Good condition - Tail gate

Quicke brackets - Tines all present - Some rust holes

Quicke brackets - Lots of rust holes

5'3'' wide - Sound floor - Chiltern brackets - Good condition

4' 7'' wide frame - Spikes 34'' long - Chiltern brackets

4'2'' wide - Chiltern brackets - Good condition - Used recently - All tines and cutters present

Chiltern brackets - 2008 - Some perishing on pipework - All tines present - Some cutters broken off - Still usable if cutters repaired

Good order - Straight tines - Pin and cone brackets (Matbro) - Very strong

Home made - Very strong - Matbro pin and cone brackets - Middle sleeve for extra spike - Working order

6' wide - Good condition - Had little use

Came off a 2000 hour machine - C/w locking pin & ram.

Quick hitch 45mm pins - Strickland 2' bucket never been used.

New and never fitted - 2021 year - No brackets (frame only) - C/w instruction manual - Euro 8 headstock

Very tidy - Tines all present - Has had another set of brackets welded on

Brackets unknown - As new - Very little use

No brackets welded on - 2 new pipes - Pin & bushes tight - Non removable sleeves - Can be loaded

Euro 8 brackets - Removable tubes for the bale spikes - One spike has slight bend, doesn't effect use

Good condition for age - Rams in good condition with no leaks - All working as it should be - Handy bit of kit - Loading available

Six months old - 7ft width - Euro 8 bracket - Done hardly any work - No faults at all - Selling as too big for tractor

Straight and strong dunk fork - Not seen a lot of work

Useful size bucket - See the crack and small holes in the picture

Approx 7' - JCB brackets - Needs some repairs as shown in picture - Loading available

Spares or repairs - C/w Euro 8 brackets - Spares or repairs as needs new hydraulic pipes - Missing one top tine and a bottom tine - Hole bracket for bottom tine is damaged

147cm wide - Rear door drops - Bought new on farm and done little work - C/w tipping catch - 3 point linkage

Removed from International B250 - All complete - C/w bucket & tipping ram

Tractor mounted - Cat 1 pin size - 1.1m width - 200l hopper - This has never been used but is very shop soiled

Suitable for MF135 or similar - Loader boom - Heavy duty bale spike - Concrete weight block - Mechanical loading can be arranged but vendor requires a few days notice to organise

Little work

Euro 8 brackets - Max 1500kg each arm - Tidy - Surplus to requirements

Euro 8 brackets - Very good edge, had little use

On euro brackets, BRU200 - 2.0m width - As new only used a handful of times

Was a shear grab - Several tines missing - Quicke 3 brackets

Cat 1

Two 2 foot spikes - Tines are loose

To fit a JCB telehandler - May need new brushes

Solid spikes, option for 3rd spike - Old style Quicke brackets

Solid spikes - Believed to be Faucheux brackets

Some small holes/rust flaking - Believed old style Faucheux/Quicke brackets

Very heavy (steel welded to bottom) - Solid

Marked 10 - Chilton brackets - All tines present - Some rust/corrosion - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 11 - Chilton brackets - Some damage/small hole - Could be repaired - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

Marked 12 - Chilton brackets - 1 spike, option to fit second if required - This lot is part of a genuine dispersal due to bereavement. All lots are available to view & collect by appointment with the vendors.

C/w manitou brackets - Outside tines have been taken off - Working order - Twin ram

1.7m wide - All tines present - Pipes good - Very little use, like new - Side tines - Euro 8 brackets - Rams have slight rust blemishes but do not leak

Have been cut off with gas.

To fit Merlo - 7'9'' wide - Good strong bucket - Some cracking/splitting to bottom

Spares or repair - 7'6'' wide - Very rusty - JCB brackets - 1 tine missing and part of grab tines - Some rust pitts on rams

Quicke No3 brackets - Some rust holes in base - Useable condition

On Manitou brackets - Strong bucket, some wear on cutting edge and a few holes in bottom - Galvanised sutton brush - Has had a repair on arm - Brush good