1M working width - 3PNT linkage - C/w PTO shaft - SN: 12HD02 - Leaver control - Owned by vendor for the last 5 years, both previous owners are well known to the vendor - Good working order - Vendor has used it within small contracting business for the last 5 years - Vendor fitted a McConnel high reach 1M head last year and it works well and is fully adjustable - The levelling arm has been re enforced and it works perfectly - Being a 40 year sold machine so there is some movement in bushings - Does not have a A frame but its never been a problem - Selling due to vendor upgrading - One photo demonstrates the work it has done at the time fitted with the old head, this head is not included - Pump was working

12M boom length - 1000 tank capacity - SNTS certificate until 30.01.2026 - Loading available - Induction hooper - Clean water tank - Good working order

2015 Marshall MS 105 side discharge FYM spreader - 550 / 60-22-5 Tyres (good tread) - C/w PTO - Bought new on farm - Used this year - All chains present - Well greased - Good working order

2500 gallon galvanised tanker - C/w 4m injectors - C/w macerator in the injector - Please note there is a bend in the PTO and the lights need attention - Brakes work - In working order and used recently - Only being sold as vendor has sold his dairy cows

Bought from Simtech 2 years ago - Selling due to reduction in acreage - Will drill into any conditions, wet or dry - Has a new set of feet and comes with spares, plus a set of spare sponge wheels for the metering system - Good for mixtures of seeds (SFI etc) - Simple drill that can work on a lower horsepower tractor

Good belt and spreading tines - JCB brackets - Loading available -

Combination unit - 9/400 K-DS drill - Lemken Zirkon 10/400 power harrow - Hydraulic folding - C/w full set of power harrow tines - Current owner has owned since 2019 (2 owners from new) - C/w packer roller, disc coulters & trailing tines

Front press wheels - Lights are untested - Control box - Serial number:2807 - Vendor has owned for past 5 years - Was last used in the spring - Loading available

Owned since new - Good tyres 30% tread - 460/85 R38 - Slurry door, rubber present - Used last week - Gearbox reconditioned recently - Lights and brakes present and working - Wide angled PTO, cover present - Paintwork tidy

Hydraulic folding - Good condition - has done very little work - Tines all good - Tyres good, holding air, but some perishing - Some corrosion on metal work

3m wide with one row of tines, most with new points - Second row of pigtail tines - Tyre compactor roller to rear - C/W piggy back frame for fitting drill

Barn stored - Not been used recently - 400l tank - Pump good when last used - Slight bend on booms

Ransomes bodies - SN: 12807 - Winders free and working - Good wearing metal left - No cracks, bends or welds - Cat 1 or 2 pins

3 point linkage - Supplied by KTM Machinery Limited - Last used 2 years ago - Bought new on farm and done little work - This lot is part of a dispersal on behalf of the late Peter Hartnell None of the lots have been used since his sad passing approximately 2 years ago

34 rings (20'' diameter) - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

1.65m working width - Working when last used - C/w PTO - This lot is part of a dispersal on behalf of the late Peter Hartnell. None of the lots have been used since his sad passing approximately 2 years ago

Tank capacity 1000l - Boom length 21m - Leaky plastic valve, easily fixed - Leak on one of the plastic solenoids/valves - Other than that all working well, pump is sound, fold and unfolds as it should - Control box included - MOT out of date as machine is surplus to requirements - Loading is available onto trailer or similar

Serial No: 121089 - Spares or repairs - PTO shaft - 12' working width - Spider wheel on PTO shaft side getting noisy especially in heavy crop - Tyres slightly perished but hold air - Might be OK for small acreage - All tines present and tine return springs

Not used for at least 20 years - c/w PTO - Dry stored - Tyres holding air - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Dry stored - C/W range of spares (as photographed) - C/W PTO - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

3 Point linkage - Dry stored - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Dry stored - Approx 13' long x 5' wide - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

SKH REAR DISCHARGE FYM SPREADER - Dry stored - 11.5/80 - 15.3 tyres - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

C/W PTO - Dry stored - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Manual depth and width wheels - Dry stored - Mole boards have little wear - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

Spares or repairs - Needs some blades, belts and sharpening stone - Tyres holding air with tread - C/w PTO shaft and control box

Drive roller sheared off but new roller purchased but not fitted along with coupler - Last used in 2024 - Dual side conveyor - Tyres holding air - Lights present but untested - No weigh head

Tractor mounted - Working order - Lights untested - Spool controlled - No swivel shute - Tyres in fair condition

Spares or repairs - PTO present - Not used for a number of years

To go on power harrow - 3m working width - C/w control box - Current vendor has owned the drill since 2008 and it has had 1 previous owner - Loading available - DRILL ONLY, not with the power harrow

Filled with sand - Solid frame - Needs new bearing blocks - Loader tractor onsite to push/pull but collection with hi-ab/winch or similar preferred - Marked No 3

Unused by current owner however dry stored since purchase - C/w knife guard - Appears to be in good order

Spares or repair - C/w 2 hay gates (1 damaged) - No PTO shaft - Some tines etc need replacing - Assistance with loading - 1 tyre good, 1 soft

C/w depth wheels - Good framework - Reasonable wearing metal - 1 damaged tyre

3pnt linkage - No PTO shaft - Loading available - Not used recently

Used last in 2023 and was working at the time - Tyres holding air - Believed complete and would go to work, being sold due to being surplus as no crops grown - C/w disc markers - Dry stored, would look very different after a clean

Not used for atleast 10 years - Missing odd tine and has flat tyres - Will need some attention - Will need some attention to get working - C/w PTO

Good rubber - Bought new and done little work - 3PNT linkage

Serial No: 1614 - Always washed and oiled after use - Stored indoors - Seed hopper could do with some repairs

Disc spreader - Working order - Manual shut off - Always hot washed after use - Stored indoors - No control box

Working but owners not used in a couple of years so now surplus to requirements - C/w stand - Approx 1T hopper

C/w PTO - C/w adjustable rear packer roller - Blades have good metal left - Odd small hole in top - Working when last used 5 years ago

Hydraulic mast tilt - Rope in good condition - Hydraulic pipe perished - 3 point linkage mounted

C/w PTO - Hopper solid - 3 point linkage mounted - Manual open/close (stiff but working) - Barn stored - No assistance with loading

C/w PTO - 3 point linkage mounted - Manually adjustable seat - Little use - Blades in good condition - No assistance with loading

3 point linkage or A frame mounted - Would benefit from new rubbers - 1 side slightly bent

Adjustable leg positions - Some rust on sides of frame - Some parts need replacing

Lights and brakes untested - One tyre slightly perished - All chains present - Two small holes in lid - Not been used recently as now using contractors

Spares or repairs

All tines present - Most tips present - Manual folding

Serial No unknown - 9ft working width - PTO - Loading available onto trailer or similar - In full working order - Recently had new bearings on one of the rotors - Selling due to upgrade

Spares or repair - Needs a repair on the right hand wing as shown in pictures

28'' blade - Bought 4 years ago and vendor has never used it - Untested

Sold as spares or repair because needs new door & other parts but essentially it will spread - Bought new on farm - Rotor has been replaced - Tyres 23.1-26

Quicke brackets - Good edge & solid

With front pig tail tines, levelling board and toothed packer roller (good wear left) -- C/w up and over fitted hydraulic drill linkage (will lift over 1 ton) - All complete - Good working order - Last used 15 years ago - Always dry stored - Bought new on farm

1997 DOWDESWELL 4 FURROW REVERSIBLE PLOUGH - DP8B 3 + 1 - C/w Hydraulic front furrow adjustment - Mole boards are quite worn but still usable, will need some new metalwork - Good straight plough, the depth wheel leg has been welded and a bracket above - Not used for 10 years - Always dry stored

PTO driven - Hydraulic tilt ram - Does need new oil pipe - Not used for over 20 years, dry stored, does turn over - Not seen much use for age

C/w disc - Adjustable width - Good metalwork - 7'6'' wide - Not used for 10 years - Bought new on farm, always dry stored

132 Gallon poly tank - Would make good front slave tank - C/w suction hose - One nozzle is broken and will need some new pipe - Not used for 25 years - Bought new on farm - Always dry stored - C/w PTO

Water filled (currently empty) - New wood block bearings 2 years ago - In frame - Bought new on farm - Dry stored

Spares or repair - Faulty discs

Spares or repair

9' working width - In working order when last used - Selling due to the purchase of a newer topper - Loading available

80kg - 3 point linkage - In working order - Will need a new toplink for mast adjustment - Loading available

Vigo 20 litre press - Good working condition -c/w manual - Comes with crusher mounted on stand to collect pulp underneath - No longer used hence sale

Spares or repairs - No lights working - PTO Shaft - Electric weigh display is not working - Tyres OK - Lots of holes - Hasn't been used for 6 years - Weigh scales working when last used

Spares or repairs - Old cultivator, unsure on width, roughly 8-10' - Some tines broken - Loading available

No hydraulic shut off - No control box

Manual fold - Have not been used for a few years

Front or rear mounted - Heavy duty model - Has had welding done to it - 2.8m working width - Loading available

Good bearings - Working order

Good bearings - Working order - Little use

Spares and repairs - Floor pan needs to be replaced - Top deck timber needs replacing - Steel wire rope that comes down from the top link is heavily rusted - Gear box and bearings good - One belt new and unused, other belt only has 2 hours of use. Other fitted belt is in reasonable condition - PTO driven, but PTO shaft not included in sale - Tractor and loader available to help load if successful in purchasing

Approx 10' working width - No packer roller or crumbler roller - 1 bearing has gone and pins have seized

Allows for easy handling and bagging of potatos without bruising them - Forklift mounted - Lift up, attach bulk bag underneath, move leaver and fill bag - Bought for bagging firewood

Some corrosion/paint flaking - Marked number 2

Shelbourne Reynolds 100 cubicle bedder - Belt worn/ may need repair soon - JCB Q-fit brackets or A-frame mounted - Marked number 43

Tyres holding air - Last used a few years ago

Spares or repair - Serial No: 0023683 - No grass conditioner - 1.85m cutting width - C/w PTO shaft - Loading available - Owned from new - C/w manual - Barn stored when not in use - No holes in curtain - Known Oil Leak and other issues

Spares or repair - Missing 2 arms

Serial number: 4257 - Working order - Tyres have some cracking but hold air - Will need a new PTO guard - Vendor is selling due to retirement

Working order - Tyres have some cracking but holding air - Some springs on tine holders need replacing - Vendor is selling due to retirement

Spares and repairs - Antique - Original condition - Barn stored for many years - Everything moves as it should

Spares and repairs - Original condition - Barn stored for many years - Some of the wearing metal may need attention

Spares and repairs - Stored for many years - Some parts rusted and seized

3 point linkage - Bearings are good - Would benefit from having the point sharpened

Good solid set - Frame work all good and straight - Chain all complete has had some repairs in past but all straight now - Ready to go

In working order and spins fine - Has all its feet - Good metal work - Does need depth cables looking at

Strong old plough