Serial No: 7414 - Trailer bed 13' long - Selling as no longer required - Always kept in shed - Bought new in 2017 - Original paint work - Done little work just earth mainly - Spare wheel tyre 14/65-16 - Tail board - extension made by owner but can be removed easily - only 2 bolts - Steel floor as new - Tail board included but a little bent but still fits - Lights working - Brakes and handbrake working

Good condition for age

Without the silage sides - Needs attention

Spares or repair - Has not got any lights or spare wheel - Needs brake cable, 1 broken spring but full set included for replacement - No electrics, was running with tailboard - - Twin axle needs cable hitch - Aluminium frame and body so is light weight

7 x 6' plus bucket frame - Ramps included - Brakes not tested - Used to move a mini digger previously - One light lense broken so will need a trailer board on collection

Unsure of age or history - Not braked mini tyres - Lights and tyres not checked - Light board will be needed for collection

Lights and brakes untested - Tyres inflated and hold air

Lights not present - Brakes not working

Tips ok, no leaks - Brakes need attention - Lights need attention - Tailgate & grain door - Tyres holding air

Ring hitch - Solid metal floor - Front dolly/steering axle - Strong frame - 4 good tyres all holding air - Lights need attention - Could serve a variation of uses, good height for gravity fed bowser trailer

Vin: SDHF35187T - C/w manual front winch - 18' long x 6'6'' wide internally - Rhino board floor, worn/decayed on joins - Fully galvanised - 4 tyres holding air with very good tread - Lights present and working - Drop-down & removable sides - Rear props & loading ramps - 3500kg gross weight

Believed 10T (max gross weight 12.35T) - 4 good tyres holding air - Hydraulic pipe, support bar damaged - 1 hub/axle bent on front wheel on one side - Floor mostly sound but some small holes - Some small holes on front join - Ring hitch has bend - Ideal trailer for dung/utility non-road use or repair

C/w bale extensions, lades and drop down sides - 1 owner from new - Barn stored - Good original condition

Base 16' long plus draw bar - Sprung draw bar oil or air brakes - Lights all working - Good tyres

Overnight accommodation for 2, sofa converts to make 2 bunk beds - Serial Number: 0260 SDRHJSHL9A701107 - Lights & brakes present & working - Handbrake working - C/w brand new spare wheel - C/w jockey wheel - Central partition - 1 breast bar - Rubber matting on aluminium plank floor, Recently checked, solid - New tyres recently - Ready to go - Gas cooker working, tap on sink works well, additional locker to store gas bottle which is fitted - Tank lock in good order - Has 2 saddle racks, 2 bridle racks & plenty of room to store rugs underneath - Still in use, only for sale as we need to travel 3 horses & as such are buying a lorry

Twin tandem axle - 15' 6'' wooden flat bed with 5' 6'' beaver tail - C/w ramps - Good tyres 215/75 R17.5 - Hydraulic brakes working - Lights work - 8' 2'' wide

Twin axle - Good tyres (435/50 R19.5) - Wooden boarded floor on top of original wooden floor which needed attention - C/w front and back bale lades - Hydraulic brakes working - Lights work - 8' 2'' wide - C/w strap box - Spring drawbar

Metal floor (needs attention at rear of trailer) - C/w one front bale lade - Tyres good (385/65 R22.5) - Air brakes working - Artic trailer conversion (fixed axles) - SPECIAL NOTE - Trailer floor has now been mended and additional photographs have been included to show this.

Mostly wooden boarded floor (old) - C/w one small front bale lade - Low loading (80cm high) - Tyres sound (245/70-17.5) - Ex lorry drag conversion - Hydraulic & air brakes working - Lights work

14' Tri-axle Livestock Trailer - C/w sheep decks - C/w spare tyre - Full chassis overhaul inc: springs, brakes, bushes, new hitch and handbrake, cables etc 18 months ago - C/w cattle partition gate - All good tyres (inc 2 new ones that will be fitted before trailer is sold) - Brakes & lights work - C/w sump

C/w 2' 6'' extension to make total length 27' 6'' - Twin axle - C/w front bale lade - Oil brakes - C/w side lockers (straps not included) - Rocking axle - Tyres have good tread & holding air - Lights working - Bed very tidy

Twin axle - C/w cattle partition - Brakes & lights working (bottom marker lights missing) - Tyres approx 95% tread - Chequer plate floor in good condition - Mudguards present but worn - Tidy for age - Small buldge in front

Serial No: 13234 - Handbrake and brakes working - Lights present and working - Steel and wood floor - Only used a few times moving small tractors - Has 900mm wide solid in fill ramps that was an extra - Hydraulic brakes, side locker box, galvanised side rails, LED side marker lights

1 owner from new - LED lights in guards - Air and oil brakes - Power tilt - NC 'magic door' - 4 tyres holding air, varying treads - Spring drawbar - C/w galvanised 'greedy boards' - Twin ram - Solid tub - Generally very tidy trailer - Inspection/viewing welcome

Rocking axle - Flotation tyres, varying tread but holding air - Turn-over hitch - Solid hopper and extension - Working - C/w control box - Fully galvanised - Electric dispensing

1 owner from new - Hydraulics brakes - Tyres holding air with tread - Lights working - Galvanised lead-up ramp - Wind-up prop - New version light fitting - Hydraulic topping - All metalwork solid - Same owner since 2010 - Dry stored

12' long x 6' wide internal - 4 tyres with tread - Solid chequer plate floor - New type light plug - Sprung tailgate - Jockey wheel and handbrake (jockey wheel tyre needs attention) - Overall tidy trailer

Ifor Williams TB5021-353 Tilt Bed Trailer - 1 owner from new, approx 2017 - 16'6'' long x 6'6'' wide - C/w drop-down loading ramp - Tyres all holding air but vary in tread - Manual pump - C/w jockey wheel and handbrake - C/w spare wheel and tyre - Removable drop-down sides

C/w drinking bowl and tap - Tap snapped but can be turned with pliers or similar - Tyres holding air with tread (some pending) - Handbrake and jockey wheel needs attention

Manual dispensing - Galvanised tub and framework - 1 tyres nearly new, one part worn holding air

TA510G livestock trailer - C/w sheep decks and partition gate - C/w spare wheel and tyres - 4 tyres, 3 with very good tread, 1 part worn - Lights present and correct - Jockey wheel and handbrake cable - Overall very tidy trailer

Solid Rhinoboard floor - C/w loading ramp/tailgate (removable) - C/w spare wheel and new tyre - Lights present (one lens cracked) - Wheel centres sprayed - Sides renewed

Front and rear ramps - C/w spare tyre - All tyres holding air - Rubber floor in good condition - C/w rear prop - Brakes and lights present but untested - C/w partition

Boarded floor - Brakes & lights work - GX126 - 12' x 6'

Weld mesh floor - Tyres in used condition.

Air lift & brakes - Total bed length approx 35' - 8' bed width - lights working tyres holding air - solid chassis - Lorry conversion - fixed drawbar - inspection & viewing welcome

Working ram but requires new hydraulic pipe - Good floor - C/w bin mounted on top with lid cut off

Spares or repair - Roller Coast Er8 boat trailer - Serial No: RCO150XG - 1.5 TON carrying capacity - Handbrake and brakes working - Manual winch - Average condition for its age - Requires a new stub axel - Floor is a roller bed in average condition

Bearings are not the best and tyres are starting to perish

26t carrying capacity - Handbrake works - Lights present and working - Brakes working - Good wood floor - Tyres in good condition - Sold as seen - NO MOT - Ideal farm conversion trailer

No sides, headboard or tail board - No spare wheel - Brakes & lights working - Tyres holding air (1 new & 3 old) & slightly perished - Floor quite new - Twin axle

Good strong trailer - Structurally sound

Mobile hopper with bagging off shute - Easy close sheet (small rip in front) - Commercial 8 stud lorry axle

Structurally good

Good working order

Year and model unknown - Lights and brakes untested - C/w jockey wheel - Tyres in good condition - Small compact trailer

12 x 6'6'' bed size - Lights and brakes untested - C/w jockey wheel - Has drop down sides - Wooden floor is useable - Tyres have 70% tread

10' x 6' 6'' - Lights present and working - Brakes untested - C/w jockey wheel - Wooden floor is useable

5 To carrying capacity - Lights are not working - Brakes untested - Frame in useable condition

6' 1'' wide - 18' long - Reasonable tyres - Brakes require attention - Wooden floor could do with replacement

5 tonne capacity - Brakes work - 5' wide - 8' 3'' long (internal)

Brakes's 1970 spec needs attention tyres worn - V tail gate not included - Six stud - Floor ok for muck

Tanco brackets - Old but usable

Comes with bracket for baler - Old but usable

C/w bobcat brackets - Not used for a couple of years

Euro 8 brackets - Floor has some rust holes but the rest of the bucket is still like new

Fully working

30'' width

Three point linkage

This bale spike came off a front loader on a Fordson Major - Still solid & good condition

C/w Euro Brackets - Bought new last year - Made by J Bourne Tractors - Bought new on farm - C/w own stands - Used last year - Well made - This lot is only being sold as the vendor has ill health

C/w Trima brackets - Some corrosion but still solid and perfectly useable

Sold as spares or repairs as pins very worn - Trima headstock - 1 owner from new - C/w stand

C/w dung fork and double spike - Bomford brackets - Working - 3rd service - Paint flaking and some worn hydraulics pipes - C/w stand

Trima brackets - Tines present - 1 pipe missing in photos will be put back on

Digger buckets for 4-6 tonne excavators - 1x 5ft grading bucket - 1 x 3ft digging bucket - 1 x 2ft digging bucket - All have the following dimensions - 45mm pin diameter - 152mm width - 240mm pin centre to pin centre - Will fit Takeuchi and similar 4-6 tonne excavators

Came off International 454 (can come with brackets if wanted) - C/w Dung fork - Odd rust spot on ram - C/w stand - Hydraulic pipes perished

On A frame & euro 8 brackets - Floor needs attention - A frame not included

Had little use from new - Very tidy - Good wearing shape - This lot is part of a genuine dispersal sale due to the property being sold by the auctioneers. Viewing is available by appointment only with the vendors. All lots MUST be removed from the property by Wednesday 2nd July at 5pm. No alternative collections are available after this date due to the vendors relocating.

Chilton brackets - 2 spikes - Solid framework - This lot is part of a genuine dispersal sale due to the property being sold by the auctioneers. Viewing is available by appointment only with the vendors. All lots MUST be removed from the property by Wednesday 2nd July at 5pm. No alternative collections are available after this date due to the vendors relocating.

C/w 2 buckets being 27'' grading bucket & 12'' digging bucket - Good working order - Please note not the tractor which is being sold as a separate lot which is lot 36

Twin tines - Solid frame - 3pnt linkage mounted

Tines straight & strong

Solid, strong bucket - Brackets believed to be old style MF (faucheuz) brackets

In good condition - Has just been repainted

Unknown brand

3 pnt linkage

Age unknown - MF 80 and other brackets -

Trima brackets, fit Euro headstock - Good strong squeeze - Good condition - No rust

Loader extension - On Euro brackets - Some surface rust but good condition

Spares or repairs - 6' 8'' wide - In need of some repair

To fit T6/T7 series plus associated case

To fit 66/67 & 76/77 series

Off wacker Neuson ET65 - 50mm pins - 165mm width - 350mm centre to centre

New, never fitted - To fit 6030-6430 - 5080R-5100R - 5620-5820

Pair

On frame - Pair

To fit 76/77 series - 265kg underslung weight - Front linkage PTO replacement weight - Front bolster style frame

Large style to fit T7 series plus similar case - With bonnet catch

Spares or repair - Pin and cone bracket

3 point linkage

3pnt linkage - Good working order - Side shift but not sure if working

Euro 8 brackets - Some wear on bottom edge - Solid build - Twin rams

Old Quicke brackets - Some perishing on hydraulic pipes - Twin rams - Very heavy duty.

Some damage & holes, will need repair - Back & sides solid

Euro 8 brackets - Bucket wearing thin in bottom, some very small holes - Working when last used a couple years ago (no longer required)

45kg each