Working order - Needs belt guard - Has new tines to come with it - Approx 4' working width

In frame (10' 8'' wide with frame) - Water filled (full at present) - Can be lifted on 3 point linkage - C/w additional weight frame on top - Clevis pin hitch

Not used for 6 years - All straight - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

Used 2 years ago - C/W PTO - Tyres holding air - Working order - Some rust damage barrel has no holes but showing rust - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

Last used 5 years ago - C/W PTO - Working order - Always dry stored - Crack on top of spreader - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

Folds out to 9.7 metres width - Approx 500 litre tank - C/W PTO - Not tested - Not used for approx 10 years - Nozzles, pipes etc will need attention - This lot is part of a genuine reduction sale, the vendor no longer actively farming or keeping livestock.

In a wooden frame - It has the benefit of an additional weight on top - Always been barn stored, used this year - Works well in a field or horse menage - Will fit behind a tractor or quad - Roller is 1750mm wide, and with the frame is 2100mm wide - Vendor can help with loading

Spares or repair - Free and turning but discs are rusted right out and need replacing - Used last spring - Lights to rear (untested) - 3 bag capacity +

Tyres holding air (some perishing) - Raise and lowers with handle - Working order - 25' long - Belts not pictured but will be provided

Spares or repairs - Bamford & Sons - Worthy of preservation

Spares or repairs - Some brakes

Very strong - 9' wide - Tines all present

Honda GX340 engine - Tyres holding air - Working when last used

Working order - C/W electric motor - 13AMP - 2 flat tyres

Spares or repairs - Galvanised body - Needs new bearings and PTO shaft - 3 point linkage mounted - Ram pitted

Will hold 3 1/2 600kg bags - Tyres holding air - Working order when last used - Barn stored - Hydraulic shut off

In wooden frame - 6'5'' overall - 12'' diameter - Loading available

Marked 1 - In frame (5'6'' total width with frame) - C/w bungs - Water filled (empty at present) - This lot is part of a genuine dispersal, the vendor having ceased keeping livestock. Please note there will be a viewing day on Friday 15th May between 10:00am to 4:00pm and a collection day on Friday 22nd May between 9:00am-5:00pm. Please follow the 'To the sale' signs for the viewing and collection days, the postcode is EX18 7AR.

Marked 5 - 51' wide and approx 5' long - C/w bar and chain - All complete - Done little work - This lot is part of a genuine dispersal, the vendor having ceased keeping livestock. Please note there will be a viewing day on Friday 15th May between 10:00am to 4:00pm and a collection day on Friday 22nd May between 9:00am-5:00pm. Please follow the 'To the sale' signs for the viewing and collection days, the postcode is EX18 7AR.

In good working order - All reels are good - Good shear bars & good rollers - No leaks - Control cables need replacing

Straight - Makers mark

In wooden and metal frame - Total width with frame is 6' - Metal weight frame - Granite roller is 19'' diameter - Vendor can assist with loading

Working order

Has done 10-12 hours work - Was purchased by vendor for a one off job which has now been completed and is therefore surplus to requirment - New in June 2025 - Very good condition - Small wearing on the bales - Requires 25HP plus

1M cut - Loading available

Was last used 7 years ago and put away working - Old wooden floor over layed with steel - Loading available

Owned for the last 17 years and only been used to cut 10-15 acres each year - Used last season and in good working order - Ready to use - C/w blade changer tool and PTO shaft in good condition - All guards intact - Cutting width 5'6'' - Loading available

Fransgard RV300 combi rake/hay turner/haybob - Serial No: 133466 - 3 metres working width - PTO shaft - Tidy piece of kit in working order - Couple of new tines already added - Comes with gates and guards around motor - Comes with new tines and springs - C/w manual - Ready to go straight to work

C/w PTO (will come with new guard) - 1m working width - Barn stored - Working when last used 4 years ago - Good blades - C/w manual - Front bars slightly bent

12'' furrow width - Good wearing metal - All turning as should - C/w land wheel - No cracks or weld

BAMFORD FISKARS 4 FURROW CONVENTIONAL PLOUGH - C/W discs - Good metal work - Model A872 - Weight box welded on rear - Good and strong

240V - Working order - Straight

Bought new on farm - Barn stored - Tyres holding air - Last used 4 years ago

To suit quad bike or compact tractor - 4'4'' wide - C/W bar and chain - Good condition

Tyres holding air - Used last year - Requires a few new tines and springs

Not been used for many years - Tyres holding air - One axle bent

Tyres holding air - Used 2 years ago - C/W quantity of spare tines

Original condition - Barn stored for many years

All complete - Wheels have been unclipped

Roll 6' wide - Drawbar bent

Galvanised hopper - Barn stored for many years

Marked 115 - 27 KVA - C/w PTO shaft and switch box - Not used for many years - Was in working order - Electrics have been disconnected - Buyer to remove - This lot is part of a phased dispersal sale. Viewing is available between 9am-12noon on Thursday 14th May. Collection of items is preferred on either Thursday 21st or Tuesday 26th May between 9am-12noon.

9' working width - 3 rotor topper - Good wide skids - C/w PTO - Loading available

60L tank capacity - 12v - Had very little use - Full working order - Less than 12 months old - C/w boom (not been used and still in package) - All connections included

S/N: 1160R04 - PTO - Just had new belts fitted - Loading available

C/W tap

One ring missing

Has had an extension put on but not finished - Approximately 12' X 30' with a 15' X 15' extension (this has not been measured accurately and any purchaser should satisfy themselves), New roof, new wood, old log burner, kitchen heater and stable door - Buyer to dismantle and remove - Viewings welcome

C/W 5 disc coulters - No welds on main body - C/W skims not pictured

Last used about 2 years ago - Size unknown - C/W splash plate - C/W pump (new vains approx 3 years ago) - 1 tyre has soft puncture but will be pumped up

Marked 11 - Spares or repair - Lucas Castor 30R Straw Chopper - Bed only turns half round - Control box needs attention - Has been in use this winter - Swivel shute - Tyres holding air - No lights - No guards on chains etc, new guards should be fitted before use - C/w PTO shaft - Sold as spares or repairs due to faults - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 24 - Solid framework - Reasonable rubber - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked 30 - Flip over style - Bobcat brackets are removable - Adjustable width wings - Rubber looks ok - This lot is part of a genuine dispersal sale due to end of farm tenancy. Viewing and collections by appointment but all lots should be collected and removed by 23rd May 2026 (no access will be permitted after this date)

Marked as 3 - C/w controls - Dry stored - This lot is part of a phased dispersal sale and being sold due to retirement.

Good working order - Barn stored

Good working order - All tines present, all springs work - Tyres perished but holding air - C/w PTO - Has had previous welding on headstock

Been dry stored for several years but seams to be all freely moving

Been dry stored for several years

Working fine when removed

Spares or repairs

Spares or repairs - C/w control box but needs testing/ repair - C/w PTO shaft - Made bales in 2024 be manually triggering netting cycle but not used last year

Year unknown - C/w PTO shaft - Loading available - Bed is rusty & holes on top of bed - Been used last year - Viewing and enquiries welcome

Little use - Serial number: TMD07311

Solid tub - C/w PTO shaft - Working order - Some corrosion on base of skids but still solid

C/w hydraulic power pack - 6ft wide

Folding - SN: PS13 3486 - Little use - Loading available - Mats in good condition but rust on frame

Pull cord needs replacing - Good condition - Rubber not worn - Adjustable and reversible

Seized solid

Adjustable width

C/w whippletree - 1 x 26 rings - 1 x 32 rings (2 damaged/1 spare) - 1 x 34 rings - Loading available with tractor and loader

Used this winter - Significant holes in tub - C/w PTO shaft - Flotation tyres (1 slow puncture) - Lights present but need attention - Spares or repairs although it does work

Spares or repairs - Take or leave what you want - Damaged framework

Slatted mole boards - No welds - Land wheel - C/w some spares - 4 x 1

Knock down points - Some corrosion on points - Crumbler roller - Missing front board

5 tines missing - Tyres holding air (some perishing) - Hydraulic folding - Used in 2025

Good disc and mole but top needs attention - Solid framework

1 owner from new - Approx 1940's - Last used 40-50 years ago and dry stored since - Free and turning - Tyres soft and condition unknown - 42'' fly - Owner happy to try and assist with loading and may be able to move to field to load or provide mechanical assistance - Buyer must take whole unit

Spares or repairs - Tub solid but there is some significant rust around tub - Not used in the last 8-10 years - Flotation tyres with tread but some perishing - Solid drawbar - C/w PTO shaft

Serial Number: 64661011 - C/w PTO shaft - C/w Control box - Good working order - Owner driven for last 10 seasons - Regular serviced - Stored undercover - C/w additive applicator & barrel, operators & parts manual

Serial No: 911435241 - Working condition - Dry stored for last 3 years - Not needed hence selling

4 Row working width - Loading available - In good working order - Used last year - Stored inside - Hydraulic bout markers

Serial Number: 88R5333 - 2 row working width - C/w PTO - Loading available - Worked well when last used a couple of years ago - Ran ok when hitched up to take photos - Stored inside

Believed to be a 2010 - Serial Number: M1226252 - 9' working width - C/w PTO but PTO guard is missing

Good solid machine - Bought new to top the pasture on our small holding - Always kept undercover - 6' working width - C/w PTO - Loading available

3 point linkage - Lights untested - Loading available

Tidy condition - Some rust on guards - PTO shaft present - Skirts intact - Slight cracking on hood bearer - Working order - used last year - Selling due to upgrade to larger cut

Good working order - Ready to work - Has some pin hole rust on top but nothing major

In good working order - All tines present - Good ram

Fitted with high flo 9 ltr per minute 12v pump - C/w new lance fitted to hose - Has boom connection - Working order - Just missing glass on pressure guage

4' working width - 14'' barrel with no leaks - Water filled - Would also be suitable for lawn tractor

Single phase - 26KVA Bradley (Froment) - On 3 point linkage - C/w new PTO shaft, lead & 125amp plug - Used as occasional standby - Tested regularly

For conventional bales - New wheels 3 years ago - New front end 3 years ago - Have changed balers and therefore require different sledge.

Spares or repairs - 1500L capacity - Hydraulic shut off - Error with one side - Disc spread.

In good condition - Mounts on 3 point linkage - Cat 1 or 2 pins - Ideal display or show piece at a rally or could be used - Barn stored - Loading available.

Spares or repairs - Deep digger plough - Adjuster is seized and disc - For restoration - Furrow wheel is free.

C/w PTO shaft - 5' cutting width - 2 mowers - 1 is complete apart from swath board - The other is for spares - Both will need attention - Couple of spare blades - Loading available

3 point linkage - 9' working width - Loading available.

In working order