Conversion bracket No3 - Proper made with lock pins

Spares or repairs - Massey Ferguson loader to Euro conversion bracket - It is homemade and strong but not quite right and needs altering

Only used a handful of times since purchasing new approx 2 years ago - C/w brackets - Working

Gold Star 10 8 roller vane pump - Not used for many years - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Turns freely - Plus spare wheel - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Bottle jack working - PTO air pump not used for many years - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

From case trailed sprayer - Has separate clean water tank

Unused

All new

New

New

10m hose - Blow gun - Brake liner adapter - All new

Top link hydraulic Cat 3 ball/3 ball - CC= 520mm - No oil pipes

1 pair new

1 new pair

New m16-1.5mm

Spares or repairs - Both second hand - One has a bad oil leak - Other one looks OK - Both sold as seen

1 new set of brackets - Only 1 of 2 in picture

PTO shaft 1350mm - 1.3/8 6 spl QR/QR - New

1/2'' BSP ports - Flow control & relief - New & unused

C/w glass - Catch present - One damper missing - Hinge damaged

Spares or Repairs - Has an issue with No1 piston, otherwise complete

Also fits Renault - New reconditioned - Marked AZJ 3261 - 12v - 3.1kw

New

Part No: 112660 - Brand new - Still boxed

L/H rear light - L/H front side light - L/H side light lens

One outer - 2 inner filters - New & unused - Still boxed

New & unused - Universal fitting

New

7 engine heater plugs - Ball joint (front)

New & unused

New & unused

New & unused

1 new pair

New & unused

For MX loader - Hydraulic latching - Not been massively used (loader was back up for handler) - Came off Claas FL100 but should fit all modern MX/Class loaders

Spares or repairs - Body has been replaced with a galvanised one - Paint is flaky but always stored inside so no rust - Couple of minor dinks but structurally sound - Perfect if you have a rusted out topper with good gearbox, pto, belt etc.

2 new kits

C/w brakes, rams, shoes & bearings - 8 stud ADR

Good rotors need springs & some tine hangers - SN: 200

Conversion bracket - Homemade - Well made

Second hand parts New Holland small baler

Fits Chilton loader

Unknown what it fits - Strong.

Timber & galvanised iron. - Good condition

Good condition

Heavy duty - Unused - Measurements in pictures - welded links - Believed to be Fraser. Vendor unable to confirm

Removed from New Holland TM165 - All complete - Palletted up - Can be loaded

1m 50cm overal width - Rusty - Short length of 540 PTO shaft.

Only opened to take photos - Doigt doubles

Manitou 635 130 PS+ bonnet and entire mudguard

Unused

Unused

Roll of John Deere brown cab cladding from Agriline - Loading available (Artic lorry on site)

Spares or repairs -

A number of chain load binders

Approx 6' X 3' - Fork lift slots on heavy metal frame - Surface rust and one end element of frame slightly rusted through.

One end tine, one middle tine - To fit McHale grab.

Came off of a John Deere 3130.

New, old stock - Lucas LRA 100 style.

Have been cut off an implement but in good order

Mud flat extensions for ATV/Quad - Simply bolt on to the rear rack of your quad using the brackets

Fits standard 4'' forks - 5' 8'' (1740mm)

Spares and repairs - Frame as shown in pictures, only lots of parts missing

Spares or Repairs - Engine reboard, new pistons, crank in good condition and oiled - Surface rust on new pistons & block - Been in boxes a long time - Never assembled - Good project for somebody

Used but useful for spares etc

Competition flails - Used but useful for spares etc

Used but useful for spares etc

Various Ferguson linkage parts including top links and stabiliser bars

Spares or repairs - Remains of a Subaru pick up which was sat for several years - Engine does still turn over

Top and bottom

Height - 80'' - Width - 64'' - Has been repaired (welded)

-

Quicke loader brackets for International Tractor -

15 Triple K 'S' tines - Usable condition

New and unused

Triple blades - C/w all mounting brackets, hydraulic pipes and height adjustment.

1790mm high + pins - 1700mm wide plus 110mm pin

1800mm wide + pins

No key - Handbrake working

30m hydraulic hose takes up to 75000psi on a roller - There are 3 rollers, 2 still boxes

To include bonnet, stub axles, pedal drop arms - 12 pieces in total

To include starter motors, alternators, manifold, lights etc - 11 items

To include foot plate, link arms, drop arms, clevis etc - 9 items

20'' drop x 4' long - Clips present

Spares or repairs - Indian copy of a Lister engine - Never used - Parts missing - Would make ornament

Approx 750kg - Thought to be originally a pressure vessel

30'' & 19'' - Boxes nearly full.

2 from shear grab