No key - Some rust patches - 3' wide x 18'' deep x 70'' high

Used condition - Marked: Redashe - Useable condition

Recently removed from a flat roof - 1200mm x 1200mm - Aluminium frames

Unused - Original case with 8 sockets

1 x 3/4 impact gun - 3 x 1/2 impact guns - 1 x 3/8 ratchet - 1 x sander/polisher

Working order when removed

Tyres flat

Few taps missing.

Working when removed from workshop - Wiring will need attention - Cast bench/table

Used to support two 1000 litre IBC water tanks side by side - 102cm high, 270cm long and 122cm wide - Stand only no tanks - No assistance is available with loading and it must be removed within 10 days of the sale end

Marked 7 - C/w lance & pipe - Working - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

240 volt - Working condition.

New & unused.

Slight rusting on outside.

Motor in working order - Single phase

Comes in 2 pieces

Capacity unknown but estimated at least 1T each side divided centrally

Single phase - Inc: Extension cable, armoured cable, outlets, control boxes, fuse etc - Used annually for The North Devon Show and always packed up every year and stored in sealed crates inside a shed - Stillages and grates included - No assistance with loading, purchasers must load themselves - At least 3 days notice must be given for collection

Marked 1 - Wooden - Make good tables - Approx 4'6'' diameter

Marked 2 - Wooden - Make good tables - Approx 4'6'' diameter

3 x v-belt model - PTO shaft intact - Working order - Blade good, recently sharpened

New in box

Marked 11 - 2 sack trucks (red ones have 1 flat tyre) - 3 wheel barrows, all useable but soft tyres - Pair of wooden tressles - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 12 - Roof ladder - Aluminium steps - Loft ladder - Extending ladder - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 13 - Approx 24' when fully extendend (approx 12' when folded) -This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 14 - Largest water butt has crack on lid, small one has no tap - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 15 - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 17 - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 18 - Mostly hand tools including the following: new drain rods, 2 work mates, toolbox and contents, hand tools, roofing tools, burning tools etc - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 19 - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 24 - Socket set 110v lighting, 3 x 110v transformers (untested), bottle jacks, spanners etc - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 25 - Stanley compressor is working, other items are untested - Ryobi chainsaw - KGE 3000X generator - Oxford oil cooled welder - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 28 - Variety of fixings, 3 black bins, wooden work platform - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 33 - Some age to racking - Buyer to dismantle and remove themselves - 9' wide x 11' high x 3' deep approx - 5 levels, no shelf boards - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 40 - 2,500kg pallet trucks (working) - It is preferred this lot is collected near the end of the collection period if possible - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Marked 43 - 3 wheeled black boxes - Various trays etc - This lot is part of an unreserved clearance sale due to ill health and the sale of the property. - All lots should be collected on Monday 19th October between 10am-3pm or Friday 23rd October between 8am-12noon with no alternative collection days or times available. - There is no mechanical loading assistance and buyers must load themselves in all cases.

Single mill - Worked when last used but only one intake operating - Motor re-conditioned in 2024

No motor

Single phase motor working

Single phase motor - Unchecked -

Various tools including box of large drill bits - Makita saw (in case) - Pipe bender - Electric cables

C/w stand - Excellent condition - Light use - Many extras (too many to list)

15''-24'' long

8 Marples professional wood turning chisels - 15'' long

Good working order

Special addition

PCL 1/2'' air impact gun - Sealey 1/2'' air ratchet - Sealey 1/4'' air ratchet - All 3 items new and never used in original packaging - No sockets included

As new

Many dividers included

C/w rivets

Little used

Ideal for conversion into a shot blast cabinet or parts washer

Good piece of kit

Variety of tools - Used but as new condition - Description in photos - No battery with sander - 9 items in and out of box

Never been used - Damage to outer box - All contents believed to be present

In working condition

In full working order

C/w blade and in working condition

Surplus to requirements - 240V - Will need fluid

Marked as 14 - Spares or repairs - Tyres perished - Door doesn't close properly - Aluminium chassis

Starts on the switch - Fitted with kubota engine - 497.6 hours - Good working order

Spares or repairs - Not running, hence sale as spares and repairs.

Used for storing lengths of metals - Very strong

Spares or repair - Missing handle

Works as expected

Works as expected

Used for holding welding gas bottles

Vendor has not tried to run

Spares or repair - Old generator in frame on wheels - Vendor has not tried to run

Electric motor - Well used but still runs - 1 wheel is seized.

In working order.

No longer used.

Single phase 240v - In working order - With surface planer, mortiser attachment, spindle moulder with 6 sets of cutters, a selection of circular saw blades, belt sander attachment and a grinder attachment

All with brass tops - 2 BP cans in fairly good condition - 1 Esso can has a few dents and a solder repair on it

Working order

JCB -MS-254SB - Used for one project and now surplus to requirement - Full working order - 240v - Ready to use

Antique hand chisel mortiser, with a variety of chisels - Loading available.

With frame and dyes - Works well - Now surplus to requirements

Cast iron - Used in vehicle restoration - Working order

Approx 3'5'' from end of each eye

Has been used in vehicle restoration for edging sheet metal - Made by a company called Edwards

24m of 150mm diameter pipe work - Plus various bends and valves - 1 x T 250mm in to 150mm diameter - 1 x 250mm diameter bend - 2 X 90 degree bends

9m of 250mm diameter pipework - Plus mixed bends and collars - 18 X 250mm diameter brackets - Square ceiling vent - 4m of 350mm diameter pipework - 3 X 350mm diameter bends, various angles - 1 X 125mm diameter two in to one - Fan (not tested) - 11 X 350mm brackets

3 X Dust extraction hoods 1m X 1m X 700mm - 250mm diameter - 4 X 3m of 250mm diameter - 1 X 3m of 350mm diameter.

Approx 20

Approx 20

Spares or repairs - 6 KVA - Was running when last used - Needs battery - Single cylinder diesel engine - Key start

Marked 1 - As new condition

Marked 2 - As new condition