146,643 miles - Reg: N205 WJH - No MOT - Currently sorn - 5 speed gearbox - No catalytic convertor - Needs new battery - Some rust to front wing - Scuff to rear bumper - All tyres holding air

16' - Some holes in floor - No mudguards - C/w homemade ramps - Jockey wheel present but damaged - Lights present but untested - Non automatic reverse - Tyres holding air - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

8' - 16 gauge - Manual operation - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w block and same tooling - Made by Ajax machine tool co - Very very heavy - 3 phase - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w helmet and goggles - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

1988 3T Capacity workshop ramp - Lift master MK2 - 3 phase - Working - Buyer to dismantle and remove (this will need to be doing as soon as possible to allowed other machines to be removed) - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Inc: 4 Jaw chucks, 3 Jaw chucks, Face plate, Drive plate, Steadies and other tooling - Very heavy - Made in Italy - Dimeo Manzoni 31 - c/w Electric motor - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w two roller tables - C/w motor - C/w some spares - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

25AR metal boring machine - Model 25AR - C/w drill press vice - Freestanding - Ref No: 04407B - Chain driven - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

On wheeled trolley - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Machine No: 1638 - Freestanding - C/w some spares/ tooling - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Freestanding - C/w some spares - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w collect chuck & set of collets - 1958 - Freestanding - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Freestanding - C/w sanding belts - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

On wheels - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Single phase - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Freestanding - 3 phase - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Spares or repairs - Freestanding - Dismantled and known not to work - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w weights - Freestanding - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Freestanding - Single phase - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

3 phase (electrics appear to be adapted/ joined) - Freestanding - Machine No: 994 - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

High pressure - 46'' wide (excluding controls) - Approx 7'10'' high - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Single phase - C/w some tooling - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears water tight - Some damage to front door - Roller shutter working but would benefit from some TLC - Approx 2.2M tall - Believed galvanised exterior - Buyer to remove from Tuesday 28th May - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Roof appears water tight - Floor slightly rotten at the front - Roller shutter seized - Some damage to rear wall - Approx 2.2.MM tall - Believed galvanised exterior - Buyer to remove from Tuesday 28th May This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Spares or repairs - One believed to be a sheet bender - The other is express dual - Most parts seized - Buyer to remove by Tuesday 28th May - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Twin axle - Some tyres flat - Holes in floor - Some lights present but all tested - Drop down tailgate - Galvanised sides - Jockey wheel seized - Trailer is not currently roadworthy - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

10'6'' twin axle tipping trailer - 4'2'' tipping bed (excluding surround frame) - Some tyres flat, all perished - C/w manual winch - Hydraulic manual tipping (will need attention/ repair before use) - Jockey wheel present - Lights present but untested - Floor has holes - Currently not roadworthy - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Tyres holding air (one soft) - C/w rollers - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Twin axle - Jockey wheel present - Some lights present but untested - Some tyres soft/ flat - Floor has holes in it (wooden) - Currently unroadworthy - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Some lights present but untested - Some tyres flat, all perished - Floor disintegrated - Hay still in trailer - No jockey wheel - Trailer is not roadworthy - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Single axle - Damp/ tarnished inside - Tyres flat - Lights damaged - Unroadworthy - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Single axle - Galvanised - Tyres holding air - Lights present but not tested - Floor solid - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Single axle - Tyres perished - Lights present but untested - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Channel, wall, ducting etc - Mostly 10' long - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Some corrosion throughout - Approx 30' span - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Approx 6' long x 5'6'' high - Some corrosion around base and wings - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Approx 30' long - Appears solid but been sat for some time - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

13'' x 9'' - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w Tap outlet - C/w cage - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

23 upright sections - 8 boards - 8 cross-members - Most sections are 7' long with some 10' - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Lots of glass panes & surrounds - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

3.9m long - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w winch - Both tyres holding air - Lights present but untested - C/w wheel chock - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

3 point linkage mounted - Untested - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w mast and sail - Unknown if fit for water - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Not on pallets - Over 100x 10' panels - Mixed widths - Some other parts included - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

3 point linkage mounted - Reasonable web - Slightly bent but still very useable - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Approx 25 x 3m - Odd bend - 82cm wide - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

All 4 tyres soft, perished and seized - Metal solid - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Most are 18' long with some off cuts - 39'' wide - Some bends to edges - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w ladder - Galvanised - C/w roller - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

All mounted in 1 frame - Generator is Stamford - Compressor is Sherry & Son - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Many off cuts and shapes - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Between 2m x 2.5m long - Between 1m x 1.5m wide - Mixed thicknesses - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Mixed diameters - Between 80cm x 2.1m long - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Mixed widths - Between 90cm x 2.8m long - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Mixed widths - All around 2m in length - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Mixed sizes - Between 1m x 2.5m - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

2.6m x 1.6m - Tin solid - Smaller door to walk through - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Tin solid - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Many mixed sizes and lengths - Mostly off cuts - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w some bolts - Unsure if complete - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

60% tread - Goodyear - Believed sound - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

8 hooks - Heavy duty - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Various diameters & sizes - Mostly solid bar - 28'' long x 20'' across - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Big length approx 8' long x 6'' wide x 5mm thick - Smaller lengths 4'6'' long x 6'' wide x 25mm thick - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Believed to be brass - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

At least 22 substantial lengths - Longest is approx 9', shorter lengths are approx 5'-6' - Thickest is approx 6-7mm thick - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Approx 10' + 13' long - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Length varying from 3'10'' - 6'6'' - Various thicknesses - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

All solid - 3m longest length, 2; shortest length - Approx 9 lengths - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Longest approx 3.8m, shortest approx 0.8m - Variety of sizes, mainly 1'' x 1'', some larger, some smaller - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Longest approx 2.4m, shortest approx 0.8m - Variety of sizes & thicknesses - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Longest approx3.4m, shortest approx 0.8m - Variety of sizes and thicknesses - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Longest length approx 2.5m, shortest approx 1.3m - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Approx 3' - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Wheel nut wrench - Complete - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears complete - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears unused in box - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears new in box - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears unused in box - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Appears unused in box - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

Unused in box - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

- This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

3 full sheets varying thicknesses - Several part sheets - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w case - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.

C/w case - This lot is part of a genuine full dispersal sale on behalf of Brookthorpe Engineering Ltd (the late Mr NB Twissell). The business has been closed for a period of time however the majority of tools and equipment were in use up to the time of closure. Viewing days will be held on Friday 17th May and Monday 20th May between 10am & 4pm where interested parties can view and inspect the lots. Two collective days will be held on Friday 24th May between 9am & 5pm (not for larger metal working equipment) and a second day on Tuesday 28th May between 9am & 5pm. Please note all machines and tools are 3 phase unless otherwise stated, are untested with regards to their working condition and although a small older teleporter is on-site some machines will require specialist lifting equipment for removal and this will ultimately be down to the purchaser to arrange and facilitate.