C/w metal framework - Can be loaded - 11'' Diameter

Metal mountings - Can be loaded - 13'' wide

3 point linkage - Loading available - New rope fitted - New hydraulic ram & pipe fitted

6' working width - C/w PTO shaft - Just had gearbox seals - All run up and tested

Good wearing metal left - No cracks, welds or bends to beam - Hydraulic pipes perished - No rust on rams - Hydraulic front furrow adjustable - Metal land wheel - 3 + 1 configuration (can still add furrow to back)

Twin disk - Headland management - Adjustable speed/distance - C/w PTO - Hydraulic shut off - Spools very rusty - 1 mesh cover bent - C/w cover - No lights (damaged)

Spares or Repairs - Very rusted - Chassis solid - No PTO - Tyres have good tread, holding air but perished - C/w hydraulic ram - good chains

Spares or Repairs - Few pieces & items missing (1 bed auger chain, wheel to go on the pick up, 2 fan blades not on the fly wheel but with the machine & 2 soleniod Valves missing) - Last used in good working order - New sharping stone fitted 5 years ago - New set of blades fitted 5 years ago but they are rusted. they will clean up.

Tidy hedge trimmer last used 3 years ago when it had a new belt - Hydraulics all good but top pulley damaged in storage - Will need replacing - Missing PTO shaft Spares or repairs - Three point linkage - Control type: Levers - Loading available

C/w PTO shaft - C/w roll over cover - Not used recently - Very little corrosion visible - No lights - Working order

In working condition but may need some attention and a couple of bearings may need replacing

3500kg - In working order

Used this season - In working order

9' frame - Full of concrete - Can be loaded for purchaser - Solid frame

Working width 1.5m - C/w PTO shaft - Loading available - Working order, new PTO 2 years ago - For sale as no longer required

Spares or Repairs - Flat transport tyres (been stood) - 4M crumbler roller - Does not work but reason unknown purchased as refurb project which never developed

C/w Three 6'', 8'' & 12'' augers with a box of new points and cutters - No cracks or welds - Has always been dry stored

C/w PTO - Loading available - Working order but we have purchased a bigger one

Working order

Working order

Working order

Working order - No brackets

Couple links missing but can still be used

Last used 2012 - Barn stored - Put away in working order - 40mm webb

5ft wide - Roller to be pulled behind tractor or quad bike - It swivels on the hitch - Selling due to bereavement

Age related condition - Working order - All proceeds for this lot is donated to the four chosen cancer charities that Stags are raising money for throughout the year.

With Manitou brackets - Working order - With slight kip in belt

Approx 75'' wide by approx 19'', Granite is 66'' wide - Can be pulled behind machinery - Selling due to bereavement

12' Working width - Loading available - C/w PTO - In good working order - Tires holding air - It had been oiled up so it's ready to go to work - It is tidy for its age and does a good job - Ideal for any small holding - Selling dude to upgrade

4.5m working width - Unknown year - Will need new wheel bearings or take wheels and legs off - Also one tine is 1/2 broken on one leg, they where made with two sides - Unused after purchase at a farm sale - so may need freeing with some oil and machine to unfold

Approx 25' boom width - Manual boom height adjust - C/w PTO - 3 section control - C/w clean water tank - C/w Manual/parts book - Approx 350L tank size - Please note this lot is for sale due to a bereavement. No viewing is available and purchasers should satisfy themselves with the auctioneers comments & pictures. There is no loading available.

C/w PTO - Galvanised hopper solid - Manual shut off - C/w Manual - Please note this lot is for sale due to a bereavement. No viewing is available and purchasers should satisfy themselves with the auctioneers comments & pictures. There is no loading available.

3 point linkage mounted - No bullet - C/w Land roller - Disk slightly seized - Please note this lot is for sale due to a bereavement. No viewing is available and purchasers should satisfy themselves with the auctioneers comments & pictures. There is no loading available.

Just been fully refurbished by vendor - Loading available - Ready to go to work

Loading available - Used for loose material like sand, stone or soil - Heavy duty steel construction - Can be used on 3PNT linkage or pallet forks

Very little use since new - All good metal with very little wear - Adjustor working as should - Original paint

8' working width - Loading available with pre arranged time with Vendor - All feet and tines in good condition

As found condition - Please note that photos & description were taken in April

C/w PTO - Loading available - Needs 2 new blades - Tidy machine

Spare or Repairs - Last used 2 years ago - Rusty

C/w adjustable leg - C/w slitter disk with bearings - C/w 2 stands

In working order - Could do with a service

Good tines & feet

Serial Number: 87479/2 - Usual wear for plough of this age

Rear coupler & guide - Hydraulic folding (rust on ram) - Pipes appear in good condition

Spares or Repairs - Tank capacity 625 gallon - 12m working width boom length - Loading available - 2 sprayer bodies missing - On/off taps missing but functional - Working order - Boom straight - No cracks - Winch working fine - Pump working

Serial Number: 214351431 - C/w disc coulters - Manual Vari-width - Hydraulic pipes are slightly perished - Good working order - Hydraulic front furrow - Shear bolt leg protection - Skin tips good

C/w PTO shaft - Loading available - Complete and ready to work or show - Suits MF 35

C/w disc coulters - C/w Manual Vari-width - Missing tip is included - Good wearing metal

Loading available - Good working order - Suit work or play

Loading available - Adjuster handles seized

Everything is moving freely - Would go straight to work behind a small tractor

C/w disc coulters - C/w manual vari-width - 2 tips included - Good tidy straight plough

Needs repairs but very good hopper

3pnt linkage mounted - Tines mostly solid - Hydraulic pipes perished

Spares or Repairs - Not used for many years - Barn stored until recently - Will require an overhaul & new cables - Good project or for spares

Good Solid condition - All tines appear to be present

Spares or Repairs

Good working order - All turns smoothly

Spares or repairs - Tyres holding air - Lights present - Corrosion throughout

Spares or Repairs - C/w PTO shaft - Loading available - Broken shaft between 2 & 3 - Broken arms on star3

C/w PTO (would benefit from new guard) - Few small holes in bed - Blades well worn

Barn stored - 1 tyre very soft

Drive not seized - Rusted - Would benefit from new blades

Rear discharge - Floor appears solid - 1 tyre soft - Some rust holes to front

Good wearing metal - Could be MF

Mechanically working - Hood needs welding/repair - Front left corner needs welding prior to use to ensure even weight spread - Spares or repairs - C/w PTO shaft - 2 new blades a year ago or so

Spares or repair - Tyres holding air - C/w P-up hitch - Requires new PTO shaft - Parked up for a long time

Tyres holding air - C/w P-up hitch and PTO shaft - Spares or repairs, parked up for a long time

Some damaged discs - Inspection welcome

All working - 3.2m long - 175MM diameter - Oil pipes in good condition

Selling due to ill health & changing in farming policy 

Spares or Repairs - 3 point linkage or trailed - Not been used for 30 years - Always stored in the dry - Good condition

1 wheel bearing damaged - Winder seized - on 34'' cast wheels

C/w PTO - Working when last used 12 years ago - Sides and floor appear solid - Tyres holding air but perished - Odd pick up tine bent

C/w PTO - Some rust to top - Blades appear okay

C/w motors - For grain/ product transfer over a wall or similar

C/w motors - For grain/ product transfer - Working when removed

C/w motor - Bucket elevator - Approximately 22'-23' high/long - Can be loaded - Vertical

Stored outside - Heavy - Solid - Not used for a while

I do not have any farm machinery to help with loading of this piece of equipment but I may be able to arrange assistance if required, please make sure to contact before hand.

Last used 12 months ago - May need some attention - This lot is part of a dispersal the vendor having sold the property

Spares or repairs - Bar broken inside-  This lot is part of a dispersal the vendor having sold the property

3 point linkage - Bought new on farm - Only used on small holding - This lot is part of a dispersal the vendor having sold the property

Single phase - Working order (does make a noise when running) - Spear is 2.25 metres long - This lot is being sold due to a change in farming policy. The Vendor no longer keeping suckler cattle

Has been used as a feed mixer for last 6 years - Previously was working as a grain dryer but Vendor does not warrant working as a grain dryer - Good tyres

Good condition - C/w spares (as pictured) - This lot is being sold due to a change in farming policy. The Vendor no longer keeping suckler cattle

Last used this year - Not had much use - Tidy condition

For compact tractor - X-Demo, little used - Working width 1.8m - Engine power 20-35hp - Cutting height 3cm or 6cm - Blades x3 - Length 1892mm x width 1450mm x height 600mm - Three point connection - Cat 1 - Serial number: 202100524001 - C/w PTO - Loading available - Little use

Only used once - 1 linkage point bent

New rubbers and skid needed - Some attention needed on one side

Bearing blocks need replacing - Unknown age - Used on small holding for 25 years - Filling bungs - Rollers are empty - No loading available

C/w PTO shaft (needs new guard before use) - All functioning as it should except from damaged spout and crack on hopper

Spares or Repairs