9 X 6'' MULTI JUNCTION LAND DRAIN CONNECTORS

Various styles - Mostly complete

Various styles - Mostly complete

Various styles - Mostly complete

240/110 V - Good working order

Not used for many years - Turns over

7 stands in total, 2 with damage - Perrot fittings - Varying condition - Marked number 4

Untested and not used recently - Marked number 5

Only 3 pictured - Marked number 32

Some corrosion on framework - No brackets - Marked number 33

Approx 200m - 4'' diameter layflat - Some damage as pictured - No sleeves - Marked number 34

Marked number 37

Spares or repair - Cement mixer with lister engine - Has not been tested so assume it is a non runner

Sturdy metal cage

Yard scraper - 2 rakes - Hoe pick axe - Pick axe handle - Tamper

1 x 11' chain - 1 x 3' chain

2 x shaving forks - 2 x pitch forks

Spares or repairs 2 x 15' augers (1 without motor) - 1 x 19' auger - Will need attention but could be made good

Approx 20' long - Working - Can be loaded

3 1/2'' diameter - Single phase - Working order

C/w fuel dispenser - Working order - Lights work

Universal voltage

Stand & tank combination

115CM x 82CM - Feet width 74CM -

Spares or repairs

11m wide x 25m long

50L Draper compressor unlikely to work - 2 cylinder air cooled engine for spares or repairs

Can be loaded - Believed to be watertight

Working order but may need calibration - Table not included

C/W 240v pump - C/W delivery hose and gun with digital flow metre -

Purchased new in 2022 - Had very little use, only been used for 2 hours to process wood shavings for a biomass boiler - 7.5KW - 400V - 50Hz - Used to make pellets from various materials - Only been used for 2 hours to process wood shavings for a biomas boiler

Ford 4000 hub - 2 wheel bearings - Spindle repair kit

Approx 25% to 50% full - Approx 2 years old

Box of mixed sockets (Halfords/Britool - some sockets high impact) - Sealey Metric high impact sockets 16-32mm - 'Clarks' engine valve removal tool - Heavy duty jump start leads - Adjustable torque wrench

Bunded Fuel Tank - Built-in 12V Pump - Pallet Fork Slots

Starts and runs well but hasn't been tested under load

Various sizes - mostly treated - Lengths ranging from 2.5m to 4.8m

Reclaimed - Believed to have been from a timber framed conservatory or similar - Lengths ranging from 3m to 5m - Timber identified in the photograph laid on the floor

Quantity of unused 8'' feather edge boarding - 5 x 4.8m lenghts - 1 x 2.7m length

Has been recently moved from new light industrial unit to be replaced by doors and windows - Units were only completed in June and roller shutter removed earlier this month so light use - Door comes complete with motor, control box, covers and guides - Information from installer provided below but will fit opening 2.8m x 5m - One of two doors removed, both listed in this auction so ability to purchase a matching pair - Installer details provided: Installation date 10/04/2025 82mm guide cut at 5100mm Galv covers 500 x 500mm retro box RA L7016 RSL 95 shutters Cut at 2910mm (cut) RAL 7016 Motors MDF30-30-320 LLE 120 tube

Has been recently moved from new light industrial unit to be replaced by doors and windows - Units were only completed in June and roller shutter removed earlier this month so light use - Door comes complete with motor, control box, covers and guides - Information from installer provided below but will fit opening 2.8m x 5m - One of two doors removed, both listed in this auction so ability to purchase a matching pair - Installer details provided: Installation date 10/04/2025 82mm guide cut at 5100mm Galv covers 500 x 500mm retro box RA L7016 RSL 95 shutters Cut at 2910mm (cut) RAL 7016 Motors MDF30-30-320 LLE 120 tube

Removed from light industrial unit as part of conversion - Unit only completed in June this year so staircase has had very little use - L-shaped with platform - Handrails on each side - Dimensions: Height to platform c.1310mm - Total height c.3000mm - Step width 1050mm between handrails - Tread depth c.270mm - Riser height c.165mm

Removed from new light industrial unit as part of conversion - Total length of hand rail approx 10m

Various sizes & shapes - Largest 3' long x 10'' wide x 2'' deep

12 X 1/2 ton Dumpy bags - Ex cattle feed - Very good condition

Not used for many years - PTO does turn barrel - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

8' x 34'' wide - Never used - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

10' x 37'' wide - Plus 1 part sheet - This lot is part of a dispersal on behalf of the late Ron and Ann Moon. Nearly all the lots have been stood and unused for the past 10 years. Please note that there will be a collection day for all lots on Saturday 18th October between 10.00am and 4.00pm.

2.25m X 2.2m wide (excluding hangers) - 3.6m high - Box profile tin (some dents/defects) - Steel framework

Varying lengths - 1 x 32'' - 1 x 3' long - 2 x 4' long - 5'' - 7'' thick - No assistance with loading

Need removing with hiab lorry, telehandler or tractor with loader.

3 x 4' x 3' - 3 x 15'' - Will need removing with hiab, winch, telehandler or tractor

9'' wide x 2.5'' thick

3' wide

Approx 2.5m long - Loading available

No covers - Unused - Interlocking - This lot is part of the first part dispersal of garden tools and workshop equipment, due to bereavement. All lots have been dry stored and the majority are untested.

Some light rust, all useable sheets - 88 sheets - 800mm x 2500mm - 12 sheets - 650mm x 2500mm - 9 sheets - 650mm x 3600mm - 4 sheets - 650mm x 1800mm - 3 ridges - 360mm x 1800mm

Hydralime - 1 bag open - 3 unopened - Dry stored

Shower with a gas hot tap boiler & a gas bottle just attach to a water pipe and use - Used once

20 USED BOX PROFILE ROOFING SHEETS & FLASHING - 20 used box profile sheets in good condition, each measuring approx 3.6m length x 1m width coverage - 3 ridge flashings each measuring approx 3m plus , 1 x ridge flashing measuring 1.73m - 6 lengths of barge flashing each measuring approx 2.8-3m - Came off a 20' x 30' apex pitched roof shed

Take or leave what you want - Longest lengths 4.1m long - Marked No 24

Mostly 32mm, some larger - Includes some fittings - Marked No 25

- Believed to be 4 core - Part roll remaining

All in good order - Can deliver for extra cost

1 x 16' wide x 7' 6'' high approx - 1 x 14' wide x 8' 2'' high approx - Box section framework (not galvanised) - Some corrosion on framework - Door at back is not included

- Each brick is 7'' long x 3 1/2'' wide x 1 1/2'' deep - On wooden pallet - This lot is being sold as the final part of a dispersal sale

Each brick is 7'' long x 3 1/2'' wide x 1 1/2'' deep - On wooden pallet - This lot is being sold as the final part of a dispersal sale

5 are 3 metres long and 1 is 2.5 metres long - This lot is being sold as the final part of a dispersal sale

All 3.5 metres wide - 1.4 metres apex height - This lot is being sold as the final part of a dispersal sale

At least 6 at 14' - Sold as seen

45CM x 45CM x 5CM - 1 cracked

45CM x 45CM x 5CM - New on pallet - Believed all intact

45CM x 45CM x 5CM - New on pallet - Believed all intact

45CM x 45CM x 5CM - New on pallet - Believed all intact

45CM x 45CM x 5CM - New on pallet - Believed all intact

45CM x 45CM x 5CM - 2 damaged - On pallet

20CM x 10CM x 6CM - Approx 404 - New on pallet - Unused

20CM x 10CM x 6CM - Approx 404 - New on pallet - Unused