STAINLESS STEEL CALVING AID

Spares and repairs - Weighs in pounds - Mechanism works, but adjuster is seized

20 Spaces - Good order - Slight damage with loader

18 Spaces - Strong feeder

Just been serviced - Good working order - Only have cable for battery, no mains cable

1250KG capacity with moveble creep feeder - Troughs in good condition - Comes with removable legs - Couple small holes as pictured that can be easily patched

Working when last used - Good condition - C/w galvanised stand and spare unused thermostat

7 cups - Bids for the lot

7 are for smaller straws and 2 for larger ones - One or two are are a bit stiff as plungers are a bit bent - Selling as we sold the dairy cows in May, our AI flask is at lot 4012

6 compartments - 20Ltr - C/w measuring stick - Selling as we sold the dairy cows in May, AI guns are being sold at 4011

1 x left hand 1 x right hand - Purchased new on farm in December 2016 and used until end of May 2024 - C/W air drier, 2 vacuum pumps - Galvanised air vessel - Both got OCC cell counters and body condition score condition - On full service contract with dairy centre which ceased trading in 2024 - C/W tempest 400L hot water tank - C/W 2 shedding gates - Stainless steel - no compressors - Viewing and inspection welcome, can be seen working (not milking) - Auger feed system can also be taken - C/W 6500L Roka Bulk tank - C/W Delaval T100 SLA controls - C/W plate cooler and milk filter - C/W heat recovery system - C/W pc and delpro software

C/w 2 single phase compressors (not pictured) - With own cooling system - Vendor will assist loading

8 stalls - In current use (good working order) - Gea/Westalia - ATL feeding - C/w ACRS - C/w own milk pump, vacuum pump and feed auger - Fully portable (pallet form dolly) - Vendor will assist loading - C/w front and rear ramps

Good order - Marked No 4

No lid - Split on the bottom and leaks - Marked No 5

Working when took out 12 months ago - Slight perishing - Most metal work solid

C/w bottom taps and top rubbers - Fullwood

C/w bottom outlet - Tripod - Solid

2011 - 6.9L - Working when removed - C/w electric tap

Twenty point milking pulsation system - To include power units and pulsation blocks - Regularly serviced by Venture Dairy - Stopped milking so no longer needed - In good working condition.

Only 4 years old - Total length is approx 400' and please note some are damaged (300' are definitely usable) - Pre-cast concrete

All fixings are included - In doubles & singles

Less than 10 years old - Removed ready for collection - C/w Clamps to the rails but no rails or neck rail clamps / brisket board brackets as these are being retained - Can be loaded

Less than 10 years old - Removed ready for collection - C/w Clamps to the rails but no rails or neck rail clamps / brisket board brackets as these are being retained - Can be loaded

Less than 10 years old - Removed ready for collection - C/w Clamps to the rails but no rails or neck rail clamps / brisket board brackets as these are being retained - Can be loaded

Less than 10 years old - Removed ready for collection - Can be loaded by machine on pallets

Less than 10 years old - Mixed 20mm & 25mm thick ​​​​​​​- Removed ready for collection - Can be loaded by machine on pallets

Less than 10 years old - Mixed 20mm & 25mm thick ​​​​​​​- Removed ready for collection - Can be loaded by machine on pallets

1 owner from new - approx 10 years old - Adjustable shafts and seat - Suspension - Good tyres - 2 seater version - Good condition - Barn stored

Approx 10 years old - Good condition - To suit approx 10-12.2 hands pony - C/W bridle, liverpool bit and harness

Approx 10 years old - Good condition - To suit approx 12-14.2 hands pony - C/W bridle, liverpool bit and harness

Has been dismantled and is ready for collection - All working as should be when last used

Brookridge timber - New roof sheets - Buyer to dismantle and take away

C/w 4 metal cups - Very good condition - Barn stored - 5' high

7 x livestock drinking bowls - In good condition - One missing ball valve kit

6 x 10ft panels with doors - 6 x 8ft side panel - Treated timber

2300 x 1700 x 1020

To inc: Lead rope, long strip lead - Hay net - Dung scoop rake

Auto turn cradle - Approx 15-20 egg capacity - Working - C/w heat lamp - Marked No 47

Weighted - C/w valves and pipe - Working when last used

C/w harnesses to fit 12H x 14H - 1 tyre soft (both perishing) - Would clean up easily - Marked number 19

5'9''/175cm - Back seam 130cm

Came out of shed, will make 8 stables in a shed - Stables are 7' high - Partitions are 11', 12' and 14' long with bars and upright boards - Partitions are showing rust, some are rusted on bottom - Partitions came out out of a livery shed in 2005, always dry stored - Wooden boards and doors photographed to side are part of the partitions - Partitions bolt together (no bolts included), they are heavy, well made and straight

All 4' high

1 leather head collar

4 large - 1 medium

Life left - Stored in tack room - All straps etc in good order

17'' - Slight damage to seat otherwise like new

17.5'' - Used but in good condition - Complete new reflock

5/8th with reins used twice

Approx 12 - Not used recently but stored after being used

C/w all trays, divides etc - Good working order

C/w all trays, dividers etc - Good working order

Includes full length electric conveyor to move eggs to collection point at one end - Also comes with control system to operate mesh guards to close off all boxes to prevent roosting - All matting sections present and useable, but condition vary - Suitable for 4000 free range hens - Second, identical system also listed - Dismantled and ready to collect

Includes full length electric conveyor to move eggs to collection point at one end - Also comes with control system to operate mesh guards to close off all boxes to prevent roosting - All matting sections present and useable, but condition vary - Suitable for 4000 free range hens - Second, identical system also listed - Dismantled and ready to collect

600 x 1000mm - Holes are 22 x 36mm - Sit on 5mm wide steel supports (not supplied) - Dismantled and ready to collect - Ideal for a variety of uses, including stabilizing gateways, etc

600 x 1000mm - Holes are 22 x 36mm - Sit on 5mm wide steel supports (not supplied) - Dismantled and ready to collect - Ideal for a variety of uses, including stabilizing gateways, etc

Bowls have lost their galvanising, but still usable - Some might be a bit misshapen on the hopper but still usable

Bowls have lost their galvanising, but still usable - Some might be a bit misshapen on the hopper but still usable

Bowls have lost their galvanising, but still usable - Some might be a bit misshapen on the hopper but still usable

Will fit one full traditional square bale - C/W a steam unit that connects to the bin to steam the hay before feeding - Used but good condition - The steamer unit works, but hasn't been tested on the steamer, however it connects securely

Two Tiered Wooden Hutch - Solid Wood - Felt Roof - Damage to right hand top door but can easily be covered / repaired - Suitable for 2-4 small mammals living in top and bottom separate hutches.

In good working condition - 2 rubber walls, electric pushers, speed control, two directional

With rear and sliding side windows - Has mesh on the side windows

Fully rebuilt with new veins etc, last year and done little work since - 540rpm - 1.5bar - 11,000 L/min - Hydraulic change over - Can be sent on a pallet for £80 as an additional fee

Wrong size for what vendor needed

20'' - New, never used

Good condition - Bidding for the lot

TA5G BACK RAIL FOR IFOR WILLIAMS CATTLE TRAILER

Red gearbox is believed to be from a post hole borer with a spline diameter of 3/4'' - Silver gearbox is 4 speed transmission with a spline diameter of 5/8''

Came off a post driver, was functioning when last used

This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Come off a 6320 but would fit some other models

Took of quad as not needed - It just bolts on to rack

Will replace screw drop link - Needs hoses & couplers - Takes 20mm diameter pins - Closed/open length, pin to pin 60-85cm

Luggage pack & bag

Working seat belt

Seat belt working - Please see photos

Complete but in bits - Has No.1 cylinder piston issue

C/w Integral seat belts - 2 double bench seats all with integral 3 point seat belts - Suitable for most makes and models

1m approx - C/w guard - Marked No 12

1 appears reversible - Believed to be Ferguson but not certain

Hole to hole is 6CM - 25 are left and 25 are right

47'' long - 29'' between fixing holes - Some corrosion but solid