Spares or Repairs - For MF30 Drill - Home made year 2000 - 4.77 metres length - Floor is made from 100mm square box iron - Tyres perished but holding air - Needs another axle spare provided with trailer - Would make a good project as box section is in good condition

Serial Number: DT9367 - Lights present and working - Brake type air over oil, working - Hydraulic tailgate - 2 tipping rams - Floor condition strong with dents - Tyres in good condition, 1 recently new - Running gear has been gone through earlier in 2025 - New leaf spring fitted

To carry 2 17.2hh horses - C/W living, bunk beds, cooker, sink, storage, tack locker, rug rack - Spare tyre - New tow hitch and jockey wheel has been fitted in the last 12 months - Recently serviced - Aluminium floor - In regular use

16T carrying capacity - Lights present and working - Oil brakes, all working - Strap tie downs and strap box - Tandem axle - Metal chequer plate floor - New electrical lead to be included in sale - Painted in John Deere green

3 decks - Hydraulic ramp to second and third deck - Trailer not included, livestock container only.

Lights present and working - Brakes untested - Handbrake works - C/w spare wheel - C/w jockey wheel - Wooden floor - 4 new tyres - Tool box & wood holders brackets and wood not included in the sale of the trailer

C/w sheep decks

Petrol primer - Fully remote control - C/w control box - 3270Hrs - Was running in summer when last used

Spares or repairs - Needs to be repaired - 4' x 5.5' frame - Needs some repairs to the axle

Spares or Repairs - Twin axle - Tyres holding air - Timber needs attention - No brakes or lights

Galvanised - Owned from new - As new tyres - Fully working with recent refurbished control box - Tarpaulin cover - All wiring - Instruction manuals

Lights present but untested - Brakes working - C/w jockey wheel - C/w spare wheel - Tyres in good condition - Generally in good condition, Chequer plate floor - Being sold as no longer keeping livestock

Serial number: SCK40000055014875 - Lights present & working - Hand brake working - C/w spare wheel - Brakes working - C/w jockey wheel - C/w central partition - C/w 2 breast bars - Flooring aluminium with rubber - Tyres have good tread - Damage to bottom of side loading door but still useable - Tows well

Handbrake working - Lights present and working - Brakes working - Good floor - Tyres in good condition - Box trailer complete with diesel fuel cleaning/polishing system

Serial Number: 2755714 - 14T - Lights present & working - Brakes working, full commercial axles & brakes - Hydraulic tailgate & sprung drawbar - 2 tipping rams - New floor - Tyres all new - Trailer has never been used - C/w grain shute, mud guards & flaps

Takes 4.5T digger - Manual front ramps - Tyres have good tread, holding air but perished - 5MM box beams - Timber floor rotted in some places - Brakes and lights working (brakes would benefit from service)

Spares or repairs - Demount stock trailer - Lights present but not working - Brakes untested - Handbrake is not working - C/w jockey wheel - No sheep decks or cattle partition gate - Detachable livestock container - Chassis is rusted through in places - Not been used for many years, not roadworthy

Single axle - Lights are intermittent - Wooden boarded floor (needs renewing) - Jockey wheel is broken - C/w spare wheel - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

IFOR WILLIAMS 10' TWIN AXLE LIVESTOCK TRAILER - No sheep decks - Brakes and lights work - Working order - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

Approx 7' wide - Wooden floor - C/w front and rear lades - No brakes or lights - 7.50 - 16 tyres - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

Hydraulics work (tipping locks) - 10 x 6' - 10.5/65-16 tyres - Some rust damage on trailer floor and around sides - C/w trailer stand - C/w rear tail gate winch is very bent

C/w spare flat wheel - Wooden floor - Tyres in good condition approx 3mm - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

Wooden boarded floor and sides - Some of the wood needs attention - Metal frame in good condition

Galvanised - Good condition - Used to move cattle showing equipment - 90cm x 60cm - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Bought new & never used - Trailer is 135cm x 85cm wide x 45cm deep - Good floor - C/w removable back - Please note flat tyre will be mended before end of sale - Please note this lot is part of a genuine phased dispersal the vendor is selling the farm. There will be a collection day on Friday 12th December between 10.00AM to 4.00PM.

Lights present but untested - Brakes untested - Wooden floor - Tyres in useable condition

Type: BV105G - Lights and brakes work - C/w spare tyre - C/w roller shute - Boarded floor - Good tyres

Tyres show age but hold air - Tips up fine - Recently has had a set of hydraulic hoses - Loading available

10' long x 6' wide - All lights present and working - Rhino board floor - C/w spare tyre with good tread - 1 owner from new - New type plug - C/w jockey wheel - 4 tyres with varying tread

45' long/13.6m long - Test unit end of November - In use in recent weeks, any viewing - 2 axles relined in the last 12 month - All tyres have tread - C349305 - Can be delivered by vendor by separate negotiation within 50 miles - Dry internally - EXNL 12-64-2 curtains - Viewing welcome

Twin deck - Electric Lift ramp - Chequer plate floor - Bale trailer not included - 3 sections on each deck - Metal parting gates with aluminium dividers - Same owner for last 3 years but sale due to upgrade - C/w legs/stand - New electric motor 3 years ago - C/w electric lead for battery - 3 side access gates - C/w 1 cattle partition gate - Viewing welcome

Trailer bed is approx 16' x 8' - Not used in the last 2 years but worked when last operated - C/w atlas crane & good grab - Tyres good and hold air - Contents not included

Lights present - No brakes - Twin dual wheels

C/w heating system, kitchen, fridge, seats, spare wheel, keys - Lights present - Brakes work - Twin axle - please note photos were taken several months ago and trailer has been stored since.

C/w winch, ramps - Good tread on tyres - Lights and brakes present but could do with a service as been parked in shed unused for a couple of years - Bed is approx 11' long

Alloy container - Chequered plate floor (good) - Sprung draw bar - Low profile tyres 400/60.15.5 & 3 tyres are good but 4th not so good - Partition gate - Removable top - C/w front and back lades

6'8'' x 4'3'' (200cm x 130cm) - C/w spare wheel - Chequer plate removable top (custom made) - Boarded floor - Lights work - Mesh sides

DP120G - Serial number: 14767 - Lights present and working - Brakes not working - Spare tyre - Jockey wheel - Cattle partition gate - Detachable livestock container - Good tyres and wheel rims - Some rust on roof

Twin axle - C/w sheep decks - Chequer plate floor - C/w cattle/sheep partition door - Some rust - Tyres have good tread and holding air - Breaks & lights working - Aluminium gates

REMOVED AS UNABLE TO PROVIDE PHOTOS - C/w spare wheel & tyre - Jockey wheel present - C/w 2 partition gates - Lights present - 1 mudguard slightly damaged - 4 good tyres - Recent handbrake handle replacement - Full galvanised - Purchased during covid

REMOVED AS DUPLICATE LOT - PLEASE SEE LOT 2548 - Euro 8 brackets - Bent on top but no holes in bucket

JCB bolt on brackets not included - C/w pallet fork slots - Sprung gate & latch - Fully galvanised, with built in tool tray - Extension bars on front for holding materials

Heavy Duty galvanised - 2.5m wide grading beam - Complete with heavy duty cutting edge and rear roller - Bracket for bolt on laser pole, pole not included - Bolt on power tilt head stock not included, ready to bolt on, any size digger head stock

On Chiltern brackets - 5' wide - Hydraulic ram good - Some new tines - Working order

360kg capacity

C/w Euro 8 brackets - Missing 1 end tine and 5 front tines - Double ram - Working order

Original Implements top grip over the top bale handler - Bought brand new 2 years ago and has only been used for one season in which it did 30 bales (so as new condition) - C/w Euro 8 brackets - C/w manual

Manual tipping - Solid sides - Floor needs renewing

1.3m wide x 85cm - Floor solid, heavy

Triple spikes (2 large and 1 small) - 3 point linkage - Being sold for a deceased estate

Believed to be approx 25kg each - Removed from a Massey Ferguson 365, when sold

Dual tine - Solid frame - Can be used on loader or 3 point linkage - John Deere style brackets

No weight bars

Hydraulic door - C/w bolt on LM/New Holland brackets - Very little use - Paintwork imaculate - C/w 4 lugs that tote bags fit on or sleeves - Shop soiled - Hardox/Strenx steel - C/w manual

Brand new and unused - Serial number 7559 - Strong design - PTO included

15' Hydraulic powered slurry stirrer - Serial number 7599 - Fork mounted - Large impeller - Strong design - Ex demo - No pipes included in sale

Full set of 10 - No damage - Believed to be 25kg

New - Adjustable opening width

Good working order with brand new Euro 8 brackets - Came off a tractor no longer needed works fine - Good ram

MF180 Bracket type - Rubbing on hydraulic hose but not leaking - Good working order

For loader or 3 point linkage - Straight pin - Single spike plus a short stability spike - Loader connection 105cm wide - Rusty

Little use - 45MM pins - 233 pin centres - 152MM dipper gap width - To fit TB250 or similar

Floor condition unknown but holding stone - Removable rear - 1m wide

In good working order - Well made and solid - Has brand new Euro 8 brackets - Pipes have some perishing but where holding pressure last time used

Circa 1950's - 1 tine missing - Mostly solid

For moving Trailers with clevis & 45mm pin - As new condition

For moving Trailers 50mm ball - As new condition

Manitou brackets - Tines & blades in good condition - No rust on rams

3 tines

Spares or repairs - Damage to oil line connectors

No engine

Spares or repairs only - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

3 point linkage - 2 spike - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

C/w Tanco brackets - Hydraulic pipes are perished - Vendor bought 10 years ago but never used - Twin ram - Will need some attention - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

Working order but does have some rust damage and needs some welding - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

C/w 3PNT linkage - Approx 3' 10'' wide x 3' 2'' high x 18'' wide - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

4 same shape but all same fittings - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

All the same - Fit Zetor tractor - Never been used - Please note that this lot is part of a phased dispersal. The vendor is relinquishing his farm tenancy

Euro brackets - Missing some tines

Unknown brand - Euro 8 bracket type - Never had brackets welded onto the spike - C/w Euro 8 brackets ready for welding

Mesh door - Tipping - Timber floor

Was a muck grab converted to square bales - Not used for 10 years so will need attention to get working - C/w Euro 3 bracket

C/w Euro 8 headstock - Last used 1 year ago - C/w 3rd service - C/w brackets and controls from the tractor

Euro 8 brackets - 6 tines (all straight) - Last used 8 years ago (bought new on farm) - Twin ram - Believed working order

Euro 8 brackets - Stacks bales on their end - Not used for 10 years but believed working order

58'' wide - Euro 8 brackets - All tines present and straight - Last used over 10 years ago - May need attention to get going

Euro 8 brackets - Bent on top but no holes in bucket

11'' long - Serial No: 100880 - Working order (not used for a number of years) - This lot is being sold as part of a phased dispersal, the vendor having relinquished his farm tenancy

All bars - C/w Euro 8 brackets - Forks are 4' long - This lot is being sold as part of a phased dispersal, the vendor having relinquished his farm tenancy

Spares or repairs - C/w Euro 8 brackets - Not used for 10 years so being sold as spares or repairs - This lot is being sold as part of a phased dispersal, the vendor having relinquished his farm tenancy

3 Kubota 24kg front weights - Pair of loader mounting brackets

1 year old

One of the outside tines is bent up

Euro brackets