2019 Bomford Turner Falcon 5.5 Hedgetrimmer - Can be put on 3 point linkage - Power slew - Cable control - Procut 1.3m head (T flails) - Roller on head is tight and may need a new bearing - Bought new on farm - C/w stands (as pictured) - Hedgetrimmer will be taken off before sale - Always barn stored when not in use - This lot is a part of a genuine unreserved dispersal. The vendor having ceased all farming operations

2010 Richard Western D8 Rear Discharge Fym Spreader - 8 tonne - Vredestein 460/85 R38 tyres (approx 70%) - Used recently - Always barn stored when not in use - Bought new on farm - This lot is a part of a genuine unreserved dispersal. The vendor having ceased all farming operations

Bought new on farm - Good working order - Last used last year - Always barn stored when not in use - This lot is a part of a genuine unreserved dispersal. The vendor having ceased all farming operations

C/w PTO shaft - C/w 2 control boxes - Auto lube & front conveyor - Tyres holding air - Augers good - Swivel hitch - Single axle

Has been refurbished by Daleagri with new bearings, pipes and belts - All running gear, new rims and tyres - Heavy duty gear box with low and high - 12 meter discs land drive - Good spreader

C/w Control box - 750 wrap size - Linkage mounted - Works well and was used last year - Also had all new scissor ram seals last year

1 Owner from new - All arms present & correct - All tines present - C/w PTO shaft - Used this season - Some minor holes in skirt - C/w rear fender - Dry stored - C/w Stand - Genuine well kept machine being sold as part of a genuine phased reduction with four other grassland machines also in the sale

1 Owner from new - only wrapped 6569 bales - Dry stored - C/w Control box - Used this season - Very tidy - Tractor mounted - Genuine well kept machine being sold as part of a genuine phased reduction with four other grassland machines also in the sale

C/w control box - C/w PTO bed tidy - Tyres bold - Blades tidy - Swivel shute - Some damage to body - Lights present but untested

13,318 bales from new - Same owner since nearly new (2-300 bales) - Used this season - Serial Number: 708830 - Tyres holding air with good tread - 15 knife chopper unit - Crop rollers - Cosmetically tidy - Lights present - C/w PTO shaft - C/w Pair of chocks - C/w control box - Genuine well kept machine being sold as part of a genuine phased reduction with four other grassland machines also in the sale

3 point mounted - Double rollers - Single Hose Guide

C/w PTO shaft - 10' cutting width - Help with loading available - Good working order

Serial Number: C00182 - Capacity 2400 - Pump and front trap, - 2x Front and 1x Rear Height Sight Glasses, - Sprung Drawbar, - Rear Fill, - Front LH and RH 6'' blanks, so could be made to front fill, - Hydraulic Braking, untested - Trailer Lights, untested - Rear Work Lights - C/w PTO - LH tyre bead damage so would need replacing at some stage, very slow puncture.

C/w Ballast Crate & stillage - Reasonable tines - C/w 4 legs - Straight & correct - 2' deep crate

Serial Number: 9518 - Capacity 2500 - Pump and front trap, - Top Hatch, - Sprung Drawbar, - Rear or Front LH Fill, - Hydraulic Braking, untested - Trailer Lights, - Rear Work Lights, untested - C/w PTO - No vacuum pipe included, although brackets are supplied

C/w PTO - I new saucer this year, 1 new around 2 years ago - Good skirt - Blades need turning - Some surface rust but solid - Manual folding - 7' cut

In good working order

In good working order - Recently done 1200 bales with no faults - C/w bale sledge attachment

Has been stored inside since new - C/w control box - Bale count unknown as only manual rest counter fitted chains and drive system all ok - Last used in 2022

C/w leveling boards - Electric control - Good tidy condition

Reconditioned 3 years ago - Shotblasted - Resprayed - New bearings - New hoses - New belts last season - Good condition

2023 - Single axle - Hydraulic brakes - Rear tool box - Rear lights

New gearbox in the last 6 months - Good working order - C/w Hydraulic road wheels (some rust on rams) - Work wheels have good tread - Good working order - 3 point linkage mounted - Blades have good metal left - Hydraulic locking when in work mode

Hydraulic folding - New gearbox 2 weeks ago - C/w PTO - Blade in good condition - C/w stand

C/w PTO - Very little use - Blades showing little wear - C/w stand

1.5m working width - 2.6m maximum reach - No PTO shaft - 3 point linkage - Hydraulic levers - Finger bar cutter - Serial number: 34591 - One owner - Regularly serviced - Help with loading available - Good condition - Little use

Manual bale tension - Used last season

No8 bodies - Rear disc - Good metal all round

3 point linkage - Motion controls - Power slew - 1.2m head - F10 T Flails

Had little use - Working order - C/w PTO shaft - Purchased in early 2023 but only used a handful of times since and there for cannot be justified

C/w markers - Lights to rear & hazard plates - Dry stored between use - 547 Hectares only since new - Leading tines with tungsten edge - Following harrows - Reasonable wearing metal - Hydraulic tines kickback (added) - Additional set of tyres added for better depth management - 7'' head share (can be changed) - C/w bean kit - Bout markers - C/w control box, manuals - Pro series 800i Artemis variable rate

C/w PTO shaft - Suc, 1000 TR - All new belts fitted last season - Year unknown - Dry stored - Sucks & dispenses - Tidy paint & metal work - C/w Large pipe & intake spout - C/w Prop stand - Trailed machine

C/w packomatt - All hydraulically adjustable vary width - Road wheel - Good metal all round covered approx 400 acres over 2 years

Ready to work

Fitted with dura faced feet and stocks air seeder - Hydraulic depth

2500HA - Artemis control box - Good metal hydraulic auto reset legs - Owned from new - Barn stored - C/w stock slug pelleter

All in working order

Rear discs - Depth wheel - Hydraulic - Auto re-set

C/w N2000 Hopper extension - C/w PTO - Hydraulic shut off - Independent variable rate - Twin disk - C/w Cover - C/w Adjustors

Serial number: 45SB400DRHT - Vendor is happy to attach on tractor and lift onto a low loader lorry - Working condition - 3PNT linkage - Stands when not in use

Conventional square baler - c/w PTO shaft - Bale count not in working order - One tyre needs replacing - In working condition - Mechanically sound - Jack available but not attached

Good solid spreader - Works as it should - Good rotor - Recent front and rear bearings - Good tyres - Ready for work

Been parked in the dry for a number of years - Ran through a few bales and it ran fine - Tyres show signs of age but holding air - Loading not a problem

C/w PTO shaft - Loading available

C/w PTO - Working order - Tidy - Used last year - Baled 6000, no issues

Cutting Width - 2.42m - Swath Width - 2.2m - Transport width - 1.9m - Weight - 1015kg - Discs - 6 - Knives - 18 - 900/600 with Nylon tines - PTO 540/1000 - Min Hp - 65/90 - CAT2 linkage - Serial Number: KT448100 - C/w PTO but cover needs replacing - Loading available - Upper panel bent out of true - Run up ok but untested under load

C/w PTO - Loading available - In working order - Used to top 5 acres last week - Good solid bed - Ready to go to work

Not used recently but was working when last operated - C/w cover - Dry stored - Lights present and untested - Only minor surface rust visible - Hydraulic shut off - Headland adjustment

C/w PTO - C/w packer roller - Tines well worn (missing 2 tines) - C/w central leveller bar - C/w rear 3 point linkage & PTO to mount drill

C/w PTO - 1 owner from new - Odd tine bent - Tyres holding air - Skirt in good condition - Spring on skirt needs attention

Mounted on trailer - Driven by a 3 cylinder air cooled diesel engine so can be used stand alone - Machine is old but still does the job - Recently wrapped 50 bales this season - Remote control currently doesnt work but can be used on the control box - Engine leaks oil & can need some encouragement to start when left for sometime but runs fine - Can be seen working - Been on farm since nearly new - Only selling due to farm being sold

1 owner from new - C/w PTO shaft - Hydraulic folding - Hi crop flow - Relatively tidy skirt and paint - Adjustable swath board - Nylon conditioning tines - Inspection/viewing welcome

15m working width - C/w control box - No current certificate - Inspection welcome

11 legs - Solid metal - Approx 3m working width

C/w PTO - Bed appears solid - Adjustable skid height - blades worn

Only been used once - In good working order

C/w PTO & brand new guard - All tyres holding air - 13 arms - All present - Tines worn but useable - Skirt in good condition

C/w PTO - Hydraulic folding - Tyres holding air - Odd tine broken - C/w Stands

6F - Transport wheel & tyre - Two disc coulters - C/w twin leg stand - Some new hydraulic pipes renewed recently

In working order

2004 MASCHIO RECO ALIANTE 300 PIGGY BACK DRILL - 3m width - 24 row - C/w markers - Most tines present - C/w control box - Lights need attention

Hydraulic Shut off - Wagtail - Stored undercover - 750 litre capacity - Width - 175cm - Weight - 151kg - CAT2 Linkage - Filling height - 96cm - Moulded hoppers - Rotary agitator - Pendulum spreading 6 -14m - Simple calibration and application rate setting

C/w PTO - Both tyres holding air but perished - Barn stored - Good working order - Manual tensioner - Good tines

C/w PTO - Twin Disk - C/w Cover - Hydraulic shut off - C/w Agitators - Lights present but untested

1.2M head working width - 4.9M max reach - Lights not working - Electric lollipop switches - F10 T flails - Serial Number: 04PA35 - Vendor has owned for 2 years, used as a backup machine - Not used since January 2023 - Loading available - Slight gearbox leak, head tilt ram seal needs replacing, rolle bearings gone, piggy back pump for arm controls not working - Bought as a backup machine, has done no more than 50 hours work since the vendor has had it - Does a great job, runs smoothly although the ground roller vibrates as the bearing are gone - Piggy back pump not working when I bought it so has been piped so that the rams are powered on a flow and return spool - Flails still have life in them. Original head with 2 way cutting. - Arm straight with no welding

VICON VARISPREADER FERTILISER SPINNER - Good condition - Barn stored - Used this year - Serial Number: 76115-07-19265

Model: 28-RBH220 - Mainly stored in warehouse - It has light surface corrosion only - Robust, sturdy, and flexible riding arena harrow suitable for most surfaces - 20 spring tines - 36 height-adjustable rake tines - Side scraper for collecting material pushed out from the track - The adjustable rake tines can be set to go deep, catching any unseen objects in corners and along the edges with the adjustable side scraper. - The harrow is equipped with one row of spring tines making it flexible, one row of rake tines, a mesh roller with spiral making it fully flexible, and a side scraper to pull in material pushed out of the groove. - Using a tool, you can easily adjust the height of the rake tines in the back, the mesh roller, and the side scraper. The mesh roller can be removed with the help of a tool. The flexible construction of the three-point linkage ensures better and more consistent results.

Mostly good wearing metal left - NO cracks, bends or welds on the beam - Hydraulic pipes slightly perished - Manual front furrow adjustable - Land wheel holding air but perished - 4 + 1

3 point linkage mounted - All tines present, straight & strong - 1 hydraulic pipe missing, but will be put back - Twin rams have good seals but small amount of rust

C/w PTO - C/w G new rolls + 4 part rolls of tama twine - Manual tensioner winders not seized - Tyres have good tread holding air but perished - Most pick up tines straight - Manual fold out

2003 build - Seed Spider NZ Ltd - Product No 9000 Salads Seed Drill - Sn: 3029 - 1 Owner from new - Unused for a few years but kept under cover - Loading available - 3PNT mounted - 4 applicator towers - Stainless rollers front and rear - CAT 1/2 linkage - C/w transport/ storage chassis

Manual folding - No weights - Tines have little wear - C/w folding leg stands - Never used

Single axle - conveyor works but needs new belt - C/w weigh screen (untested) - C/w PTO - Hydraulic front door - Tyres have good tread, holding air but perished - C/w rear ladder - Brakes & lights present but untested - Some small rust holes inside

2014 KRONE BIG PACK 1270 LARGE SQUARE BALER - Single axle - Approx 33,000 bales - Bought new from compass tractor and annually maintained by Compass - high speed pick up - Good tread on flotation tyres (new in 2022) - First used in 2015 - Used for hay,silage and straw - Wide pick up (2.3M) - This lot is being sold due to ceasing arable production on the farm.

Heavy duty - No cracks or welds on arms - 2 disks damaged on press

Good working order - New tyres on ready to go

2018 SHELBOURNE REYNOLDS POWERMIX PRO EXPRESS 25M3 FEEDER WAGON - Front Elevator / Conveyor - DG600 Weigher - 2sp gearbox - In cab elec controller - The 25m³ Powermix is a compact twin auger diet feeder in a sprung tandem axle configuration, it has a large capacity depending upon the dry matter of the feed. It is a short coupled machine able to navigate around tight buildings and requires a 125HP tractor. - The front mounted express conveyor is standard which allows feed to be elevated to either side of the machine to a height of 1.5m. - Smooth scrolled auger flighting for greater wear resistance and lower power requirement - 12.5mm thick S500 lower tub wall - 15mm thick S500 auger- - Removable auger wear plates - Rear mounted ladder - Rear road lights - Front mounted scale can be viewed from both sides - Steel straw ring - Smooth tub shape for faster bale processing and mixing - 4 x 90mm load cells - Hydraulic brakes - Direct Coupled hydraulics - 2 speed gearbox with manual control - Lights working - C/w PTO - Serial Number: PME16180641 - Blade condition is fair - Tyre condition fair - Its not as clean as the photos show as has been out on the farm - Blades and knives will need replacing soon - In working order

No cracks, welds or bends in beam - C/w hand wheel -- Some wearing metal left (odd bit needs replacing) - Manual front furrow adjust - Small leak in valve - No discs

C/w Nizoa Hopper extension - Twin disc - Variable rate - C/w PTO - Hydraulic shut off - Hopper solid

C/w unload auger - C/w loading auger - New drive belt in 2023 - Worked last year but heater not working - Cold air can be blown throughout - Both tyres soft - C/w PTO

C/w PTO - Working order

5' pick up - Small bales - C/w PTO shaft - Dry stored - Good working order - Last used 2021 - Operators manual and parts catalogue

Spares or repairs - Cereal seed drill - Unknown year - Serial number: 5771 - C/w PTO - Lights untested - Control box - Look complete, but unused for some years so will need parts and time to bring back working condition or use a donor for another MF150 drill - Vendor is happy to attach on tractor and lift onto a low loader lorry - 3PNT mounted - Hydraulic side folding - 540 PTO driven air drill - Tine coulters - Wheel eradicators - Weight 1224KG - C/w control box and ops manual

For single beds - SN: 852261 - Unused for a few years but was in useable condition when last used - Front mounted - 12V pump supply required (currently wired for 7 pin front light circuit)

C/w control box - C/w PTO shaft - Pick up width 1.5m - Buyer will need to replace PTO guards - Spout tilt ram has been removed as not working but will be included in the sale - Jockey tyre holding air but perished - JF FC800 (side mounted) with extended shute - C/w operators manual and control box - Owned from new, regularly serviced & stored in the dry - Not been used for several years due to using contractors - Viewing welcome & can assist with loading

Pump working - C/w PTO shaft - Change-over valve is seized and will need attention - Tyres holding air - Rear splash plate - Solid chassis

5 cube spreader - Recent new lid fabricated - Hydraulic brakes but untested - Light untested - No rust in the barrel - Have PTO shaft but needs a guard - No control box

Fully offset - Previously repaired as pictured but now very strong - C/w PTO shaft - 1 owner from new - All blades present - All skids & metalwork solid - Full working order

C/w PTO - C/w Control box - Section control - C/w spray tanks - Hydraulic boom height - No test certificate - Used very recently

C/w PTO - Metal work solid - Tyres holding air - C/w leg - Working order - Used last winter

Working width 6' - PTO working - Loading can be arranged - Only had little use - The blades & skids are in good condition with very little ware - Top centre section has been repainted due to it being flakey - Picture shows metal condition before paint and after cleaning with wire brush

PTO shaft - Old and a bit rusty - Makes nice bales - 2 nearly new tyres - Relatively new needle - Serviced last summer before it went in the shed and not used since

Good web - Solid frame work - 4.5m working width approx - This lot is part of a genuine unreserved dispersal taking place in stages with the larger equipment and tractors being consigned into our September sale. A viewing day where bidders can view lots listed in this consignment on Friday 2nd August between 10am-2pm

No visible welds - C/w 4 disc coulters - Wearing metal - Good hydraulic pipes - This lot is part of a genuine unreserved dispersal taking place in stages with the larger equipment and tractors being consigned into our September sale. A viewing day where bidders can view lots listed in this consignment on Friday 2nd August between 10am-2pm

2011 Teagle Centerliner Fertiliser spinner (S/R) - C/w PTO shaft - Spares or repairs - C/w Headland tilt - C/w cover - Corrosion inside, still spins and functions but due to balls at base of hopper being sold as spares or repair - C/w 3 hopper extensions - This lot is part of a genuine unreserved dispersal taking place in stages with the larger equipment and tractors being consigned into our September sale. A viewing day where bidders can view lots listed in this consignment on Friday 2nd August between 10am-2pm

PTO driven - C/w PTO shaft (needs new guard before use) - 3 pt linkage - This lot is part of a genuine unreserved dispersal taking place in stages with the larger equipment and tractors being consigned into our September sale. A viewing day where bidders can view lots listed in this consignment on Friday 2nd August between 10am-2pm

Thought to be granite - 1.65m long x 35cm diameter - This lot is part of a genuine unreserved dispersal taking place in stages with the larger equipment and tractors being consigned into our September sale. A viewing day where bidders can view lots listed in this consignment on Friday 2nd August between 10am-2pm