C/w Hakkifeed 472 feed in table - C/w power pack/engine PTO drive (key start) - 1 owner from new - SN: 50-33433 - 4M exit hydraulic elevator - Recent service in March/April, oil change etc - C/w spare splitter blade - Only had occasional use since 2021 - Manual hook/winch - Galvanised safety guard and work platform - Hakki Pilke Easy 50S specification available at: https://hakkipilke.fi-r.seravo.com/wp-content/uploads/2023/01/Manual-HP-50-S-Easy-2-2017-EN.pdf - Hakki Pilke 472 Feed-In Table specification: Log table length, extendable: 3,600–7,600 mm / 11’10”–24’11” Log table width: 2,200 mm / 7’3” Height, adjustable: 1,000–1,440 mm / 3’3”–4’9” Max. Log length: 5 m / 16’5” Weight: 925 kg / 2,039 lb - Enquiries welcome, being sold by a large estate who used to sell logs but this operation ceased in 2021/2 and therefore this size machine is no longer required.

C/w original light - C/w lots of spare glass all unused, enough to do the whole box and more - Handset also available (not original) - Solid metalwork, minimal rust - Can be loaded by arrangement

Converted into an office with steel lockable internal partition - Office area with 2 steel shuttered windows - Insulation with lighting and power sockets - Outer storage area with lights and power sockets - Wooden floor throughout - Ideal for farm yard office

Pottinger Faro 5010L Forage Wagon - Serial No: 16840000103 - 1.8m pick up with swivel wheels - Farmer owned - Low load count, approx 1350 - 620/40-22.5 tyres, 75% tread - 31 knives - Auto/manual load, 2 control boxes - Brand new drive chain - Easy to drive from 120hp - No known faults - For sale due to using a contractor now

0.8 cubic metre - Purchased new from Halse South West in January 2025 for a one off 10 cubic metre project - No longer required now that the project has been completed - Serial No: MSS80224647 - An excellent machine - Loading is available

2012 Krone Easy Cut 9140 CV Rear Butterfly Mower Conditioners - Used last year - Current vendor has owned for 7 years, only selling as does not need the conditioners - Good working order - C/w electric control box (not pictured) - Individual lift on each mower

Electric start - Bought new in October 2023 and used in 2024 - 19.2 hours only on clock - Only bought for wife to use behind gator, but now not needed - C/w Honda GX630 engine

Model: GB3 - Bought new in 2016/2017 new on farm (shop soiled). Vendor has hardly used it, would have done appox 100-150 acres in total and not used for last 2 years - Tidy condition - 3m working width - 3 point linkage

Serial No: 060269 - 2357 bale count - C/w control box - 750mm wrap size - Was purchased in 2013 - Hydraulic driven, operates on a four-lever cable control - C/w lift arm and wrapping table - Cut, hold & bale tip in good working condition - Good tyres all round - Has not been used in a few years and is barn stored - Specification: Bale wrap computer monitor counts bale rotation, lever locks in position after 2 rotations and stops at the pre-set number of layers, stores working bale totals and rotation speed, 4 lever control - Has 4 film roll holders, film cut and hold system - 'ground supported damper' to gently lower bale to the ground and self loading arm

C/w dual side dispensing elevator - C/w PTO shaft - Weigh dial & cells working - Tyres holding air - Lights present to rear untested - Not had much use since new belt fitted - Outside auger lined in September 2024 - Sale due to upgrade - Viewing, enquiries welcome - Swivel hitch - Genuine feeder from beef holding

Woods 4m hydraulic folding single pass cultivator - Had a new set of feet - No broken tines - Loading available

Serial No: EO 342 35555 - In good condition - Been barn stored - Last used 6 years ago and was working fine - Knotters may need some attention - C/w PTO shaft - Selling as vendor has purchased a bigger baler - No control box

Rota feed - 2.0m pick up - Owned approx 7 years - 62,261 bale count - Used last year, ready to go to work - Serviced by Hamblys Autumn 2024 - 2 new back tyres

Good points - 3 point linkage

3 metre - 1 broken leg otherwise in reasonable condition for age

Serial No: AZ 1072 - Owned for 10 years, serviced every year - Lots of new parts in recent years - New floor chains and slats - Shute doesn't swivel, wouldn't take much to fix - Working order - Trailed linkage - Lights working - Swivel shute Electric control

C/w rock spike - Telescopic arm - Hydraulic rear leg - Mast tilt sideways as well as back/front - Gripper plate - 240KG hammer - Transport locks/pins - Farmer owned machine, only sold as using contractor going forward

Used last year - Mower only as conditioner has been taken off - C/w PTO - Good working order - Good condition, very little use This lot is only being sold as the vendor has ill health

Not used recently but was working when last operated - C/w cover - Dry stored - Lights present and untested - Only minor surface rust visible - Hydraulic shut off - Headland adjustment

Owned for 7 years - Working order - Isobus ready with control box - Load sensing - Section control ready - Tyres holding air - Hydraulic tail lift - All tines present - Dry stored - Lights present to rear - Used by current owner as a backup machine in the last two years - Individual rotor lift and width adjustment - Electric individual heights adjustment - Happy to load onto lorry for buyer if required

Used 3 times - Makes a 60x70cm round bale - Ideal for the baling of all kinds of material from hay and straw, haylage and silage through to vine cutting - Requires 24-50hp - The round baler rolls the hay inside a chamber until it reaches a specific size, the Siromer baler has 3 density settings - The baler then automatically wraps the bale with twine, before ejecting it out of the rear of the machine. - An audible signal indicates bale ready, complete with an internal hydraulic pump for superior bale handling and ejection, eliminating the need for spool valves on your tractor - C/w PTO

In good working order - Just been fully serviced, fresh oil, filters and spark plug - Has brand new belts - Has had a brand new carb fitted - Some new flails - Runs fine, starts on first pull and cuts well, as shown in pictures - Can be offset or straight behind quad - Has adjustable height cutting depth

C/w PTO - All tines present straight & strong - Skirt does have odd rip - Working when last used, last year - Barn stored

Tyres holding air - C/w PTO shaft - Same owner for 10+ years - SN: CC0342A240316 - 1.4M pick-up approx - Rear ball hitch to attached sledge - No lights - Last used in 2024 summer without issue

Tyres holding air - C/w PTO shaft (new guard needed before use) - 1.55M pick-up approx - No lights - Same owner for 2-3 years and was serviced when purchased (2-3 years ago) - Worked baling straw in 2024 without issue

Trailed - Spares or repairs - Metal conditioning tines - Lights need attention - C/w swath/grass grouper - C/w PTO shaft - Used in 2024 - New PTO guard required due to odd niggles with grouper, PTO guard and some other odd bits

3 point linkage - C/w control box - Approx 14000 bales - No welds/repairs - 750mm wrap

2005 Claas Quadrant 2200 Rotor Feed Baler - Bale count: 26063 (believed to be incorrect and was a fault with previous owner) - Bale size: 120 X 70 - Pick up width: 1.2m - C/w control box - C/w PTO shaft - Rotor feed - Moisture meter - Bale camera - Twin axle - New type contol box - Knotter blower - Cam track bearings and knotter roll pins done last year (3500 bales ago) - Owned for the last 8 years and mainly done straw - Selling due to upgrading. - Serial No. M96602

C/w PTO - Used to bale grass last year - Barn stored - Hydraulic rear door - Tyres have good tread, holding air but perished - String only - C/w manual - C/w some spares - Rollers in good condition

Galvanised skids - Very tidy condition - C/w PTO shaft - SN: FO91712100 - This lot is part of a genuine dispersal sale due to the property being sold by the auctioneers. Viewing is available by appointment only with the vendors. All lots MUST be removed from the property by Wednesday 2nd July at 5pm. No alternative collections are available after this date due to the vendors relocating.

Believed to be Twose - Believed to be empty - Some corrosion on ends - Solid frame - Scraper bar - Metal shaft casings - Small loader tractor to assist with loading - This lot is part of a genuine dispersal sale due to the property being sold by the auctioneers. Viewing is available by appointment only with the vendors. All lots MUST be removed from the property by Wednesday 2nd July at 5pm. No alternative collections are available after this date due to the vendors relocating.

C/w PTO (not pictured) - 2.7m working width - C/w rear roller bar - Some surface rust/flaking paint - Flails appear in good condition - Working order

Serial number: 13783 - 6'' fill pipe - Splash plate - Rear fill point - C/w PTO shaft - Lights working - Brakes working but hand brake ratchet siezed - Mec 9000 pump with new vanes - Gearbox and vacuum oil changed - LED lights - 550/22.5 tyres 90% tread no cuts or cracks - Hydraulic brakes good - Bought new from Halse SW - Had very little slurry use, used for road washing, cleaning drains and water troughs. - Not from dairy farm

Can handle up to 10' diameter timber - This machine was completely refurbished all through approximately 4 years ago including fitting 4 new blades, only been lightly used since - in good working order - Viewings recommended can be seen working if want to - Selling due to change in circumstances.

Serial number: 1745.50.714 - Bale count: 67,000 - Pick up width 2.2m - C/w Control box - C/w PTO shaft - 17 knives - Just has a new pickup bearings, pickup chains & chamber chains - C/w inline wrapper drawbar

SN: L1394 - C/w PTO shaft - Loading available - Had a new top hat and a few new wearing parts this year

A.M.R HPF 28 ton horizontal logs splitter 3 point linkage - PTO drive pump - Hydraulic height adjustment of the splitting knife into 2 or 4 pieces - Hydraulic loading arm - very little use so in good condition - Always stored under cover

Single axle - SN: SN24498 - Trailing shoe capability - Rear filter, electronic control box for trailing shoe - Air brakes - Rear filler pipe - C/w control box - Brakes working - C/w PTO shaft - Light working - Good condition - C/w splash plate - Rear filler valve and pipe - Wide angle PTO shaft - Tyres are approx 80%

3M lift - C.w control box - Lights working - 2nd owner - Over seed pasture in one pass - Harrow, seed and roll in one go - Einbock seeder unit - C/w grass seed and turnip seed metering wheels

SN: T464242 - 3M - Loading available - Harrow for front tractor - Can be rear mounted also - Only used for one season

Small bales - Year and make unknown - C/w PTO shaft - In working order - Has been stored inside - Done just over 1500 bales in 2024 with no problems

Used recently - Full good working order - 2 good tyres, 1 brand new (unused) & 1 bought old (750/70 R26) - Brakes work - Lights may need attention - Model: VT - C/w slurry pipe & PTO - Sprung drawbar - Only being sold as vendor has bought one with loading arm - C/w drop pipe

Used this year - Good working order - Serviced and ready to work - Only being sold as bought a wrapper with a loading arm - Done approx 35,000 bales - C/w control box with remote control

Used recently - Good working order - Good tyres - C/w PTO - Only being sold as upgrading

Used in June 2025 - Full working order - Discs have good metal left - Hopper solid - Tyres low on tread but holding air & perished - No rust on rams - Hydraulic pipes good - C/w set of spacing blacks

Water fitted - All bungs present - 8' rollers in 9' frames - Wooden bearing blocks mostly in good condition - No cracks or welds - Manual folding

12cm girth - Petrol - Only used for approx 2 hours (bought new by vendor) - Towable - C/w stand - C/w 420cc engine - Good tyres

1 owner from new - Lights present and working - 1.2m head - 65hp pump - Oil cooler - XTC electric joystick controls - Forward/reverse - Inspection, viewing welcome

C/w A frame - Set up for front mounted use - C/w control box

Very little use from new

In use right up to sale date with sale only due to upgrade - Metal tines, some worn - No visible leaks or oil - C/w PTO shaft but new guard required before use

Lely Lotus 770 Stabilo 6 Star Turner - 1 owner from new - Tyres holding air - Odd tine worn - C/w rear fenders - Used this season - Popular hook-tines - In use right up to sale date with new machine only reason for sale - Inspection, enquiries welcome

Hydraulic folding - Tyres present - Most wearing metal complete - Solid framework - Viewing/ enquiries welcome

Becker 80 STI.5 Woodchuck Bedding Spreader - Q-fit brackets - 2 new recent bearings - Solid tub & framework - Dual side dispensing - Working order - Genuine sale due to milking herd being sold

Serial No: 14 RW/10 - Same owners since 2019 when it was re-lined, now being sold due to sale of cows but was in use until recently - Tyres with tread holding air - Weigh screen/dial works as it should - C/w PTO shaft (new recently) - Good hydraulic pipes - Lights to rear & inspection ladder - Hydraulic discharge shute - Single side dispensing - Working order

Metal conditioning tines - Used this season, had new set of blades - Owner upgraded to newer/lighter mower - Variable width swathe boards - C/w PTO shaft - Enquiries and viewings very welcome

As new, never been used - C/w PTO shaft - Cuts and splits (up to 330MM and 6T splitting pressure) - C/w 4M exit conveyor - Hydraulic feed-in belt and exit elevator - 3pnt linkage mounted - C/w manuals etc - Trailer not included - Delivered by Halses week beginning Monday 9th June

Capacity on plate - Tyres uneven, one very good and one part worn - Pump working - C/w PTO shaft - C/w slurry pump - Hydraulic pipes perished - Solid chassis - Year unknown

Owned since 2016 - Used on dairy holding to harvest approx 200-250 acres but not used in last 2 years hence sale as is now surplus - Full metal detector - C/w additive stand & applicator - 2 good tyres with tread - Renewed blowing bands approx 5 years ago and new belt 4 years ago - Shute hasn't had new shute liner but has double extension for side loading - C/w control link box - Spout lights - Inspection & viewing welcome

2012 Krone Easycut 3210 CV Mower Conditioner - 1 owner from new - Hydraulic drawbar - 2012 made but first used on farm in 2013 - Metal conditioning tines - 10' cut approx - Good tyres with tread - Lights present but need tlc - Working order - C/w PTO shaft - Hydraulic adjustment - Some corrosion on side hoods - Skids replated in 2024 - Used annually on dairy holding cutting approx 300 acres each year

Not used for 15 years - Working when put away - Barn stored

Tramline kit - Working - Same owner for last 5 years - Hydraulic folding

25 year Silver Jubilee Model - Original bearings, tyres etc - C/w PTO shaft - Serial No: B652X1099 - Needs a clean & emptying - Some minor surface rust & barrel appears solid - Dry stored - Rare example - Hydraulic lid - Believed to be made in 1977.

Working - Lever controls - Had previous repair on main beam by previous owner - 1.3m head - C/w PTO shaft - Hydraulic pipes appear ok but some perishing - Cosmetically not the tidiest - Will be split from tractor for collection, telehandler on-site

Not used this year - Used last year - Working order

Had some welding - Tyre perished & holding air - Ploughed 150 acres this spring - Working order

Tyres very good & holding air - Very tidy condition - Baled hay on Saturday

Right hand cut - Factory built, working & ready to go - C/w transport draw bar - Wheels & tyres new - 2nd world war age

Working order - Been used up to date - Only being sold as bigger rake from a neighbour came up for sale

Serial Number: 3530552 - Was in good working order when last used 2 years ago - Been dry stored - C/w core wood feed table - Fork lift for loading

Serial Number: 992437 - Bale count: 39607 - C/w control box - C/w PTO shaft - Good working order

Last used in 2023

Working order used last year - Would benefit from a service, but could go straight to work with a bit of grease - Has not been washed off yet as we don't like washing down at the end of the season - Selling due to upgrade - Has had most of the chains replaced recently - Makes nice tidy bales - Approx 88k bales. - Comes with control box

Spares or repairs - Needs some of the arms bolting back on and some bearings replaced - The vendors have most of them - Was good working order before being taken apart - Year unknown

Spares or repair - Has had money spent on it to inc; new hats and new blades - Spares or repair due to blade hitting somewhere

Good mechanical condition - Bed has had all new bearings 3 years ago - Skids are good - Paint and skirts are tatty - Quick fit knives, will also come with new knives fitted - Only selling as upgraded to a 3m

Single Phase - Working when last used 2 years ago - Timber on hopper appears solid