S/N 960106 - Barn stored - Last used 3 seasons ago - Skirts good - Front removed for storage - Good condition - Oiled up ready to go

Good working order - Barn stored - 3 point linkage mounted - Cable Controls - 1.3m head - Rear Roller - T. Flails - PTO cover intact - S/N: M1539608 Rearguard slightly bent

About 10 years old - 4m working width - Loading available - Made to have an accord drill on the back - No longer needed as vendor direct drills everything - Heavy frame - 20 tines on 3 rows - Folds to 2.8m

3 phase - Working order - Hopper 3m wide - Belt 2.4m wide x 5.4m - Grading spirals - Two conveyor belts discharge either side - Tyres holding air - Very good condition - Hand control box - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Model TT1000 - Serial No: 100048 - 3 phase - 1m wide x adjustable height - Gradiant control not working but in working order when last used - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

5' wide x 18' long - 3 phase - Adjustable speed - Adjustable legs - Very good condition - Was bespoke made in 2006 - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Working order - 3 phase - Flat belt - Elevator rises as box fills - Good condition - Adjustable height - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

3 belt system - 2 elevators - 3 phase - Centre elevator has recently had a problem, but this has been repaired - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

6' wide belt - Adjustable legs - 3 phase - Discharge conveyor 4.8m long x 105cm wide - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Both takes 4' wide screen with 3' discharge conveyors - One is 8' long - One is 6'9'' long - 3 phase - Working order - Both on double platform - No screens included - This lot is part of a genuine reduction sale due to the vendor having ceased potato and onion production. Any viewing welcome by appointment with the vendor.

Electric controls - C/w PTO shaft - Swivel shute - 1 owner - Tyres holding air - Hydraulic tailgate - Working and in use until recent upgrade arrived - Viewing/enquiries welcome

Model 505XLM - Serial No: 42021 - Mounted linkage - Remote control - Has swivel shute - One owner from new - Has been used for bedding poultry shed and is in good condition - 2 spare screens on different sizes - Will blow chopped straw up to 80m using detachable pipes that are included - Fitted with dust suppression system and wireless remote control

Auto reset legs - Direct drilling - No longer needed by the vendor

Trailed - Serial number: 1CC0630XPFX150056 - PTO shaft - 3.2m cutting width - Good condition - Barn stored - Fitted with new bolt on blades - Ready for work - Regular service each season - Loading available

Can handle logs up to 16.5'' in diameter - Splitting force between 3 - 13T - C/W 20'' chainsaw bar - In very good condition - Original guide bar - C/W 4 and 6 way splitters - Always stored under cover - Serial number: 61-14801 - Only for sale due to ill health

New bearing included for propeller - Galvanised - Hydraulic lift - Some weld to control body - Working order

4m wide - PTO guard intact (1000 PTO) - Tines good (70%) - Packer roller - Done little work in last few years - Good strong harrow - Has crack to one tine holder but still in use - No oil leaks - Was working this season - Barn stored

3m wide - Packer roller - 540 PTO (guard needs attention) - Working order (used this season) - Tines good (70%) - Has A frame and pulley to fit piggy back Accord drill - New clutch fitted last year - No oil leaks - Barn stored

2023 SHELBOURNE REYNOLDS 18 POWER MIX PLUS DIET FEEDER - 18 cubic meters - Rear light board is in shed (not pictured) - Bought new on farm - Has only been used to feed 350 dairy cows in winter months for 3 seasons - Good working order - This lot is part of an ongoing dispersal. The vendor has ceased milking and is relinquishing the tenancy

Good working order - Tank capacity 1248L - C/w electric control box - Trailed tank on galvanised chasis - Tyres holding air - Sprayer 3 point linkage mounted - Adjustable spray jet booms - C/w instruction/parts book - Variety of nozzle jets - Regulary serviced and barn stored - Test certificate expired as not used for the last few years

Transpired 12m dribble bar - Serial No: 916394 - Hydraulic folding and locking - Hydraulic boom sectioning - Working flow meter - LED work lights - Storz coupling - Recent new lay flat pipes - Good working order

Used this season - Good tines - 1000 PTO (requires new cover) - Few oil leaks on tine holders - Two tyres need replacing - Disc coulters - Pipes good - Lights present but untested - C/w stands - Handbook - Odd weld in places - Bout markers (hydraulic) - Tram lining not working

Hydraulic fold - 3 point linkage mounted - 4m wide when in working position - Folds up in width of tractor - Good condition for age - All rings present and good

PTO guard loose - Ready for work - Had new beaters and plates on all chains only had one days use since - On flotation tyres - Some surface rust but barrel is solid - New PTO shaft 2 years ago

3 point linkage - 150kg - Loading available onto a trailer or similar - Serial No: CRH 7064 - The guard in the picture is not included

C/w PTO - C/w control box - Variable speed reversible floor - Hydraulic swivel chute - Tyres have good tread and holding air - External floor and rear door controls - Floor/bed in good condition - Odd blade may need changing - 2 speed gearbox - No brakes or lights - C/w manual - For sale due to retirement - Last used 2 months ago and barn stored

C/w half worn 500mm diamond disc - Fitted with Honda 6.5hp engine - Good working order including water dispenser

Spares or repairs as requires new blades and shear bar - Other than this, is in working order - Kept as a second machine but have decided to move on.

Hydraulic drawbar - electric joystick controls - tyres holding air - c/w pick up hitch - electric spout - PTO cover needs alteration - Working order when last used 5 years ago - Barn Stored

2.45M Cutting width - hydraulic side shift - c/w rear roller

For use as a standalone subsoiler or for fitting on the front of a Kuhn 3002 power harrow (can be made to fit others) - 3m working width - Loading available - Very few acres done as can be seen with zero wear on the legs and feet - Always stored indoors - Turns a power harrow (with drill) into a true one pass machine

C/w grass conditioner - 10' working width - C/w PTO shaft - Good working order - Used up until now with no problems

8' working width - C/w PTO - Loading available - Good working order - Used to date - Some front guard flaps missing - can be front or rear mounted - hydraulic side shift

5 furrow - Slatted boards

4m working width - C/w control box and tramline kit - Working condition - Springs were removed for grass seeds

Belt Baler - String Only - C/w PTO Shaft - Last used 2 years ago. Put away in working order and kept as a back up. - Owned for approx 15 years - 1 rear deflector damaged - C/w front prop - C/w control box and some spare belts

Piggy-back drill on A-frame - Hydraulic markers (slight rust spots on rams) - Lights present but not tested - Extension hopper - C/w control box -

C/w crumbler roller - Discs in good condition - Plenty of wear left

S/N-82883 - Metal work good - New set of reversible points - Hydraulic width adjustment - Land wheel - Full set of skims - Very good condition

2011 Kverneland Accord DA Power harrow drill combination - 3m combination drill - PTO present - Kverneland NGH 301 Power harrow - Good tines, no oil leaks, packer roller - C/w Accord DA drill - Good coulters, following harrow tines - Extension hopper - Electric control box - Hydraulic bout markers - Very good condition (little use)

Tyres good, holding air - Lights need attention - Hydraulic folding into transport width - Plenty of wear still on discs - Very heavy duty - Hydraulic pipes have some perishing

Tyres holding air - 540 PTO shaft (some guards need attention) - Has had some repairs/plating to frame - Used recently - Some rust/corrosion - Hydraulic fold

Remote control - Auto cut off - 750mm film dispenser - 3 point linkage mounted

3 point linkage mounted - Honda GX160 petrol engine - Solid metal stabiliser wheels - Has own oil reservoir and pump - Year 2000

All chains and heads present - Has been greased and has a new hydraulic hose - Has been used for horse poo - Working order - Only for sale as surplus to requirement

1.6m working width - Serial No: 90647 - C/w recent new PTO shaft - Side arm flail topper - Not done much work - Rotor well balanced, does not vibrate - Always stored indoors - Loading available

Done little work - On 8T machine brackets

Pneumatic DL - C/w disc markers - Pipe work appears in good order - C/w PTO - Tyres have good tread and holding air - 3 point linkage or A frame mounted - C/w ESC control box - Hopper solid - Used last year - Barn stored

Working order - Manual headland tilt - All tines present - All new hydraulic pipes - Runs up nicely - Usual age related marks and wear - Folding pins have a little play as to be expected for it age

Hydraulic folding - Good tyres - Hydraulic pipes need replacing

Twin auger - Good belt - Working order apart from scales not working - Side and rear empty - Lights need repair

2.8M wide - Front or rear mounted - Hydraulic side shift - Hammer flail

One owner from new - Electric joystick controls - Telescopic arm - 1.3M head - Working order

Hydraulic folding - Has most of the tines - Hydraulic pipe perished

Kverneland 863 Pro Mode - Electric controls, kept indoors - No PTO shaft - Good tyres - Needs new light, broken bar on door - Mudguard not included

Trailed unit with auger - Only selling due to upgrade - Galvanised chassis - PTO shaft present - Needs new lights

Good tyres - Lights present but untested - Barrel appears to be okay - Hydraulic lid - PTO shaft present

2.8M cut - Fitted with hammer flails - Hydraulic side shift - PTO shaft present - Belt guard needs repair

Hydraulic folding - Approx 6M working width - Lights present but untested

2011 - PTO shaft present - Used this season - Some corrosion to the tin work - Side guard bracket needs repair

2012 - Fitted with slurry door - Good tyres - Lights present - Beaters appear okay - No obvious holes - Slatts and bedchain look okay

Unknown capacity - Fitted with slurry pipe fitting, 1 is missing - Approx 17' x 7' 10'' x 7' high - Lights present but untested - Would need new mud guards - Tyres are worn

Believed to be 1000 model - Good tyres although one is soft - Barrel appears okay - PTO shaft present - No lights - Needs new chain guard

Spares or repairs - Shows 293 hours on clock but not working - Been sat for a long time - No battery or engine cover - Hydraulic folding front tray - Tyres perished

Hydraulic folding - 4M working width - Sping tine and crumble roller combo

C/w PTO - Only used for straw - C/w control box - Working order - Lights need replacing - Some damage to front corner which has been fixed - C/w manual - Knives in reasonable condition - Swivel schute - Used on a beef and sheep farm - For sale due to reducing livestock - Tyres have good tread and holding air

C/w PTO - New bearings, grease, seals in main bed, new belts - Only cut 10 acres since being refurbished - Skirt tidy - All working as should - Blades in good condition - For sale due to reducing livestock

C/w PTO - Hydraulic folding - New brake shoes in stabiliser arms - Odd tines missing but will be replaced - Used this year - Working as should - For sale due to reducing livestock

Never been used - Sat in yard from new - 9m working width - Hydraulic valves - Coupling for umbilical cord - Can be tanker mounted - Rubber boots - Bent spring on one valve

Owned from new - Hydraulic axle - All tyres good and holding air - 4 rotor rake - Electric control box - 12.5m working width - Hydraulic brakes - Lights all working order - All guards present - All good tines - No welds visible - Has had a complete set of new tines this season

Spares or repairs - Bought as a project but never used - Hydraulic-driven pump - Steering axle- sprung axle and drawbar - Tyres holding air (600/55 R22.5) - Air and hydraulic brakes (untested) - Lights present but untested - Hydraulic top hatch - Hydraulic front fill pipe and valve - Hydraulic sand agitator - Requires some new hydraulic pipes - Has been sprayed with oil

2016 Shelbourne Reynolds 3200 Powerspread Pro - Tyres holding air-560/60 R22.5 - Sprung steering axle - New PTO shaft and spreader flails - New shaft bearing - Air and oil brakes-working - Lights present and working - Tidy for age - Working recently - Oiled up for storage

Requires new PTO guards - Has been used recently - Packer rollers - New set of Tungsten tipped tines recently - Hydraulic folding - One wheel eradicator tine missing - Good condition

Serial No: 30655402OLL - 4m reach - Cable controls - T flails - Dual direction flail - Totally PTO driven - 3PL mounted with stabilisers - All working well and flails runs very smoothly - Serviced last season with new oil, filter and flails - Has been on a golf course and only sold due to purchasing a larger tractor so need bigger machine - Very tidy condition - C/w operators manual - Loading available

Serial No: 123185 - 1.8m cut - Hammer flails - Adjustable offset - Rear roller - Runs very smoothly having done little work - Paint still on rotor and back of flails - Only been used a few times from new and sold due to changing tractor and needing wider machine

Joystick controls with cable stop start - One owner/farmer from new - Always dry stored - Oil cooler - 500 rpm gearbox - Light kit - Good set of T flails - Good and tight on all pins and bushes - Has not seen hard work - Runs well and quiet with no vibrations - C/w power leads to control box - Loading availble

Saw and 4 way hydraulic splitter - Made well using a major logging bench - Has an extending log holder, covered cutter with sharp blade - Log length gauge - The log drops into log splitter powered by tractor hydraulics, has a 4 way splitting head - Has just been used and did 40 dumpy bags worth, has worked well

1,350L capacity - Serial No: 5362 - Disc spreader - Hydraulic shut off - In good condition - Been stored indoors

Good working order - Headland management - Good tyres - New Hydraulic folding ram - Can be seen working - Loading available

Serial No: 335-82/3 - Folding cambridge rollers - 6m working width - 1 new tyre and 1 worn - Loading available - C/w breaker rings - New pipes 2 years ago - C/w several new poly block bearings - Sides roll easily dismantled for loading - Only known fault is one 1 of the tyres is perishing but holding air

1 owner from new, sale due to retirement - 2.8m cut - Hydraulic side-shift - Had little use from new and dry stored - C/w rear roller - C/w support leg - Front or rear mounted from either side - Clean paint work - C/w PTO shaft - C/w operators manual - Owner can load using diesel forklift, or if alternative is required could organise with notice given

In good working order - Plenty of wear still left on slitters - Good bearings - Good strong solid frame - Ready to go straight to work

C/w 7 x 50mm wrap - C/w control box - Cable control - Mechanical knife - Electric counter (not original) - Unknown bale count - 4 new turn table belts last year - One new tyre last year - Used this season

Please note-needs a small patch, and one tyre has a slow puncture - Pump is in good working order - Used this year

Twin axle - Good bearings and chains - Tub is in good condition and lid has been rebuilt this year - Brakes working

In running order but wiring work is needed, 2 control boxes are included - Has been dry stored

4' cutting width - Working order - Battery needs replacing

Serial No: 1244 - 5.5m working width - C/w PTO shaft - Believed to be made in early 2000's - Loading available - Good old usable machine only for sale as bought a six rotor machine - No known faults has usual wear for an old machine - Bit of play in rotors but does the job

3.5m cutting width - C/w PTO shaft - No grass conditioner - GWO - Very tidy for age

C/w PTO shaft - Very tidy for age - Still on original tines - Some tines missing

Electric control - 3 point linkage - Has had a new pump, motor and gearbox in recent years - T flails - Runs and cuts well - 4.8m reach

Hydraulic folding - Lights

4m working width - Hydraulic folding - Road lights - Ridge packer

Working order - C/w twin blades to chop grass - PTO guards need attention and deck has some rust holes

Working order - Needs some welding on the frame and deck has surface rust

Hatzenbichler seeder - Good working order - Needs odd replacement tine - 6m working width - Lights untested - Loading available

Working order - Lights working - Brakes working - Pump working - Flotation tyres in good condition - Pipe carrying hooks down one side - 1 rear fill port - 2 blanked off front fill ports can be used if wanted

Wheel drive - Windrow kit - Dahlam rollers - Good working order

2015 Dowdeswell 145 series MA 8 furrow Reversible Plough - ON land and in furrow - Manual vari-width - Rear disc - Depth and transport wheel