Marked as 3 - 2 bond timber gold treatment (30 year) posts - 7-8'' X 2.4m - Unused - Purchased for ground the vendor no longer farms so surplus to requirements - Stored off the ground - Multiple other sizes listed from 3-4'' to 7-8'' of various lengths.

Spares or repairs - Believed to be 50 meter rolls - One roll isn't too bad, one has a few holes in it and one has got a couple of very big holes - Tied together with baler cord and a couple of post missing (half the roll is okay)

Unused - Plenty left on roll

Marked 15 - Some new and unused; and some used - Approx 9 new and 5 old ones - This lot is part of a genuine dispersal, the vendor having relinquished his farm tenancy

Marked 16 - With pig tail tops - Some older showing rust - Mostly straight - This lot is part of a genuine dispersal, the vendor having relinquished his farm tenancy

Marked 29 - Working order - This lot is part of a genuine dispersal, the vendor having relinquished his farm tenancy

Marked 30 - To include: 2 full rolls of barbed wire plus a part roll (all unused), 5 part rolls of electric fence wire (used), 5 white plastic electric fence stakes, fencing pliers and a 7' long wooden post (8'' diameter) - This lot is part of a genuine dispersal, the vendor having relinquished his farm tenancy

Marked 79 - 3 part rolls (2 of which look unused) which are all approx 1.1.m wide - Plus one folded roll of plastic mesh fencing - This lot is part of a genuine dispersal

3 X Heavy duty stable fronts - Two locks on doors - kick lock and bolt - 10' x 8' solid wood

Spares or Repairs - Barn-stored clay pigeon launcher - Angle of launch changeable - Foot-peddle launcher - Battery connector - Does not seem to work - Working when used last year - Complete but not working at present

Working when removed

Working order (not PAT tested) - 240volt - Little use

Approx 4' high, various lengths - Good condition -

New and unused - 43'' high

42'' x 28'' x 31'' high (metal)

Good condition

Good condition

C/w mounting bracket - Only been used twice & then dry stored - 6.5hp - Briggs & Stratton engine - No wear on the brush - Starts & runs fine

Roof needs new felt - Could be used as a poultry house

12' stable front (used) - C/w door and wood - Already dismantled

Used 12' stable front - Complete with door and wood - Already dismantled - Metal under door is missing

Used 12' stable side - Complete with wood - Already dismantled

Used 14' stable front - Complete with door and wood - Already dismantled

Used 11' stable side - Complete with door and wood - Already dismantled

Used 14' stable front - Complete with door and wood - Already dismantled

Promatic ranger 8 clay traps - Mounted to a cradle and bolted to a pallet but previously bolted to a trailer - Fully remote control but also c/w cable control as shown in pictures - Adjustable angles and speed - Only used twice a year in 8 years of ownership - Never been stored outside - Mostly been used on a telehandler on hilltop for high bird practice - In good working condition - A reluctant sale-owner putting funds towards a new venture

Top & bottom doors - 44.5'' wide - C/w anti-weave bar - Hinges present

Various sizes - Some cut.

3.6m x 3.5m in total - Galvanised panels - Lockable gate and key present - One side has wooden slide out sides - Has been inside a barn all its life - Good condition - Feltroof to part of run and kennel - Buyer to dismantle

Now surplus

Solid - Approx 1120mm W x 1000mm L x 680mm H - Approx 44'' x 39'' x 27''

Dog basket, leads, harnesses, coats, toys, small kennel etc

3 various size water buckets - 2 plastic feed buckets - 2 flexible plastic feed bowls - 2 sugar beet buckets with lid - 3 round feed scoops - 2 small feed scoops - 1 pump for liquid dispensers

For poultry use - 38'' diameter - Working order

Suits 13.2hh-14.2hh horse - Interchangeable seats - Brass furniture - Winding balance - Spares basket

To suit 13.2 to 14hh - Brass hames - 20'' x 10'' - Patent leather Full Collar and Brass Hames

Brass furniture - To fit 13.2 to 14hh

Full set of pony show wagon harness by Alex Marsh - Suit 12.2 pony - Top quality fine harness in show condition - Patent and black leather with sewn in traced and tail stand

Alex Marsh of Canterbury private drive set - Full set of private drive show harness - Patent and black leather with full split 16'' collar and hames, full and false britching - Alex Marsh made this delightfully fine set of gig harness for his own pony. In very good condition.

Set of pony show wagon harness by Freedman of Toronto - Suit 13.2 pony - Used by Mrs Hayden - Little used and in excellent condition

Part set (no bridle) - Full 21'' collar and hames - Black patent and leather with box keepers on britching and crupper - All in very good condition

Full set of pony pairs breast collar harness in black patent and leather with brass fittings and buckles - In good condition, but not show - Maker unknown but all parts stamped SS362

Traditional style gig using modern materials, steel wheels and undercarriage, fibreglass body and shafts - Very light and strong - A lovely smooth ride and easy access for driver - Shafts are easily adjustable for both width and height to accommodate ponies up to a small horse - Good and sound for pleasure driving and rallies, but would need work to bring back to show condition

Tall pony Viceroy (ground to seat 32'') show wagon - Sound chassis, body, wheels and tyres - Would benefit from a repaint - Splash and dash boards need re-leathering - Sold with 3 sets of shafts (12.2 metal, 13.2 metal and 13.2 wood), together with 4 new unused tyres

Stylish, traditional built, wooden pony skeleton gig on Dennet springing to suit 12.2-13.2 pony - Structurally sound, but would need work to bring back to show room condition

HOLLY DRIVING GIG WHIP

Pair of oval fronted gig lamps believed to be by Alf Hales - In good condition

1 large - 2 small

2 galvanised chicken drinkers, 1 galvanised chicken feeder - All in good condition

Very good condition - Little use since purchase - Stored in shed when not in use - Honda GXH50 engine - Starts first pull - Galvanised frame

Poultry drinkers with pipe and some fittings

Longest length-approx 5 m

Honda engine - Electric start - Powerful machine, only been used a handful of times - In very good condition.

Both have started rusting out on the floors.

Marked 83 - No lids and bent/damaged tops - This lot is part of a genuine dispersal

Approx 18 - As new condition - This lot is part of a genuine dispersal

All complete

Approx 12 x 1m gabion cages - Various lengths 2m, 1.5m, 1m & 50cm - Enough to create 12m x 1m wall (approx)

C/w standard size clay holder and midi - C/w wireless long range remote control, foot pedal control and cable button control - This trap can control two traps from the wireless remote by use of the extra link wire simply plug and play or it can be used to stop/start a ATB wobble base unit - Quick connection battery clips for easy removal and fitting of the battery.

Marked 132 - This lot is part of a genuine dispersal

Good condition - Treeless - C/w saddle stand and cover

3 Metal - 1 plastic - All sound

Cleaned and disinfected - Clips complete - Marked 1

Cleaned and disinfected - Clips complete - Marked 2

Cleaned and disinfected - Clips complete - Marked 3

With necks - CLeaned and disinfected - Clips complete - Marked 4

Approx 140cm x 47cm - Has had little use - Felt roof, wooden frame and wire mesh

9 poly pad style pads - Most in used condition - 3 of them have very little wear and 1 mattes fleece lined numnah

Marked 1 - Usable condition

Marked 2 - Usable condition

Marked as 6 - Tyres appear to be holding air

Marked as 23 - Manual trap - Boxes of Clays - Gun Cases not included

Was originally a field shelter but has been used indoors as a stable - Has 1 bottom door - Made from galvanised steel and plastic - C/w bag of fixings.

Spare pair of Lister star horse clippers (no blades) - Regularly serviced by Clipper Sharp - In good working order - C/w original box.

Not had a huge amount of use - Working order

Marked 133 - Small animal drinkers/feeders - All clean and useable

Spares or repairs - Has been stored outside under cover for many years so nothing turns on it - No cracks in the block - Engine hoist available for loading

Still in boxes - one has the lid off but the other two have lids on - 10cm diameter - Barrel length is 113cm/44.5'' - Length of each end connector is 6cm

Wheeled tub of pick up tines, approx 60 in total

Marked as 95 - Large dog - Approx 3' wide - This lot is part of a genuine dispersal

Marked 96 - Large dog - Approx 3' wide - This lot is part of a genuine dispersal

4 round rubber feed bowls - One with a slight split - One rectangle shape - All used but been washed out

Removed from boat engine - Working order when removed - Kept as spare

To include 2040 bonnet - Drawbar, top link, starter etc - 14 items

Glass good - Latch included - One hinge missing

22'' diameter - Good cast rings

Some with points

2 x 70cm closed - 1 x 60cm closed

Quantity of tines

Used but good condition

150w - Working order when removed

Untested - 12v

Pumps, boxes, shafts etc.

Refurbished & never used since