Drop down sides - Loading ramps - Good condition

Good condition - Trailer vision camera - Tack locking

In working order last time used - Comes with all controls although the screen doesn't work - Good solid hopper, no holes - Tows fine with good hitch - Has top sheet with a small hole - Tyres low on tread

Approx 12' 6'' x 6' 6'' - Chequer plate floor - C/w spare wheel - Type: GX126 - Brakes and light work

*PLEASE NOTE VAT STATUS HAS CHANGED TO PLUS VAT FOLLOWING VENDORS INSTRUCTIONS* - Apache 1600 - Good working order, tips fine - On twin axle with flotation tyres, all holding air - Has a drop rear tailgate - Good solid body with no rust - Galvanised chassis, all solid and straight - For sale as sold quad bike

Unknown year and model - Working order

DP120G - Serial number: 14767 - Lights present and working - Brakes not working - Spare tyre - Jockey wheel - Cattle partition gate - Detachable livestock container - Good tyres and wheel rims - Some rust on roof

Recent new floor with tie down eyes fitted - All tyres in good condition (2 new wheels) - Lights working - Good brakes - C/w spare wheel

Has double closing stable doors, corrugated roof, steel easy clean floor and rebar mesh walls with lower wood cladding

10' x 5' 3'' - 3500kg - Spare wheel - Tool box - Good floor, lights and brakes - Has done little work

Tri-axle (tandem) - Model: MAC 278 - Air up and down - C/w ramps - Wooden floor (solid) - Brakes and lights work - INE: Sloping 4' end

Old turntable trailer bought for Shepherds hut base - Approx 12ft x 4ft 6'' - Can load

Lights present - Good for livestock

With posts and chain hooks - Serial number: C224920 - 28 tonne carrying capacity - Lights present and working - Brakes working - Handbrake working - Wooden floor in good condition - Tyres good condition, 5mm-14mm tread across all 6 tyres - Chassis reflects age - Plate until July 2026

Handbrake working - Lights and brakes untested - Excludes cover but includes cover frame - In storage, unused for some time - Circa 50% tread on tyres

2012 STOLL FZ 60.1, 6CYL JD10/20/30 SERIES - Good condition - Just been removed from tractor - Has brackets, SCV block and electric joystick - Will fit 6CYL John Deere 10/20/30 series

Re-sprayed 'John Deere Green' - Good condition - Bolt for putting on John Deere tombstone included - Rear of the weight has been chipped/damaged on both sides as shown in photos

Quicke/Trima brackets - Full headstock width is 4'2'' wide - Forks are 4' long - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

7 tines - Quicke/Trima bracket - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

Quicke/Trima brackets - With front teeth - Some rust damage - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

31'' wide x 21'' x 19'' high - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

Approx 6' wide x 32'' deep - Wooden board in floor - Rear opening with 2 metal gates - Dry stored - 3 point linkage - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Dry stored - Carries 8 conventional bales - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

1m long - 3 point linkage mounted - C/W hook end - This lot is part of the first part dispersal of garden tools and workshop equipment, due to bereavement. All lots have been dry stored and the majority are untested.

C/W vari-tilth (2010) cultivator - 2.8m wide. C/W crumbler roller - All good metal work. Used this season - 3 x new sets of points available at cost price (invoices available)

Legs have been turned around to fit on front linkage - Very heavy duty - good metalwork - C/W depth wheels (new 3 years ago) - Approx 12' overall width

Model no: SM200/600 - Hydraulic - Only used twice - selling due to upgrade to larger model - 6m long. C/W instruction book

Genuine John Deere compact tractor weight box - Approx 60cm wide x 46cm deep x 52cm high - Category 1 pins - iMatch quick hitch compatible

C/w 1.3m PTO (pins need freeing up) - Marked number 7

3 paddles - No PTO shaft - Galvanised mounting frame and shaft - Works but needs new bearing - Marked number 10

Spares or repairs - Believed to be Q-fit brackets - Damaged on both sides and has split as pictured - Marked number 14

Mounting plate 44'' wide - 2 solid spikes - Solid framework - 3pnt linkage brackets also - Marked number 15

1 tine missing - Solid frame - Believed to be Q-fit brackets - Marked number 16

Some corrosion spike mounting hold - 3 pnt linkage/loader bracket fittings - Marked number 17

Spares and repairs - Removed from AG dispenser but should fit other attachments/machines - Well made

Little use - 45MM pins - 233 pin centres - 152MM dipper gap width - To fit TB250 or similar

KV tines - Good condition

Brand new and unused - Serial number 7559 - Strong design - PTO included

15' Hydraulic powered slurry stirrer - Serial number 7599 - Fork mounted - Large impeller - Strong design - Ex demo - No pipes included in sale

Approx 40kg each - C/w pins & bolts

C/w forks

C/w forks

C/w forks 1500mm long

Spares or repairs - Not used for a number of years - 1.7M width

30mm pin diameter - 110mm pin width - 140mm pin centre to pin centre

35mm down to 30mm pins - Mix & match couplers - Removed from a Kubota U27-4 but will be suitable for other 2-3ton excavators

Length of fork approx 3.5ft - Distance between carriages approx 16''

JCB Q fit brackets - 2.7 cubic metre capacity - 8' 6'' wide

JCB Q fit brackets - Bucket has had a recent new edge - C/w 2015 JCB brush (brush has approx 50% bristles)

Recent new hydraulic pipe - Manitou bracket - Used recently

Manitou brackets - 14 tines, all present & straight - Not used for 2 years - Bought new on farm - 3 rams

Believed to be 2020 - 1.9m width - Crack on the right hand side as shown in pictures - Working when last used

Pin & cone weld on brackets - Only used in one season in 2022 to do 8 artic loads of sawdust - Tidy condition

Euro 8 brackets - Solid metal, some corrosion/flaking - Some wear on edge - Marked No 2

2 fixing pins missing - MF S6716 tractor being sold separately in sale - Marked 6

3pnt linkage - Paint flaking - Model M900 - Marked No 38

To fit JCB 3CX digger

With pin and cone brackets - In working order - Used recently but will need welding soon

C/w 2 buckets - Little play in bushes and bearings - Odd rust to rams on digger - Lots of rust on leg rams - Hydraulic swivel seized - Levers stiff - Seat needs attention - C/w hydraulic PTO pump - 3 point linkage mounted

Pin and cone brackets - Small hole in back

Tine is 85CM long & straight

Good teeth - Recently painted - Solid bucket

Hydraulic door - C/w bolt on LM/New Holland brackets - Very little use - Paintwork imaculate - C/w 4 lugs that tote bags fit on or sleeves - Shop soiled - Hardox/Strenx steel - C/w manual

In usable condition with removable tailgate and pins - Steel work thin in places

Can be A-Frame Mounted - Solid

C/w bucket - Hydraulic pipes perished - No cracks, bends or welds - C/w tractor brackets

210cm x 103cm - With metal floor - Missing back gate

Goes on pallet forks - Slatted floor bucket - Used for swede and beet - Bucket holds approx 900kg - Oil pipes perished

Serial Number: CC740AX013456 - Recent new hydraulic pipes - C/W loader brackets - C/W joystick - C/W third service

500mm wide - Came from Takeuchi TB370 2020 machine - Low houred - As new condition - Pin size in photographs

Spares or repairs - Pin and cone bracket type - Needs a bit of welding on headstock and straightening of some tines - Has not been used for a few years

400mm digger bucket - Very good condition - Came from a Takeuchi TB370 2020 year, low houred machine - Pin size in photographs

Approximate measurements can be seen in photographs

3pt linkage - Bottom bracket included, only in one picture

Bracket and 12 x 45kg weights

MF180 Bracket type - Rubbing on hydraulic hose but not leaking - Good working order

For loader or 3 point linkage - Straight pin - Single spike plus a short stability spike - Loader connection 105cm wide - Rusty

Very heavy duty - Surplus to requirements

R series

110KG centre weight

Bit rusty, needs a clean - Tipping link box as pictured

Ram works but leaks - Manitou headstock

Unknown age and brand

On euro brackets - Forks slide freely along rail

Euro brackets - Worked last time it was used but been sat up for a while - Missing one tine

In good order - Pallet forks not included

Spares or repair - C/w attachments - In working order when last used some years ago

3 point linkage - Has some damage on one end but still good solid spike - Ready to go

Good working order with brand new euro 8 brackets - Came off a working tractor - No longer needed - Works fine and has a good ram

Euro 8 brackets - Working order but does need all new tines - As all tines either broken or bent

Pin and cone brackets - Good cutting edge 7' 6'' in good condition

C/w weight carrier - Came off a John Deere 6930 tractor - This lots Photos were changed on 12th October at 11.22am, previous to this incorrect photos were displaying.