown - As new - Very little use

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Straight and strong dunk fork - Not seen a lot of work

Useful size bucket - See the crack and small holes in the picture

Approx 7' - JCB brackets - Needs some repairs as shown in picture - Loading available

Spares or repairs - C/w Euro 8 brackets - Spares or repairs as needs new hydraulic pipes - Missing one top tine and a bottom tine - Hole bracket for bottom tine is damaged

147cm wide - Rear door drops - Bought new on farm and done little work - C/w tipping catch - 3 point linkage

Removed from International B250 - All complete - C/w bucket & tipping ram

Tractor mounted - Cat 1 pin size - 1.1m width - 200l hopper - This has never been used but is very shop soiled

Euro bracket - 1.75m width - Brand new never used

Euro brackets - 1200mm length of forks - Very shop soiled

On euro brackets - 1.55m width - New unused

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

Euro 8 brackets - Very good edge, had little use

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Was a shear grab - Several tines missing - Quicke 3 brackets

Cat 1

Two 2 foot spikes - Tines are loose

To fit a JCB telehandler - May need new bushes

700mm wide - Like new and never used - Pin centre 130mm, 30mm pins dipper - Width 110mm

Solid spikes, option for 3rd spike - Old style Quicke brackets

Solid spikes - Believed to be Faucheux brackets

Some small holes/rust flaking - Believed old style Faucheux/Quicke brackets

Very heavy (steel welded to bottom) - Solid

Marked 10 - Chilton brackets - All tines present - Some rust/corrosion - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 11 - Chilton brackets - Some damage/small hole - Could be repaired - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 12 - Chilton brackets - 1 spike, option to fit second if required - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w manitou brackets - Outside tines have been taken off - Working order - Twin ram

1.7m wide - All tines present - Pipes good - Very little use, like new - Side tines - Euro 8 brackets - Rams have slight rust blemishes but do not leak

Have been cut off with gas.

To fit Merlo - 7'9'' wide - Good strong bucket - Some cracking/splitting to bottom

Spares or repair - 7'6'' wide - Very rusty - JCB brackets - 1 tine missing and part of grab tines - Some rust pits on rams

Quicke No3 brackets - Some rust holes in base - Useable condition

On Manitou brackets - Strong bucket, some wear on cutting edge and a few holes in bottom - Galvanised sutton brush - Has had a repair on arm - Brush good

Manitou brackets - 1780 litre capacity - Blade in good order - Little use - No holes - Only used for grain

Age unknown - Size: 6' Wide x 4' Deep x 3' High - Small hole in wooden base - 3 point linkage attachment

Pin & Cone brackets - Approx 5 tines damaged - Pipes present - Some damage to mesh - Vendor has the rams but not fitted

Hard PX tines - Good working order - Some rust on rams - Chilton brackets - Done little work for age - Genuine dispersal due to relinquishing farm tenancy.

Good working order - Chilton brackets - Genuine dispersal due to relinquishing farm tenancy.

Usable but would benefit with some tlc -