C/w fine chop - Serial No: 85229- - Trailed linkage - Swivel shute - Lights working - Tyres very good condition - 1 owner from new - Very tidy machine - Fitted with fine chop, retractable knives and retractable sieve

Serial No: 1072 - Trailed linkage - Swivel shute - Lights untested - Working order

Owned from new

3.1m wide - 1.4m leg spacing - Simba legs & metal - Hydraulic legs - Solid framework

One owner from new - Good working order - Reconditioned control box - New floor motor

3 point linkage mounted with self load - Spool control - Good condition - Only been used on saw dust - Could be mounted on loader or skid steer - Always been stored in the dry - Only for sale as the last of the cubicles have been taken out

Only bought this year ON FARM - Working order - Used this year (cut 60 acres) - C/w PTO

Single blade - Very little work - As new condition

Good metal work all round - Classic cutters - Eradication tines - Marker arms - New fan bearing fitted last year - Lights in good condition - Packed away last year ready to go to work, opportunity arose to upgrade after using for 6 seasons - Maize drill set at 75cm spaces and can be adjusted to suit

Serial No: 814071 - Good working order - This lot is part of an ongoing dispersal. The vendor has sold the milking cows and relinquishing the tenancy

Dual spreader - C/w PTO - C/w greedy boards - 1 tyre bigger than the other but holding air - Working - Brakes and lights present untested - Hydraulic door open

2.8m - GF2018C - Believed to be 2010 - Last year had all new sponges and has not been used since - One pass direct drill - Will plant all sizes of seed - Land drive - C/w a few spares

9' working width - C/w filling bungs - Rollers are currently empty - Tyre condition approx 90% tread - Loading available - Fold up for roads

Single phase (230 volt) - C/w control box - Bought new in 2023 and very little use - Good working order - Vendor will get generator disconnected electrically, buyer to remove

System disc - Pre emergence markers - Following harrows - Hopper extension

Very tidy condition - Galvanised frame - Solid, straight, tidy order

Solid skids - C/w PTO shaft - Very tidy condition for age, had limited use - Working order

Solid metalwork - Crumbler rollers all solid - Front levelling bar - All tines present

Spool lever controls (10 functions) - C/w racks spike (hydraulic) - Left/right hydraulic adjustment - Forward/back tilt adjustment - Hydraulic legs - Good rope - All pipes present (some perishing) - Strong, well built post banger

Incorrect model stickers on baler - Flotation tyres with good tread - Rota-feed - 62,789 bales on clock - 2.3m pick up - Slight damage on inspection ladder - Lights to rear - PTO shaft needs replacement cover before use - C/W control box - 1 knotter sensor can be temperamental

New PTO guard -3003 hours - Sideboards - Bed has had new bearing seals and grease ready to go to work

Serial No: 00MA36236 - Good wearing metal, nearly new points and wings - 4+1 configuration, DD bodies, pin adjust skimmers, manual vari-width with hydraulic front furrow and depth/transport wheel

1.2m head working width - 5.5m maximum reach - 3 point linkage - C/w PTO shaft - Lights working - Serial No: M143567 - Electric joy stick - Owned from new - In used condition - Loading available by appointment

Tidy well looked after topper - Washed and barn stored - 2.8m working width - C/w PTO - Loading available

6.6M telescopic reach - 1.3m head - Low pressure joystick controls - C/w PTO shaft - 3 point linkage - Lights working - Double sided flails - Oil filter has been replaced not that long ago - Oil leak on the head rotor - Oil leak on the bottom of the oil cooler - All pipes are in good condition - Loading available if required.

Some surface rust - 5 chains are missing their end flail/lug - Good working order - Tidy for age - Not had a lot of work in the last three years - C/w PTO shaft - No control box - Good tread on tyres - No holes in the barrel - Bearings all good - All greased and ready to go.

2012 AMAZONE ZA-M 3600 ULTRA HYDRO SPREADER 3.6T capacity - Disc spreader - C/w hydraulic shut off - C/w control box

2001 Lemken Semi Mounted Vari Diamant 7 Furrow Reversible Plough - Manual vari-width - Serial No. 5/1/1 L100 246 171

Hydraulic tramline markers - Vector discs (2 rows) - Trailing tines - SN: 27655 - Rubber covered trailing roller

8' swing around - In good working order - With full shaft.

Serial number: 11492 - 11000L pump - Sprung drawbar - 800/65 R32 tyres - LED lights - Lights and brakes present and working - PTO shaft

3 metre AD-P303 special combination drill - Electric metering - Electric calibration kit - C/w levelling board, Rubber packer, single disc, following harrow - Good tines with plenty life left on them - Used last year in November - Only selling due to upgrade

Used condition - Works perfectly - Had a couple new seals last year and new tines - Only done 60 acres since - Serial No: 1234 - Packer roller - PTO shaft - Loading available

SN: ED85-200-8HD - Manual Vari-width - Missing disc on the last furrow - C/w box of spares

Has been heavily modified and can pull through tough conditions, can fit up to 32mm water pipe - Welded solid so no shear bolt to worry about - Selling due to change in circumstances

Very heavy duty - C/W PTO shaft - Previous repair to hydraulic ram as pictured - 1.8m working width

Lights present - C/w cover - 0.9 m3 capacity

Tidy machine in good working order - C/w water filled ballast barrels

Combination unit - 9/400 K-DS drill - Lemken Zirkon 10/400 power harrow - Hydraulic folding - C/w full set of new power harrow tines - C/w control box - Current owner has owned since 2019 (2 owners from new) - C/w packer roller, disc coulters & trailing tines

Hydraulic folding - 2.5m transport width - Can be fitted to slurry tanker (2000G+) or umbilical system - Tidy order - Enquiries & viewings welcome

Spares or repair - Main cog worn out - Tyres have some tread & holding air - No PTO - Chassis solid - Brakes & lights present but untested - Some holes to tub - Beater showing some wear but useable - Auger in reasonable condition

C/w PTO - Hydraulic control type - 3 point linkage - In good order - Loading available

Unknown if working or not

Spares or repairs - Not used for up to 20 years so sold as spares or repairs - Used by Beares for mobile repairs years ago - Dry stored - No PTO

Working order

9' rowing width - All tines present - Recent new shaft, crownwheel & pinion - Tyres good & holding air - Tidy for age - Selling due to upgrade

Spares or Repairs - 8' working width - Tin work has several holes that need patching - Skids are worn and need replacing - Machine is mechanically sound, new rear gearbox, rubber donuts & shaft between gearbox 2 years ago - Would benefit from a new set of blades - Loading available

Spares or Repairs - Year unknown - Trans megacut mower condition - 3.1m working width - C/w PTO shaft - Missing a skid plate - Blades worn - Older machine, usual wear & marks - All working when last used, has not been used since 2024 due to a replacement machine. - Its a good designed machine, perfectly combining a trailed and mounted machine - Tows in line behind the tractor, approx 5' wide in transport - Machine carries its own weight on its wheel when in work - Good for steep ground - Has been used for topping cow paddocks & mowing silage since 2019 - Will go to work happily with a little bit of TLC

Twin disc - Perfect model - Hydraulic shut off (untested) - Odd small hole in hopper - C/w PTO - Please note this lot is part of a genuine dispersal due to a deceased estate. Viewing available by appointment & a collection weekend will be held form Friday 13th February - Sunday 15th February 10am - 4pm.

Previously rebuilt - Dry stored - Working order

Working when last used - 540 PTO shaft - Make unknown - Rust on tub

C/w PTO shaft (new recently) - C/w roll-over cover - 2 x S500 hopper extensions - Same owner for a long time - Working order, used in 2025 - Some corrosion on tub in places as pictured

Working order - New PTO guard required

Spare or Repairs - SN: 29522 - C/w PTO shaft - Needs patching to the drum - Not been used for 2 years - Lid still solid - Running gear all still good

C/w 800l front tank with suction pipes - NSTS MOT runs out 19/05/26

Untested - C/w pipe & lance - 60l capacity - Please note this lot is part of a genuine dispersal due to a deceased estate. Viewing available by appointment & a collection weekend will be held form Friday 13th February - Sunday 15th February 10am - 4pm.

C/w hydraulic power pack - 6ft wide

Spares or repairs - No PTO - Has been unused for a long time and will need servicing and or possibly ew belt chains freeing off etc - Heavy duty machine - Collection days 12th/13th and 21st February 9am to 2pm

Spares or Repairs - Age 2009 - C/w PTO shaft - 16T capacity - Blade in poor condition - One fairly new tyre & other in ok condition, all holding air - Warn augers - Weigh scales inaccurate - C/w spare auger gearbox

Well built not been used for 2 years - Was working when last used - Rams have some surface rust but are not pitted - Some tines are worn but still useable

Not been used for 12 months due to upgrade - Works well but rubber is worn down

French make: Continental motoculture - Type: AL100 - Single row - Tyres flat & perished

In good working order - Has been used every year to bale our hay - Always stored inside when not in use - Viewing welcome

Spares or repairs - Pipe cracked - PTO shaft - Been standing in yard for a few years - Tyres good

In good working order - On ball hitch, tows well - Can be worked in offset or straight behind - Has been serviced - Battery will be fitted properly before sale

Has 15hp Kawasaki engine - Had little use and comes with a new set of blades

Part way through being converted from hydraulic controls to cable controls & will need finishing before useable - 1.3m head - Some rust on rams - C/w PTO - Pump believed working - Please note this lot is part of a genuine dispersal due to a deceased estate. Viewing available by appointment & a collection weekend will be held form Friday 13th February - Sunday 15th February 10am - 4pm.

1.1m head - Rust on ram - Not used in many years - C/w PTO - Assistance with loading available - Please note this lot is part of a genuine dispersal due to a deceased estate. Viewing available by appointment & a collection weekend will be held form Friday 13th February - Sunday 15th February 10am - 4pm.

8' - Solid & full - Worn but works

Hydraulic mast tilt - Manual mast slew - One old style hydraulic coupling - Working - Good weight

Approx 3m working width - No lead bar - All points present

Single spool lever - 3 point linkage mounted - Hydraulic pipes present - Hydraulic pressure unknown - Can be loaded with tractor if collected promptly - This lot is part of a genuine dispersal sale. Lots are available to view with the vendor on weekdays from 9am - 12noon only strictly by appointment only. Lots must also be collected within 2 weeks of the sale closing, again strictly by appointment and between the hours of 9am - 12noon.

C/w 4 trailing weights - Lead bar has some bends but solid - Web has some minor faults but is reasonable - This lot is part of a genuine dispersal sale. Lots are available to view with the vendor on weekdays from 9am - 12noon only strictly by appointment only. Lots must also be collected within 2 weeks of the sale closing, again strictly by appointment and between the hours of 9am - 12noon.

Solid frame - Cannot be loaded, believe to be filled with concrete - This lot is part of a genuine dispersal sale. Lots are available to view with the vendor on weekdays from 9am - 12noon only strictly by appointment only. Lots must also be collected within 2 weeks of the sale closing, again strictly by appointment and between the hours of 9am - 12noon.

6' cut - C/w top link - Dry stored - Not used recently by owners but believed to be in working order - Solid tub - Adjustable land drive wheel - In its working clothes - Small loader tractor on-site only - This lot is part of a genuine dispersal sale. Lots are available to view with the vendor on weekdays from 9am - 12noon only strictly by appointment only. Lots must also be collected within 2 weeks of the sale closing, again strictly by appointment and between the hours of 9am - 12noon.

Spares or Repairs as PTO guard missing - Old & tired but still mixes concrete

Spares or Repairs - C/w original PTO shaft

Solid wheels - All tines present - - This lot is part of a genuine dispersal sale. Lots are available to view with the vendor on weekdays from 9am - 12noon only strictly by appointment only. Lost must also be collected within 2 weeks of the sale closing, again strictly by appointment and between the hours of 9am - 12noon.

Spares or repairs - Supplied by Symons - Rubber fairly worn on one side

Spares or repairs - Has been welded in the past

Good web/ chains - Solid framework - Manual folding

Solid framework - Cast wheels - Approx 9' wide

Believed to be 15 KVA+ - C/w PTO shaft - Not used recently

8' roller in a 9' frame - Believed to be empty (bungs present) - Solid framework - Rear scraper bar - Wooden bearing blocks - No loading assistance on-site but could be winched onto flatbed or similar

Lead roller - Strong & straight framework - No loading assistance on-site but could be winched onto flatbed trailer as located in accessible field

Good condition - C/w PTO shaft - Solid skids

Spares or Repairs - Rotating barrel - Sold as Spares as although it functions needs some TLC for ongoing use - Good bearings, some recently replaced - C/w PTO shaft - Tyres holding air - Some holes in tub - This lot is part of a genuine sale, due to the vendor relinquishing their tenancy. All lots should, where possible, be collected by buyers within 2 weeks. Unless alternative arrangements have been made with the vendor.

Working - This lot is part of a genuine sale, due to the vendor relinquishing their tenancy. All lots should, where possible, be collected by buyers within 2 weeks. Unless alternative arrangements have been made with the vendor.

Ram resealed, need attention

Ideal for small tractor - One side of feet has little use

Spares or repairs - Year unknown - C/w PTO Shaft - No Control Box - Lights and Brakes untested - Has not been used for over 40 years - Has been barn stored since last used - Original tyres 7.5-24) still holding air - Serial No. 3208

Hydraulic shut off - Disc spreader - No control box

GX 160 engine - Serial number: RS120 - Good working order

Spares or repairs - Last time it was used it had slipped a gear and the tines were hitting - Loading available

Spares or repairs - 2000kg capacity - Hydraulic shut off - Showing rust - Border control has come off on one side

Year unknown - 2 legs missing - 2.7 meters working width - Loading available

60CM diameter - Ball hitch - Rear 3pnt linkage brackets for transport

Compact set of grass harrows - Make unknown - Solid frame - All tines present