Needs battery

1 x Rutland ESM200 mains fencer - 1 x Hotline P300 plus super hawk - Marked No 13

C/w hangers - Used but in reasonable order - Timber solid - Marked No 20

Damaged one end - C/w hangers - Marked No 21

4' high - Solid, strong gate - No hangers, c/w latch - Marked No 22

Some bends & damage - Damage to top bar only - C/w hangers - Marked No 23

Some bends/damage but would 'do a job' - Both with hangers - Marked No 26

Some bends/damage but would 'do a job' - 3 hangers - Marked No 27

Galvanised - Strong, straight & correct - C/w hangers & latch - Marked No 39

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber appears ok - Marked No 29

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber needs re-fixing - Marked No 30

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber varying condition - Marked No 31

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber varying condition - Marked No 32

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber varying condition - Marked No 33

Strong framework - Corrosion on bottom bar - Will be removed ready for collection - Timber varying condition - Marked No 34

Strong framework - Will be removed ready for collection - Timber needs renewing - Marked No 35

Strong framework - Will be removed ready for collection - Solid timber - Marked No 36

Strong framework - Will be removed ready for collection - Solid timber - Marked No 37

Solid and strong metalwork - Solid trough - In good general condition

Solid and strong metalwork - Solid trough - In good general condition

Unused, barn stored - Very tidy

Unused, barn stored - Very tidy

Good condition - Strong and correct - 5' diameter

Good condition - Strong and correct - 5' diameter

With drainage holes - 98.75'' long x 14.25'' wide x 6.25'' deep

Suitable for blend/nuts - Erected in 2023 - For sale due to purchase of larger bin - Delivery available at cost if required - Tidy bin, viewing welcome

Unused - 12'' x 6''

Some used from roll

2 different makes

Very heavy and strong - Tin sheeting - C/w hangers and latch - Can be loaded - Removed from overhauled building

All straight except one that has top pin brackets damaged (as photographed) - Gates are 6 bars - C/w 2 pins - This lot is being sold as the final part of a dispersal sale

All straight - gates are 6 bars - C/w 1 pin - This lot is being sold as the final part of a dispersal sale

1 is generally straight and 1 is bent - Both have solid floors - This lot is being sold as the final part of a dispersal sale

C/w hangers and small latch - Top bar is rotten - This lot is being sold as the final part of a dispersal sale

5 bar - 3'9'' high - C/w hangers and latch - Straight and good condition - This lot is being sold as the final part of a dispersal sale

5 Bar - 3'9'' high - C/w hangers and latch - All straight - This lot is being sold as the final part of a dispersal sale

5 Bar - 3' 9'' high - C/w hangers and latch - Bottom bar is bent otherwise straight - This lot is being sold as the final part of a dispersal sale

1 square is 4'' x 4'' and 6' 3'' high - 1 round is 4 1/2'' diameter and 6'10'' high - Both painted red - This lot is being sold as the final part of a dispersal sale

Approx 6'2'' long - Old but usable - This lot is being sold as the final part of a dispersal sale

3 point linkage - Slightly bent but usable - This lot is being sold as the final part of a dispersal sale

High tensile approx 3mm diameter - This lot is being sold as the final part of a dispersal sale

Stainless steel milking parlour spares - Longest length of milk line is 3.1 metres long and includes 6 cluster removers - This lot is being sold as the final part of a dispersal sale

Pig tail tops - 42'' high - All used condition - This lot is being sold as the final part of a dispersal sale

Pig tail top - 42'' high - All used condition - This lot is being sold as the final part of a dispersal sale

Feed bin size is 42'' long x 20'' wide x 19'' deep - Solid - Painted green - This lot is being sold as the final part of a dispersal sale

Stainless steel bulk milk tank - No compressor - Last used 10 years ago - C/w clear connecting pipe - This lot is being sold as the final part of a dispersal sale

C/w metalwork supports for the milking parlour - This lot is being sold as the final part of a dispersal sale

This lot is being sold as the final part of a dispersal sale

30'' high x 6'' wide - Model: GC28ZT/26 - Not used for 10 years - This lot is being sold as the final part of a dispersal sale

Last used 18 months ago - Fullwood vacuum pump is type FR3 - Motor is 2.2 kw - This lot is being sold as the final part of a dispersal sale

One is 16'' high and one is 13'' high - This lot is being sold as the final part of a dispersal sale

Includes 2 milk receiver jars, smaller jar, etc - This lot is being sold as the final part of a dispersal sale

Works off 12v battery - Recently tested and working order - 55 litre (15 gallon) tank - 3 metre lance - This lot is being sold as the final part of a dispersal sale

Stainless steel - Last used 12 years ago - C/w compressor (above old milking parlour) - Buyer to remove - This lot is being sold as the final part of a dispersal sale

C/w IAE super neck scoop - C/w weigh bars and Tru Test Ew7l digital display (with blue tooth) - Bought new in 2020 and has had very little use - C/w rear sliding gate - All access - Fully galvanised with chequer plate floor - Weigh bars recently serviced - New weigh cells fitted - Carry a 2 year warranty This lot is being sold as the final part of a dispersal saleThis lot is being sold as the final part of a dispersal sale

To inc: 2 x 10' cattle hurdles, race joiner and rear gate - C/w 6 pins - All straight and correct - This lot is being sold as the final part of a dispersal sale

No holes or cracks - All crooks present except for one

All clips there - No holes or cracks

All crooks there - No holes

C/w lid - C/w rear outlet (handle needs attaching) - Tyres holding air but perished - Ring hitch - Hopper solid

Holds water - No plumbing - Approx 18'' wide

3 UNOPENED 20KG BUCKETS OF MOLE VALLEY MOLE-LYX CATTLE ELITE MINERAL BUCKET -

3 GALVANISED RHS (ROLLED HOLLOW SECTION) METAL BOX SECTION GATE POSTS - Used condition - 5ft long and 4 inches square - 2 have plastic top caps

Four wheels with brakes - Originally an industrial waste bin but has been used as storage of feed - Holds approx 20 x 20kg bags of feed - Loose fit wooden floor fitted into floor recess, can be removed if required

Designed for use with feeder wagons - Solid base framework - Rotating top frame for easy access - Aged but solid timber - Marked number 8

Spares or repairs - Trough needs renewing/repairing - Fixed access bar - 3pnt linkage brackets - Reasonable order apart from trough unit - Marked number 11

Some corrosion in trough but useable and holding water - No lid (can be filled with loader bucket easily if positioned indoors) - 3pnt linkage brackets - Galvanised

Trough solid - 1 wheel bent (mounting bracket damaged) - Lid damaged and needs re-fitting - Marked number 13

Bent - 3' high excluding legs - Marked number 18

Galvanised - Slight variation in condition - For JFC calf hutches - Marked number 21

Galvanised - Slight variation in condition - For JFC calf hutches - Marked number 22

1 teat - All have handles - Marked number 23

No teats - Marked number 24

No holes, cracks - C/w hook over brackets - Marked number 25

C/w valves, no teats - No holes/cracks etc - Marked number 26

C/w 5 valves, no teats - No holes/cracks - Marked number 27

2 way shedding - Very tidy and straight - C/w 3 pins - Marked number 29

Tidy and straight - Marked number 30

Plastic - No lids, for internal use - Marked number 31

Stand base is 9' x 6' - Stand metal work strong - Tank condition unknown (not used recently) - Telehandler on-site to assist - Marked number 38

C/w wooden storage box, gloves, straws etc - Marked number 39

Solid base framework - Slight bend to base on one side - Designed for use with feeder wagon - Rotating top frame for easy access - Missing timber one end - Marked number 40

Solid base framework - Slight bend to base one side - Designed for use with feeder wagon - Rotating top frame for easy access - Timber missing both ends and needs repair one side - Marked number 41

Solid base framework - Designed for use with feeder wagon - Rotating top frame for easy access - Missing timber both ends - Marked number 42

10' high - Solid - Telehandler on site - Marked number 44

C/w weigh dial - Solid wooden floor - Rump bar - Manual yoke (optional side operation) - Full side access spilt into 3 panels - Solid & strong crush - 3pnt linkage transport bracket (slight bends) - Can be loaded with small loader tractor

Good condition

Holds approx 600kg of nuts - C/w lid - Can be loaded - Galvanised

Hold approx 750kg of nuts - Was used for feeding into roller mill - Can be loaded

70G capacity - 315Ltr - No holes

Never used - Creep bar slightly bent - Loop eye ends - Galvanised

Does 5 feeder each side - Believed no cards - Working when taken out 14 years ago