1 Owner from new - SN: 349440 - C/w PTO (needs new guard before use) - C/w manuals & instruction - Not used for last two seasons but was in working order - Enquiries & viewing welcome - Tyres holding air - Dry stored excluding the shute which needs on patch plating

Mounted sprayer - 1 owner from new - 15m boom width - Recent pump overhaul & new bearings, diaphragms - 300 acres covered since the above work - Paint flaking on beams but no welds - Last used in June 2025, test certificate has expired in July 2025 - Sale due to contractors now carrying out work

1 owner from new - Type: Ha1200 S IV - Auto-reset - Hydraulic variwidth - Depth wheel (tyre has tread) - Slatted mole boards - Rear Discs - No welds - Shear-bolt - C/w parts guide - Metal reasonably good throughout - Always dry stored - Relevant sale due to work now being contracted out

Petrol engine driven - Own oil tank - Twin ram set up - Can be set up to run off tractor spools

Joy stick controls - log deck pipe work & spool valves - 2, 4 & 6 way wedge - 5m long elevator - C/w speed control - Swivel exit conveyor - Serviced & maintained by Halse - C/w David Brown 1490 4wd tractor - Year unknown - Hours unknown - No V5 - In working clothes - Used daily - Starts & drives ok - Tyres holding air but some perishing, front have about 80% tread & rears have about 40% tread - Door & panels are present but need refitting - All glass except lower rear panel present

C/w filling bungs - Good condition - Loading available - A large 36'' barrel and 14MM thick drum

15,495 Bale count - Cable controls - Hydraulic driven - Working order - Used in 2025 - No rust on hydraulic rams - Lights present but untested - Tyres have good tread & holding air - Farmer owned - Belts in good order

Bale count: 33,762 - Barn stored - C/w PTO - Tyres have some tread - Used in 2025 - Tyres worn - C/w chopper knives - Auto chain lube - Chains tight - Lights present but untested - C/w control box - Maintenance carried out by main dealer - Farmer owned for last 7 years - Makes good firm bales

C/w packer roller - A recent model in good condition

C/w levelling boards & packer roller - In good condition

Tramlining, markers, double following harrow & track eradicators - In good condition

Capable of driving up to 10' tall posts - External lever controls for improved operation and safety - 250mm telescopic side shift for improved machine adjustment and compact transport position - Hydraulic powered slew with a 120 deg working area - 20 degree forward and back hydraulic mast tilt and 35 degree side to side hydraulic mask tilt - Quick release 270mm throat width gripper plate with reinforced rubber for noise reduction - Adjustable front and rear legs - Several optional extras: larger weight option of 240kg, hydraulic rear leg, 60mm rock spike and hydraulic extractor kit for piloting holes through hard and rocky ground conditions - Farmer owned from new and always stored inside - Recent new rope fitted

Single rotor - Made in 2013 and purchased new in 2014 - Good condition - Off a small beef and sheep farm - Used last summer and always barn stored - Selling due to buying a twin rotor rake -

3 point linkage - Serial Number: 532 - All working as should, surplus to requirements - Loading available

Good tyres, holding air, 460/85R34, approx 80% tread - Electric box for bed chain - New floor drive gearbox 4 years ago - Lights & brakes present & working - Wide angle PTO shaft - C/w slurry door - C/w sprung draw bar - Weld on patch on tub - In working clothes, been used recently - Selling due to upgrade - Serial Number: 710693

C/w PTO - Used by us on our farm last two years until we bought a flail machine - Been sand blasted by us - Had new steel plate welded in - Been resprayed to a reasonable standard - Ready to go to work for a good few years - Loading available

Digger mounted - Serial Number: 12256 - 120kg hammer (added extra when new) gripper plate - Extending leg - 30mm pins - 110mm pin centres - 105mm jaw width - Only used for once on small holding & not needed again - Good condition

Land drive - C/w marker discs - Hoppers appear in good condition - Working when last used spring 2025 - 3 point linkage or 'A' frame mounted - Adjustable row spacings - 10' wide

9' working width - C/w PTO (needs guard) - Bed solid - C/w 2 rear wheels - Skids damaged slightly - Working order

Serial No: 047968 - Brakes working - Lights believed to be working but unable to test - C/w PTO shaft - Good condition - No holes in barrel - Selling due to retirement

All working - 3pnt linkage mounted - Strong - Spool lever operated

C/w PTO shaft - No corrosion - Lights present - L20 Line plus

C/w topper - Hydraulic folding - C/w packer rollers - C/w scraper bars - Strong, well built

6F reversible - Hydraulic vari-width - Pipes all present - Some worn metal

1.1 metre head - Used 6 weeks ago- - Working order - Please note top link is not included

Ready to work

Good flails - Front or rear mounted - Roller, 2.2m wide - Hydraulic side shift - Good working order - Used recently - Selling due to upgrade

Owned since new - Good flails - Rear roller, 2.7m wide - 540 drive - PTO missing cover - Good working order - Recently used - Selling due to upgrade

24m tramlines - Ferrag spring tines & packer roller - C/w electric control box & manuals - Extended hopper - No PTO shaft - Working order when last used - Approx year 1995

In good condition

Slightly bend draw in bar but not structurally damaged and doesn't affect functionality - In good condition

Used for dirty water - Return & away pipe work - Slight oil leak on priming pump motor

Spares or Repairs - SN: 2122412 - C/w PTO shaft - Lights untested - Brakes working - Needs patching - Bought with the intention of patching holes & repairs to slurry door but since purchased another spreader. - Good chains and slats floor looks good - Two tyres brakes work well

C/w fine chop - Serial No: 85229- - Trailed linkage - Swivel shute - Lights working - Tyres very good condition - 1 owner from new - Very tidy machine - Fitted with fine chop, retractable knives and retractable sieve

Serial No: 1072 - Trailed linkage - Swivel shute - Lights untested - Working order

Owned from new

3.1m wide - 1.4m leg spacing - Simba legs & metal - Hydraulic legs - Solid framework

One owner from new - Good working order - Reconditioned control box - New floor motor

3 point linkage mounted with self load - Spool control - Good condition - Only been used on saw dust - Could be mounted on loader or skid steer - Always been stored in the dry - Only for sale as the last of the cubicles have been taken out

Only bought this year ON FARM - Working order - Used this year (cut 60 acres) - C/w PTO

Single blade - Very little work - As new condition

Good metal work all round - Classic cutters - Eradication tines - Marker arms - New fan bearing fitted last year - Lights in good condition - Packed away last year ready to go to work, opportunity arose to upgrade after using for 6 seasons - Maize drill set at 75cm spaces and can be adjusted to suit

Serial No: 814071 - Good working order - This lot is part of an ongoing dispersal. The vendor has sold the milking cows and relinquishing the tenancy

Dual spreader - C/w PTO - C/w greedy boards - 1 tyre bigger than the other but holding air - Working - Brakes and lights present untested - Hydraulic door open

2.8m - GF2018C - Believed to be 2010 - Last year had all new sponges and has not been used since - One pass direct drill - Will plant all sizes of seed - Land drive - C/w a few spares

9' working width - C/w filling bungs - Rollers are currently empty - Tyre condition approx 90% tread - Loading available - Fold up for roads

Single phase (230 volt) - C/w control box - Bought new in 2023 and very little use - Good working order - Vendor will get generator disconnected electrically, buyer to remove

System disc - Pre emergence markers - Following harrows - Hopper extension

Very tidy condition - Galvanised frame - Solid, straight, tidy order

Solid skids - C/w PTO shaft - Very tidy condition for age, had limited use - Working order

Solid metalwork - Crumbler rollers all solid - Front levelling bar - All tines present

Spool lever controls (10 functions) - C/w racks spike (hydraulic) - Left/right hydraulic adjustment - Forward/back tilt adjustment - Hydraulic legs - Good rope - All pipes present (some perishing) - Strong, well built post banger

Incorrect model stickers on baler - Flotation tyres with good tread - Rota-feed - 62,789 bales on clock - 2.3m pick up - Slight damage on inspection ladder - Lights to rear - PTO shaft needs replacement cover before use - C/W control box - 1 knotter sensor can be temperamental

New PTO guard -3003 hours - Sideboards - Bed has had new bearing seals and grease ready to go to work

Serial No: 00MA36236 - Good wearing metal, nearly new points and wings - 4+1 configuration, DD bodies, pin adjust skimmers, manual vari-width with hydraulic front furrow and depth/transport wheel

1.2m head working width - 5.5m maximum reach - 3 point linkage - C/w PTO shaft - Lights working - Serial No: M143567 - Electric joy stick - Owned from new - In used condition - Loading available by appointment

Tidy well looked after topper - Washed and barn stored - 2.8m working width - C/w PTO - Loading available

6.6M telescopic reach - 1.3m head - Low pressure joystick controls - C/w PTO shaft - 3 point linkage - Lights working - Double sided flails - Oil filter has been replaced not that long ago - Oil leak on the head rotor - Oil leak on the bottom of the oil cooler - All pipes are in good condition - Loading available if required.

Some surface rust - 5 chains are missing their end flail/lug - Good working order - Tidy for age - Not had a lot of work in the last three years - C/w PTO shaft - No control box - Good tread on tyres - No holes in the barrel - Bearings all good - All greased and ready to go.

2012 AMAZONE ZA-M 3600 ULTRA HYDRO SPREADER 3.6T capacity - Disc spreader - C/w hydraulic shut off - C/w control box

2001 Lemken Semi Mounted Vari Diamant 7 Furrow Reversible Plough - Manual vari-width - Serial No. 5/1/1 L100 246 171

Hydraulic tramline markers - Vector discs (2 rows) - Trailing tines - SN: 27655 - Rubber covered trailing roller

8' swing around - In good working order - With full shaft.

Serial number: 11492 - 11000L pump - Sprung drawbar - 800/65 R32 tyres - LED lights - Lights and brakes present and working - PTO shaft

3 metre AD-P303 special combination drill - Electric metering - Electric calibration kit - C/w levelling board, Rubber packer, single disc, following harrow - Good tines with plenty life left on them - Used last year in November - Only selling due to upgrade

Used condition - Works perfectly - Had a couple new seals last year and new tines - Only done 60 acres since - Serial No: 1234 - Packer roller - PTO shaft - Loading available

SN: ED85-200-8HD - Manual Vari-width - Missing disc on the last furrow - C/w box of spares

Has been heavily modified and can pull through tough conditions, can fit up to 32mm water pipe - Welded solid so no shear bolt to worry about - Selling due to change in circumstances

Very heavy duty - C/W PTO shaft - Previous repair to hydraulic ram as pictured - 1.8m working width

Lights present - C/w cover - 0.9 m3 capacity

Combination unit - 9/400 K-DS drill - Lemken Zirkon 10/400 power harrow - Hydraulic folding - C/w full set of new power harrow tines - C/w control box - Current owner has owned since 2019 (2 owners from new) - C/w packer roller, disc coulters & trailing tines

Hydraulic folding - 2.5m transport width - Can be fitted to slurry tanker (2000G+) or umbilical system - Tidy order - Enquiries & viewings welcome