One trip (like new) - Manufactured 2025 - Green - Loading available - Transport can be arranged at additional cost to buyer

One trip (like new) - Manufactured 2025 - Green - Loading available - Transport can be arranged at additional cost to buyer

One trip (like new) - Manufactured 2025 - Green - Loading available - Transport can be arranged at additional cost to buyer

One trip (like new) - Manufactured 2025 - Green - Loading available - Transport can be arranged at additional cost to buyer

One trip (like new) - Manufactured 2024 - Blue - Loading available - Transport can be arranged at additional cost to buyer

One trip (like new) - Manufactured 2024 - Blue - Loading available - Transport can be arranged at additional cost to buyer

Roof sound - Hole in floor - Couple of areas need attention - Cream - Loading available - Transport can be arranged at additional cost to buyer

Has been used as a canteen with sink unit & plumbing - Fitted electric heaters, lights & sockets (untested) - Plumbed in sink with hot water heater - 4 windows with shutters - Side door - Water tight - Cream - Loading available - Transport can be arranged at additional cost to buyer

C/w electric lights & sockets (untested) - 2 shelves down one side - Floor good - Small hole in roof - Cream - Loading available - Transport can be arranged at additional cost to buyer

Floor good - Lockable door - Some rust but useable - Loading available - Transport can be arranged at additional cost to buyer

Roof has been patched - May need some attention - Blue - Loading available - Transport can be arranged at additional cost to buyer

Must go on a vehicle registered September 2021 or newer

Serial Number: 55960000028 - C/w Control box - Machine is in good working order - Been used for the past two seasons with no trouble - New knives fitted last season - Additive system included

C/w PTO shaft - Lights and brakes working - Wide angle PTO shaft - Slurry door - Side extensions - Extra high rotors

3 metre - Amazone KX3000 power harrow - ISOBUS - Disc coulters - Pre emerge markers - Used recently - All up together and good working order

Serial No: 1783 - 3000 ltr capacity - Disc spinner - Hydraulic shut off - Control box

2015 model with 2016 1.4m head flails, 50% used this year - Vendor is only selling due to an upgrade

Currently on 24m discs and also comes with S2 18m discs - Hydraulic shut off - Section control/border control - Headland land kit - C/W PTO - 3T hopper - Adjustable rates - Odd small patches of surface rust/flaking paint - C/W cover - C/W manual and distribution guide - Lights working - Very tidy - Oiled and barn stored after every use - Viewing welcome

New wiring loom on control panel - Same owner since 2021 - Operational

Serial number: 8106101807 - Mounted linkage type - Lights untested - Cable control - Good working order - Done one winter since serviced - Purchased from Halse SW 2023, fully serviced

Serial number: 230913 - Clean and tidy, done little work - Ideal for topping small paddocks behind an ATV etc - Vendor is only selling as doesnt use anymore - Vendor is happy to deliver locally in South Devon, can be shipped throughout the UK on a pallet

Lights to rear - 2000 gallon capacity - Rear splash plate - Tyres holding air with very good tread - 4'' slurry pipe pictured is not included and will be replaced with 6'' pipe - C/W PTO shaft

Very heavy duty - C/W PTO shaft - Previous repair to hydraulic ram as pictured - 1.8m working width

Last NSTS test in 2022 - 12m boom width - Hydraulic folding galvanised booms - Some previous repairs to booms - C/w PTO shaft - Last used in early 2025

Ball and spoon hitch - 4 tyres with reasonable tread - C/w splash plate - Chequer plate strap box - Air brakes, road spec axles - Rear lights present but untested - Working order - Believed approx 2010 but plate worn - Used in recent months

Working when last used - C/W PTO shaft - Some tines need replacing and will need some general TLC - Now surplus to requirements

2004 FORCE BERTHOUD 18M 1000L MOUNTED SPRAYER - Working when last tested in 2024 however wasn't certificated - No test certificate - 18m booms - Some paint flaking/corrosion - Now surplus to requirements - Viewing welcome

Incorrect model stickers on baler - Flotation tyres with good tread - Rota-feed - 62,789 bales on clock - 2.3m pick up - Slight damage on inspection ladder - Lights to rear - PTO shaft needs replacement cover before use - C/W control box - 1 knotter sensor can be temperamental

1 owner from new - Only covered small number of acres - Very tidy all around - C/w PTO shaft - Sale due to upgrade, any inspection welcome

Not used in 2025, only used in 2024 - Very tidy all around, dusty from stored - C/w PTO shaft and A frame - Side Lights - Sale due to upgrade - Sale due to upgrade, any inspection welcome

1 owner from new - All tines present - Very tidy - C/w PTO shaft - Lights and defectors correct and present - Sale due to upgrade, any inspection welcome

1 owner from new - All arms/tines correct - Tyres holding air with good tread - Lights and rear defectors present and correct - C/w PTO shaft - 4 tyres per rotor - Sale due to upgrade, any inspection welcome

Hydraulic folding - Model: VPB-25-500 P - C/w PTO shaft - C/w packer roller - Tidy for age - All tines appear present - No leaks - Heavy duty and well made - Dry stored - Sale due to upgrade, any inspection welcome

16hp twin cylinder Briggs and Stratton petrol engine - 4' cut - Has had little use - Barn stored - Good flails and tyres - Adjustable offsett drawbar

Serial Number: CC0580X327851 - Bale count: 25,976 - C/w PTO

Approx 8 years old - Hydraulic folding - Crumbler rollers with hydraulic adjustment

4M wide working width - Hydraulic fold - Good duckbill tines - Tyres good and holding air - Adjustable depth wheels - Tidy machine

1.1 metre head - Used 6 weeks ago - Working order - Please note top link is not included

Working - 1.3m head approx - Semi independent - Spool lever controls - Year unknown

C/w PTO shaft (needs new guard before use) - Bale count 19,638 - 1 owner from new - Crop cutter BB9060 - Flotation tyres with good tread - Lights present - Hydraulic - Isobus - Rear steering axle - 1.98m pick up - Done about 1000 bales in 2025 and being sold as surplus to requirements

Baled 1600 bales in 2024 - Owned for 3 years.

Used this year - Comes with some net - Autoform controller - Auto-lube system - Well looked after.

Hydraulic lid - Good set of 550/60-22.5 BKT flotation wheels & tyres - Hydraulic brakes (working) - LED lights (working) - Full set of chains have just been shortened - Solid drum - All runs/works well - Used up until October - Selling as purchased small rear discharge machine - Serial No. K23655

2008 KUHN MULTI MASTER 122 5 FURROW PLOUGH - shearbolt - Bracket for extra furrow - Mouldboards worn & most points need turning/replacing - Hydraulic front furrow adjustment - Some surface rust to rams - Land wheel solid - Hydraulic pipes in good condition - No cracks, bends or welds on beam

Cable controls freely moving - No PTO - 4' head - Flails in reasonable condition - Some light rust on rams

Electric controls - New flails 4 years ago which have not been turned over - Used recently and in working order - PTO present but missing guard

Mouldboards worn - No cracks, bends or welds to beam - Land wheel holding air - Some good metal left on points - Hydraulic pipes mostly in good condition

24 metre - 4 nozzle holders - Top con guidance system - Auto shut off and section control - 3200 litre tank - Steering drawbar - Last used spring 2025 and working order when put away - Please note there is some welding on the body - Not in NSTS test

3 point linkage - C/w 10'' PTO - Max. diameter wood 250 mm - Capacity (approx.) 7-30 m3/h 3 - Chipper type Disc Infeed (W x H) 260 x 260 mm Infeed 45 degree feeding angle - Cutting disc diameter 94 cm - Cutting disc weight 172 kg - Number of knives 4 – stepless knife adjustment Knife adjustment 3-20 mm - Power requirement 1 20-90 kW Revolutions (r/min) 540 – 1000 rpm - Weight 530 – 1160 kg - Made in Finland

In good condition

2012 AMAZONE ZAM3600 HYDRO ULTRA PROFI FERTILISER SPREADER - C/w Control box - In good working order - C/W Amatron 3 controller

Liquid manure spreader - Serial Number: 127871884 - C/w PTO - In good condition - New Mech 2000 pump fitted in 2018.

2001 LEMKEN SEMI MOUNTED VARI DIAMANT 7 FURROW REVERSIBLE PLOUGH - Semi mounted - On shear bolts - Cat 3 headstock - 500/60 R15.5 singular idle/transport wheel with about 50% tread left.

11000 Ltr - Pump - 800 tyres - Suction hose

Serial Number: 151047 - C/w control box - Wrap size 750mm - Will wrap any size square or round bale - Vendor has wrapped mostly 120 x 70 this yea as well as some 80 x 90 and 4' rounds - Takes 2 750mm rolls of wrap

Spare or Repairs - 3000 capacity - Top fill - Lights & brakes untested - Bought as a project but haven’t had time to complete solid tank, comes with pump, gate valve/ splash plate, rear door, float balls (pictured) tyres are very good new in 2021 and haven’t done much since.

Serial Number: 31375 - Lights untested - C/w Swivel shute - C/w electric control box - Bluetooth controls - Shaft included but has a slight bend and needs new guard

Spares or Repairs - Serial Number: 5098 - Lights untested - Trailed - C/w Swivel shute - C/w electric control box - Selling as spares or repairs as needs new bed slat & few little bits doing, but solid machine

Previously rebuilt - Dry stored - Working order

Single blade - Very little work - As new condition

12M boom length - 1000 tank capacity - SNTS certificate until 30.01.2026 - Loading available - Induction hooper - Clean water tank - Good working order

Lights do not work - PTO shaft needs new guard - Brakes untested - Spreader is in working order but has done a lot of work and is a bit untidy and rusty

Rear discharge - All in working order - Used this summer

Been used regularly this year - Only selling due to upgrade

Spare or Repairs - C/w PTO shaft - Working electrics for weigh display - Blades present - Tyres in good condition - Needs a reline, hydraulic brake pipe and unloading chute - All turns over as it should, brakes will work with new hydraulic pipe, will require a new feed out chute and reline, display box turns on, pto needs attention

Serial number: 12573 - Blades and PTO in good order - Slip clutch - Metal is all solid - Has been used this year - Loading available

Serial Number: S1020190033 - Cutting width 1.55m - Full working order - Adjustable cutting height - Recent gearbox oil change - New PTO shaft fitted - Belts are all in good condition - Hammer flails

C/w AD-P 303 special disc drill - Standard tines approx 40% - 3m working width - C/w packer roller - Good working order, used this autumn

System disc - Pre emergence markers - Following harrows - Hopper extension

Electric controls - Hydraulic slew - Upgraded lift ram - Working when put away 3 years ago - 4' head - C/w PTO - Flails would benefit from a change - No rust on rams

Owned from new - Hydraulic axle - All tyres good and holding air - 4 rotor rake - Electric control box - 12.5m working width - Hydraulic brakes - Lights all working order - All guards present - All good tines - No welds visible

Never been used - Sat in yard from new - 9m working width - Hydraulic valves - Coupling for umbilical cord - Can be tanker mounted - Rubber boots - Bent spring on one valve

Telescopic boom joystick controls - 4' head - 3pnt linkage with linkage stabilizers - Oil cooler - 2004 - Some play in pins and bushes - Recent hydraulic pumps - The trimmer is off the tractor ready for loading - Loading available

Ex demo only - Approx 1.7m head - Telescopic boom - Dry stored - Considerable saving on new - C/w PTO - 3pnt linkage mounted - Can be loaded for purchaser

2.8m cut - Hydraulic side-shift - Trailing roller - Flails - C/w PTO shaft - Very tidy

SN: 782179 - PTO shaft - 10' cutting width - Loading available - Good condition - All works as it should - PTO etc working - Selling due to upgrading - Owned for the last 3/4 years

One tyre slightly perished - One fairly new - Lights present and working - Brakes present and working - PTO guards correct - Some rust and corrosion - Been in use until recently - Replaced with a newer model

2500 gallon galvanised tanker - C/w 4m injectors - C/w macerator in the injector - Please note there is a bend in the PTO and the lights need attention - Brakes work - In working order and used recently - Only being sold as vendor has sold his dairy cows

1.8M pick up width - Good condition - Always dry stored - Ready to go to work - Rear pick up hitch

Fits on power harrow - A frame - C/w markers and following harrow lights and electric box included - Working order - Barn stored

Has been heavily modified and can pull through tough conditions - Welded solid so no shear bolt to worry about - Selling due to change in circumstances

All things present - Working order - Used this year (did 60 acres) - C/w PTO - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

Working order - All tines present - Used this year (did 60 acres) - C/w PTO - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

Only bought this year ON FARM - Working order - Used this year (cut 60 acres) - C/w PTO

C/w swivel grapple - Model No: 215V34 - Bought new in 2017 - C/w control levers - C/w 9HP petrol engine and hydraulic pump - Please note there is a slight hydraulic oil leak from a pipe - 23 x 10.50 - 12 tyres - Currently 2.2M long and can be extended - Please note this is the final dispersal sale, the vendors having sold the farm. All viewings and collections to be done by appointment with the vendor (through the Stags Auctions office), and all purchasers must ensure that all lots are removed from the property by 31st December 2025 at the very latest, as the property is sold.

1.3m head - Lights present - Telescopic boom - 3pnt linkage mounted - Electric controls - Some repairs/paint applied to pipe guards in places - Can be loaded for purchaser

New blades fitted - C/w PTO shaft - Twin chop - Swivel shute - Tyres holding air with tread - No lights

3.1m wide - 1.4m leg spacing - Simba legs & metal - Hydraulic legs - Solid framework

C/w qty of slurry pipe - Being sold separate to shoe (lot 825) - Lights to rear but untested - Hydraulic - SN: BKP26384 - Believed to be 5'' pipe

Model: 12m duo - SN: DUODB26384 - Twin macerator - C/w Krohne flow metre - 12m coverage - Being sold separately to reeler ( lot 824)

Galvanised - C/w PTO shaft - Used recently and working

New rollers in 2021 only doing roughly 200t per year with it, has the spout extension on it main roller bearing done in 2025 been a good machine only for sale as have upgraded. - Loading available

Disc coulters - Tram line kit on fertiliser and seed - End tow kit - About markers - Following harrow - Good pipes

Owned since 2016 - Manual controls - 30' working width - Tones all present & correct - Tyres all holding air - Good working order - Selling due to upgrade

Electric controls - 50' working width - All tines present 7 correct - Tyres holding air, c/w 2 spare - Hydraulic axel - ISOBUS ready - Good working order - Selling due to upgrade

Owned since new - 50' working width - Tines all present - Tyres good holding air - Done very little work - Selling due to upgrade

Cable controls - 3PNt linkage - 1.2M head - Used last season - Needs 1 new cable - C/w operators manual and 2 spreadhead flails

Reversible - 200HP head stock - Sprung legs - Hydraulic front furrow - Turn buckle to do vari width - Plough out to 20'' - Rear disc - Rubber depth wheel - Good order

C/w PTO shaft - 2.8m cutting width - Good working order

Water filled (empty at the moment) - Not used for 8 years - Being sold for a deceased estate