Loading available

Spares or repair - Looks to be complete - Loading available

Working when installed - C/w motor

Used last year with new blades - Barn stored - Good working order - Fully offset - Adjustable skids

Working - On/off switch - No control box - Variable spread pattern

Lister Petter engine - Cast wheels

Adjustable leg - 3point linkage mounted - Strong framework.

Spares or repairs - Put away working but hasn't been used in recent years and pump removed from it since.

All adjustments working - Not seized

In good working order - Used this year

15kva Single phase - 240 volt - Previously used as milking standby - Recent service, included fitting of modern AVR (voltage regulator) - Double socket & speed metre - Help with loading - Could be delivered at extra cost

In working order - Fairly new PTO & support strap - Good solid top cover & frame - Skids have some rust holes but the main skid plates are solid and straight

Not used for a few years on pin & cone brackets - C/w hydraulic hose

Has land wheels

Spins up fine have complete gates & complete PTO shaft - Never been welded, good headstock - Some tines are broken

Runs up fine & spins fine - Good digging feet 5' wide - Missing PTO & depth cables need attention

Good working order - C/w gates, PTO & stand - The height adjustment is all working fine & moves freely - Does have 2 broken tines

In working order - Has had new bearing on shaft - C/w complete PTO - Has good ring hitch - Manuel lid all working fine - Tyres holding air - Has got some rust holes over barrel & lid

Good working order - Very solid - Blade is not missing teeth - C/w full PTO

Good solid set ready to go straight to work - Chains have had some repairs in the past but are still all good and strong

In good working order, ready to go work - All metal work solid & straight - Good solid skids - Just had new bearings - Blades have been sharpened - Could be painted but left to show metal work is all solid

Used last year to .... Fodder - Last used as a feeder wagon (worked when last used) - Good tyres

C/w transport trailer - Full working order - Used last year to do 150 acres with no issues - Fits a claas 492 forager model - Only being sold as no longer doing wholecrop

Came off Bateman RB35 crop sprayer - Working order when taken off sprayer

New lid last year - 5' 6'' cut - C/w spare set of blades - C/w PTO - Skirt tidy - Manual folding - Cut 10 acres last year

Rare 2 spring model - Disc freely spinning - Good metal on point

C/w spare mouldboard - New tips - Winder working - C/w Land wheel - Would go straight to work

Working width 2.3m - C/w PTO shaft - Good machine had main bearing break up so replaced with new & new flails - Not run up - Imagine some fettling will be needed but tough machine - Only used to clear brambles & reed grasses

Spare or Repairs - 90's machine - 12v hydraulic lift - 4 x 4 truck plough - Land rover chassis but can be adapted - Missing lift arm

Year unknown - 1 previous owner - C/w PTO shaft - Loading available - Fully working - Good machine for conditioning grass in the row or drying straw

Serial Number: 63 - 4m working width - C/w PTO shaft - Loading available - A few rotors weep - Bought for a job that didn't materialise

Spares or Repairs - Believed to be 90's - Doner baler so have had some bits off but could be salvaged, twist drawbar, good belts & hydraulics net wrap system

Believed to be early 2000's - 5m working width - Loading available - Hydraulic fold good, useable machine, sold as moved to grass tines - Well used

Spares or Repairs - Barn stored - Looks to be fairly completed - Not used personally

Spares or Repairs - Looks to be fairly complete - Not used personally

6' cutting length - Used 30 years ago - Barn stored - Some bits missing otherwise good 

TS 54A - C/w Disc & skimmers - All new wearing metal - Very little use - Tidy for age - Genuine reason for sale - Would go straight to work

Needs new points - Winders working - C/w land wheel

No control box - In working order when last used 2 years ago - 500mm wrap size

Badged - In tidy condition - Loading available

Spares or repair - Been sat a while but complete apart from swaff board - Loading available

C/w PTO shaft (new guard needed before use) - Guards welded back on

In good order, no rust or dents - Complete with rain cover, distribution head 24/12, pipes etc

1.6M working width - Adjustable swathe boards - tyres holding air - would clean up well - C/w PTO shaft

No PTO - Needs a new skirt - working when last used

C/w PTO - C/w Rear gates - Working when last used - odd tine bent

3 Point linkage mounted - Tines appear okay - Would suit a smallholder

C/w PTO (needs a new guard) - Untested - Offset - 3 point linkage mounted

Kawasaki FSFS481V Engine - 'DR Field & Brush cutter' - Electric key start with recent new battery - starts, runs and cuts as should - tidy cosmetic condition

Tines present - 1 tyre soft - C/w PTO shaft (new guard required before use) - Working when used last year

Used this season - 8 Damaged tines - working - C/w PTO shaft - 2 new tyres and bearings (central rotors) - Headland Adjustment (central rotor adjustment needs freeing up)

No lead bar - Framework solid but worn in places

C/w Lead bar & 3 trailing weights - web in reasonable condition

Suitable for ATV or similar - C/w Lead bar - May need some slight attention to one lead bar loop

C/w lead bar - solid framework - Made by Star Agri Engineering Co of South Molton - All loops for lead bar present

Working

Not used this year but was working when used last year

9' frame - Some rust holes in frame but still useable & used this spring - Both bungs present - Can be loaded - Believed to be full 

Good condition

8'' wide and 3'' deep - It can be filled with water - No leaks

4' working width - Has PTO shaft - Old but working - Loading available

Tyres have good tread and holding air but perished - All working as should - Small rust hole in back bar

Spares or repair - Serial No: B276N10247 - Small square baler - No control box - Has PTO shaft - Bent interior plate

Good solid tanker - Used a water bowser but vacuum pump still works - Many fittings connected for inlet/outlet options

Spares or repairs - Serial No: 64301987 - Has grass conditioner - 2.6m cutting width - Used last year to cut a small area of grass - Loading available

9' working width - Untested - Towable sprayer via drop pin - Loading available

Spares or repair - Has hydraulic shut off - No control box - Disc spreader

Has had some previous welds/ repairs - Untested

3 point linkage

Has no PTO or control box - Lights are not working - Loading available

Tyres holding air - C/w PTO shaft - C/w rear hay gates - C/w stand - This lot is part of an ongoing reduction sale due to a change in business policy. All items can be viewed by appointment with the vendors who also welcome enquiries

Working order - 16' long

Mega Hi-speed 22'/18T Silage Tipping Trailer with sprung drawbar - Serial No: PB06020 - Lights present and working - Full spec air and oil brakes on commercial axles with load sensor - Hydraulic tailgate with automatic locking - BKT 560/60 R22.5 flotation wheels and tyres and breakaway cable as new - Only done 2 loads - 22' x 6' tall with 2' enclosed silage extensions, 8' wide body - Tall rear silage extension, blow board to 1 side can be swapped to either side - LED road lights and side markings - Added extras: flashing beacon and rear reversing lights, rear crash bar, rear hitch, rear light socket and grain shute, full inspection window & camera ready with all wiring built in

Ifor Williams 10' Twin Axle Flatbed Trailer - 10' x 5' internal - C/w front winch - C/w lashing rings on flatbed - Rear ramp - Brakes & lights work - Key lock with keys - C/w spare wheel & tyre (unused) - Bought new on farm - Believed 2018 - Electrics on 13 pin plug - Boarded floor - Good tyres

Twin axle - No leaks or rot - Has been refurbished - Brakes & lights work - Good tyres - C/w spare wheel & tyre

C/w livestock partition - 4 new 185/60 R12 tyres - Brakes serviced - Gross weight 3500kg

Tyres show age but hold air - Tips up fine - Recently had a set of hydraulic hoses - Loading available

Old wooden floor - Tyres show age but hold air - Loading available

2022 Ifor Williams TA510 12ft Twin Axle Livestock Trailer - Cattle only - Sump Tank - 650/16 tyres - Serial No: SCKD00000N3030362 - Lights working - Handbrake and brakes working - Jockey wheel - Spare tyre - No sheep decks or partition gate - No cattle gate or detachable livestock container

10ft x 5ft trailer internal size - C/w folding sheep decks - Sheep partitions and cattle partition - Alloy chequer plate floors - Side access door - Spare wheel - Lights and brakes all working well - Tyres have good tread - 40 acre smallholding owned and has done little work - Really clean and tidy box - Only sold due to no longer keeping livestock

Single axle - Front and rear lades - Tyres holding air - Ring hitch - Has been used to carry out fencing supplies all winter

6'6'' wide - Recent new Rhino Board floor - Recent new lights and now working - Brakes recently serviced - 4 tyres with reasonable tread - Serial plate has come off - No sides, no spare wheel, no ramps.

Internal 200cm long x 122cm wide (ideal for quad bike or ride on lawnmower) - Good tyres (205/65D 10) - Solid boarded floor - Lights work - No brakes - C/w rear ramp

Timber bed has some rot but still useable - No brakes or lights - C/w front bale lade - Chassis solid - Tyres low tread, perished but holding air

Single axle - Tyres have good tread & holding air - Single ram - No brakes or lights

No brakes or lights - Tyres holding air but perished - 1 mudguard missing - C/w front bale lade - Timber floor solid

C/w hydraulic squeeze sides - C/w hydraulic tip - Not been used in 2 years - Barn stored - New hydraulic pipes 4 years ago - Tyres holding air

Twin axle - 8.9t max gross weight - Super single tyres approx 60% tread - Brakes & lights working - Twin ram - Some rust holes to front corner - Lift as should

Unfinished restoration project

Tyres holding air - Metal floor - Adapted IBC cage enclosure

Serial Number: SCKS00000N0801435 - Lights present & working - C/w Spare wheel - 750kg unbraked - Mesh high sides - Ramp tail door - C/w Jockey wheel - Good tread on tyres with no perishing - Handy little trailer in tidy condition - Minor damage to front mesh

Tyres holding air with tread - Solid Rhino boards floor (renewed 12months ago) - Lights present and working when last used - Drop-down sides - C/w loading ramps (heavy duty) - C/w key for lock - This lot is part of a genuine dispersal sale due to the property being sold by the auctioneers. Viewing is available by appointment only with the vendors. All lots MUST be removed from the property by Wednesday 2nd July at 5pm. No alternative collections are available after this date due to the vendors relocating.

1 owner from new - Rocking axles - 4 tyres with tread - Removable sides (in two sections) - Lights working - Tailgate & grain door - Brakes working

Solid timber floor - Good tyres, holding air - Drawbar previously repaired - wire tail gates - No lights

Single axle - Serial Number: 097271 - Bed size approx. 2.5m (8’2) x 1.3m (4’2) - Hydraulic tipping ram - Matching BKT flotation tyres with good tread - Removable drop sides, tailgate & headboard - Solid little trailer

Length: 19ft overall - 8 tonne carrying capacity - 13' 5'' overall bed length - Floor of steel bars - Selling as no longer needed - Viewing welcomed - It is a timber trailer but make unknown - Good and strong - Overall 7' 2'' wide - 2 small oil leaks on crane - Crane max 6 meter length - Suspension rebuilt - Some welding in places on crane - New spool block fitted Lights and brakes working, comes with spare wheel and tyre 14/65 16 - Always kept in shed