700mm wide - Like new and never used - Pin centre 130mm, 30mm pins dipper - Width 110mm

Vintage - C/w original clipper head - Additional clipper head - Cast iron frame on wooden stand with toolbox - Very original - Working order - C/w spare blades

In use until approx a year ago - Galvanised - Unbolts from concrete - Believed to have been fitted in approx 2021 - No loading on-site

Approx 5 years old - Very good condition - C/w combi clamp & weighing/shedding crate - Draft pro crate, c/w electric box - 16 solid 8' galvanised sections - 6 curved sections - 1 shedding guilotine gate - 2 opening 'slider' gates - 2 solid 4' galvanised sections - Foot bath section & sides, approx 8' 6'' long - One-way gate - Will be dismantled before collection

Marked as 1 - 5' 4'' diameter x 3' high - C/w pins - Good condition - broken rail has been repaired

Marked as 2 - 5'4''' diameter x 3' high - C/w pins - Good condition

Galvanised - Good condition - Little use

Only 5 years old - Little use - Two fill pipes - No plate on feed bin but capactiy believed to be approx 5 Tonne - 3 leg - 8ft between each - Buyer to remove - No loading available - Access good

Holds approx 2000l - Needs new ball valve

Metalwork sound - No Hangers or Latches

Galvanised - Side opening - Strap - New floor and matting last year - Good condition

Marked 1 - Good condition - Drinking bucket included

Marked 2 - Good condition - Drinking bucket included

Marked 3 - Good condition - Drinking bucket included

Marked 4 - Good condition - Drinking bucket included

Marked 5 - Good condition - Drinking bucket included

Marked 6 - Good condition - Drinking bucket included

Marked 7 - Good condition - Drinking bucket included

Approx 7'6'' diameter x 26'' skirt - Needs a little work - Two tombstones missing

Side and rear opening gates - Good condition - Not had much use

Galvanised steel - 21'' deep x 2' square

Sheeted sides - Mesh fronts - 4' long X 2' wide X 1' deep

Rusty.

Side broken

One side cracked

Cracked.

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

ROUND SHEEP FEEDER

Approx 900 x 700 x 600mm

Approx 900 x 700 x 2000mm

Moores 300 gallon concrete water trough

Approx 8' long x 2' 6'' wide - C/w 2 vintage wheels and 2 plastic wheels (one broken) - Trough appears sound - Some damage to one corner - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Zon export - Not used for many years - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Wooden boards in bottom (all solid) - No pins - Barn stored - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

All 220cm long and all generally straight - All with metal tin bottoms - No pins - Some rust showing - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

C/w ball cock - Double sided - Holding water - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Marked A - All straight and in good order - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Marked B - All straight and in good order - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Marked C - One is in good order and one is older with brackets missing - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Not used for 15 years - Single phase - C/w wooden frame and hopper above roller mill - Working when last used - Wooden frame is approx 300cm high and 130cm wide - C/w control box - Buyer to remove and load themselves - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Marked A - C/w dividing middle section - 175cm wide x 92cm deep x 87cm high - Makers stamp 'Ernest Walters, Wellington, Somerset' - With wooden frame - Rust damage to rear, control divide and floor - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Marked B - c/w dividing middle section - 175cm wide x 92cm deep x 87cm high - Makers stamp 'Ernest Walters, Wellington, Somerset' - With wooden frames - Some rust showing but no holes can be seen - This lot is part of a genuine dispersal on behalf of a deceased estate and the farm is being sold. - Please note that much of the machinery equipment has not been used for many years and the farm has no capability of loading heavy or large lots.

Approx 3' 3'' square - Has all its bars

Plastic - Good condition

Approx 5' wide - Been fitted with stainless steel parts

Approx 5' wide - Been fitted with stainless steel parts

Would make a good garden ornament - Casting broken on top

2'9'' long x 21'' wide x 13'' deep - Hole in one corner - Would make a good planter - Loading available

Shaft is 6' long - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

2 teat - Please note one of the hook on's is broken - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

In plastic box - Working order - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Good condition (no teats) - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Nearly full of formaldehyde - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Approx 1.8m X 1.1m - Slight kink in one side - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Both are bent and damaged - This lot is part of an unreserved genuine dispersal to dissolve a partnership.

Size unknown (photo's show when it was up) - Bought 5 years ago from a dairy farm - Current owner had it professionally dismantled and removed but has never put it up themselves - C/w all bolts, sides, steps and built in stirrer - Approx size is 4.5m high (4 panels)

Marked 1 - Portequip double sided sheep creep feeder - 2.4m long x 1.6m wide - Needs attention as has rust damage and bent at one end - Trough has holes in it

Marked 2 - Portequip double sided sheep creep feeder - 2.4m long x 1.3m wide - Needs attention as has 3 bent legs and some rust damage

Marked 3 - Portequip double sided sheep creep feeder - 2.2m long x 1.3m wide - Needs attention as has 2 bent legs and rust damage

Rubber floor - Galvanised - C/w winch & headstock - Side opening

Very little use, like new - Only selling as bought a clamp

Good condition

C/w timber skirt - 6.5' with 5'' round posts

Marked 2 - Used - Worked when taken down

Marked 3 - Used - Worked when taken down

Marked 4 - Used - Worked when taken down

Marked 5 - Used - Worked when taken down

Marked 6 - Used - Worked when taken down - Slight crack in plastic

Marked 7 - Used - Worked when taken down - Slight crack in plastic

Marked 8 - Used - Worked when taken down

Marked 9 - Used - Worked when taken down

Marked 10 - Used - Worked when taken down

Marked 11 - Used - Worked when taken down

Marked D - Used - Worked when taken down

Marked E - Used - Worked when taken down - Slight crack in plastic

Marked A - Used - Worked when taken down

Marked B - Plastic - Used - Worked when taken down - It is missing the ball float and threaded bung

Marked C - Plastic - Used - Worked when taken down

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

C/w timber skirt - 6.5' with 5'' round posts

Dished bottom - Originally used for mixing wet mix pig feed but has not been used for that purpose for a long time

Has been used for pig feeding - 5.5hp single phase motor with starter - Working when last used but not been used for several years

Heavy duty - 1 x 15' - 2 x 13'6 - Some wear but still fully functional - Solid floor - Genuine reason for sale due to upgrade - Mechanical loading available - No lorry access available on site.

Selection of equipment for assistance with foot trimming cows feet.

Approximately 5-6 years old - Little use - C/w weigh scales - Sliding door - Head scoop & bar - Forklift access - Fully side access doors - Galvanised floor - Charger included. - Vendor no longer keeping livestock