Tyres holding air - C/w PTO shaft - All arms present - C/w skirt in good order - Owned for 7-8 years - Sale due to upgrade

C/w PTO shaft - Headland management - Will hold 4 bags when full to maximum - Surface rust only - C/w 5 hopper extension - C/w rollover cover - No lights - Can be loaded

C/w 6 subsoiler legs, 2 rows of discs, rear packer roller - Hydraulic packer roller depth adjust - Very good wearing metal left - Adjustable depth subsoiler legs - Frame solid

2018 BRYCE SUMA POSTBANGER WITH QUICKFENCER STANDARD 80 NETTER - Size of weight 400kg - Rock spike included - 3 Point linkage - Hydraulic side shift, back shift, top link & leg - Telescopic mast - Little use in the last 18 months - Single strand barbed wire unroller & tensioner attached - C/w spare rope for weight - Will carry 2 x 500m rolls of net & 3 x 100m rolls - Heavy duty rock spike - Please note that the description and photos were taken back in March 2024

2M wide - Appears to have had little or no use - Dry stored - 3pnt linkage mounted - C/w stand - Land driven/chain drive - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

Metal detector model - C/w PTO shaft - Dry stored - Tyres holding air with tread - No lights - Swivel shute - C/w PU220 pick up (2.2M) - Year unknown - No control box - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

Good tines/spikes throughout - Manual folding - 3PNT linkage mounted - Extra ballast crates - Adjustable stands - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

C/w PTO shaft - Swivel shute with tilt adjustment - C/w Farmiforest 3000 trailed input elevator (hydraulic driven) - Dry stored - Very heavy duty chipper - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

C/w PTO - Dry stored - Hydraulic driven - Manual swivel shute with flap adjustment - Heavy duty chipper - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

C/w PTO - FC283 lift control - Dry stored - Nylon conditioning tines - Solid metal - Presented in its working clothes and would clean up very well - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

Dry stored - C/w 2 PTO shafts - Tyres holding air - Last used 2 years ago -This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

2005 SHELBOURNE REYNOLDS 18' STRIPPER HEADER - C/w transport trailer - Approx 18' working width - Machine no: 196515 - Presented in its working clothes - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

Legs cut off to adapt for use on digger - 40MM pins but unusre and what digger it was designed for - C/w removed legs and 3PNT linkage mounting (pictured ) - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

Can be used for wood, grass or other feedstuffs - Only used 10-12 times from new as wasnt suitable for intended use - Various Dies - C/w Vibrating Sand Screen with screw feeder - C/w Vibrating Table - In feed hopper & Control Cabinet - Dry stored - C/w 1 x feed in hopper and auger - 3 phase electrics - Motor driven - This lot is part of a genuine reduction sale due to a family bereavement. Consequently limited information and knowledge of the machinery is available however the family will assist where they can. It is recommended that high value items are viewed in person where possible. Interested parties consideration and patience would be appreciated when making enquiries.

1996 HYDRO-CHAFER T2500 TRAILED CROP SPRAYER - Lights to rear (one lense damaged and untested) - Tyres holding air - Stainless steel tank - No current NSTS certificate - Approx 24M booms - Adjustable height - 1996 HYDRO-CHAFER T2500 CROP SPRAYER

C/w 6m disc injector - 1200L/min flight pump - Lazy arm - Turbo filler - Lazy arm - Twin VMR pumps - Tyres holding air with good tread (one slightly soft) - Lights present to rear (untested) - C/w toolbox

C/w control box & motor - Stored outside - Inspection welcome

55,000 bale count - 80 x 90 bale size - C/w Control box - C/w PTO shaft - Rear steering axle - Notter blower control box but no loom

Runs up on the tractor fine - Has roller on the rear - Fully guarded PTO

Used last season to do 8 acres - In working order - Reasonable stars - Road lights - Bolder box - Rear steering (auto straight doesn't work) - Left/ Right Levelling - Auto depth - PTO needs new guard - Slight leak on main lift ram - Selling as we have stopped growing potatoes

Built 2020 - Empty - 2 Stoppers - Galvanised frame - Can load

Bought new on farm - Only selling as bought a new twin rota rake - 12' sweep - Last used 2 years ago - Good working order - All tines present - Good tyres - Only done approx 70 acres a year - Believed bought in 2012

High capacity baler, with wide pick up - regularly serviced and greased before use - Baled 4000 bales last year without a problem - Always barn stored - Lights working - Only selling due to an upgrade

2013 KUHN FC283 GII LIFT CONTROL MOWER CONDITIONER - 9' cut - Good working order

10' cut/ 3.2M - Good working order

C/w packer roller - Adjustable depth

Done little work - Water filled

2001 KUHN MULTIMASTER 151 6 FURROW REVERSIBLE PLOUGH - Shear bolt - Manual vari-width - Metal work sound

Single axle with good tyres - Last used 12 months ago - 20 cube feeder

Owned for approx 5 years - Good working order - Last used in 2021, had new blades in 2020

Recent new rips on some tines - Ram weeps some oil - Please note these photos were taken in October 2023

C/w PTO and control box - Owned since new - Working order - Had a new drive chain - Tramlines work

Model year 2013 - 29,300 bale - Bought as ex demonstrator - Serviced every year by Smallridges - Bale size: 80cm x 90cm 4 string - Steering axle - Blowers on the knotters - Isobus ready - Good working order - Only selling as buying a bigger baler - Rear camera - Hydraulic tailboard - Always dry stored - 1 owner from new - Ex demo - Please note these photos were tank in November 2023

3 meter cut - Quick change blades - Steel conditioner tines - 1000RPM PTO - C/w Operators/parts books - Genuine Claas spares including 3 x new skids, blades & packets of bolts - In good working order, used all of 2023 season - Only being sold as upgraded to a newer machine for this upcoming season

8' cutting width - C/w PTO shaft - Loading available - Used last season - Bed oil changed last season - Good working condition

5-1m max working width - Owned from new - Good working order - Recent full set of new tines - Very little work - Barn stored

2.5m Transport width - Slurry is pumped through machine & worked into ground as it spread - Making better use of Nitrogen while aerating ground at the same time - 6m working width - Can be retrofitted to all slurry tankers 2000'G & upwards or can be mounted onto 3 point linkage & used with umbilical system - C/w Rear lights - Reason for sale due to change in machinery policy.

C/w PTO shaft - 8'' Input - Purchased & used for its purpose & now surplus to requirements

In good condition - Was used last year but pick up reel needs attention - Viewing welcome

Serial Number: HR3655 - Cutting width 2m - c/w PTO shaft - Hardly used - Loading available

1.2M Head working width - 4.9M max reach - Lights not working - 3pnt linkage - Electric lollipop switches - Serial number: 19pa2797 - F10 T flails - Vendor has owned for 4 years, he has greased daily, oil and filters changed annually - Loading available - Slight gearbox leak, rear seal needs replacing - Slight bend in arm - New style 1.2M head - Vendor has cut 600+ acres with it each year ive owned it - The arm was bent hen purchased but it does not affect the use - Has recently had rotor drive collar replaced, good flails , head and roller bearings are good, runs smoothly - Both pumps in good order - Gearboxes leaks a little bit - No welding has been done on the arms - Had a new control box 2 seasons agon

Hydraulic shut up - Wagtail - Good clean condition - C/w PTO shaft - In working order - Been stored indoors - Used last season - Part of genuine dispersal sale, selling the farm in the spring/summer

7' 6'' width - Very little use as new

3m working width - Tractor with loader available for loading - Low usage - In good working order

Nearly new tines - In good condition - Hydraulic folding good heavy duty machine

14' Long - Twin axle - Working - Good chains - Solid barrel - C/w PTO shaft - Can be seen working

2008 ACCORD EXACTA CL TWIN DISC FERTILISER SPREADER - Hydraulic shut off - C/w roll-over cover - C/w PTO shaft - C/w twin hopper extensions - 1 owner from new - Exceptionally tidy, washed, oiled and then dry stored - 3 bag capacity

Was used last year - In good condition - Can assist with loading

Wessex MTX120 dung beetle paddock cleaner - 12 Months old - Working order - 196cc Engine - Trailed behind ATV, Truck or Gator - Good machine but no longer required due to sale of horses

1.2M head working width - 4.9M max reach - Lights not working - Electric lollipop switches - F10 T flails - Serial Number: 04PA35 - Vendoe has owned for 2 years, used as a backup machine - Not used since January 2023 - Loading available - Slight gearbox leak, head tilt ram seal needs replacing, rolle bearings gone, piggy back pump for arm controls not working - Bought as a backup machine, has done no more than 50 hours work since the vendor has had it - Does a great job, runs smoothly although the ground roller vibrates as the bearing are gone - Piggy back pump not working when I bought it so has been piped so that the rams are powered on a flow and return spool - Flails still have life in them. Original head with 2 way cutting. - Arm straight with no welding

In as new condition - Complete with new set of blades - PTO - Loading available

C/w PTO Shaft - 2.8m Cut - C/w Stand - Good Skirt - Viewing welcome - Sale due to upgrade

Good solid set ready for work

Hydraulic folding - 14ft wide - Good tines - Unused for a number of years and always lived inside

3 phase - Vendor has never used it so condition unknown - Believed working - Good belts

With controls - Working order - Tyres old air one has good tread, the other tread is low

Cat 2 pine size

As found condition - Not seen working

As found condition - Comes with electric control box - Rear pick up hitch and PTO shaft - Has been unused for the past few years but worked OK previously. 

Good working order

Starts OK - Has been stored for a few years so will need going through before putting it to work

Good frame work - One mat will need replacing - Other 3 are good

As found condition - Has been well used and frame has been welded in multiple places

Hydraulic rise and lower - Good spikes

All complete - Would make an ideal working exhibit - Unusual model with a safety brake away hitch system

As found condition

Good bearings - Empty at the moment for transport

Body needs patching - Rotor needs new paddles welding on - Good auger inside - Comes with PTO shaft

Spears or Repairs - Approx 1.8m cutting width - Loading available - Used for two season, marked as spares and repairs due to not being able to find the PTO shaft

Browns - 1 side twisted - Some rubber left on blade - Will go to work if straightened

Variable width - Disc cutters - Hydraulic vari-width - Had a small amount of use, needs a shine up - Good condition and ready to be used

1.8M working width - Had a small amount of use - Good condition and in order to go to work - Very old feet with limited wear, runs sweet.

3 Point Linkage - Some rust damage - 3 Rotor belt drive - Not used for some time - No known faults

1650 Capacity - Wagtail - Good working order - Used this year - Selling due to vendor upgrading

Hydraulic drive - Electric controls - C/w control box - No stand - 1.2m head in good condition - had little use since new - Tractor not included but can be found at lot 7 - This lot is part of a unreserved dispersal on behalf of Mr V Sawdye due to emigration. A viewing day will be held on Friday 3rd May between 10am-2pm and a collection day will be held on Friday 10th May between 9am-5pm with staff on-site to assist. All lots must be cleared from the property by 5pm on Friday 10th May else lots may be forfeited.

Pump needs attaching - C/w pipe & lance - This lot is part of a unreserved dispersal on behalf of Mr V Sawdye due to emigration. A viewing day will be held on Friday 3rd May between 10am-2pm and a collection day will be held on Friday 10th May between 9am-5pm with staff on-site to assist. All lots must be cleared from the property by 5pm on Friday 10th May else lots may be forfeited.

C/w lance and hose - This lot is part of a unreserved dispersal on behalf of Mr V Sawdye due to emigration. A viewing day will be held on Friday 3rd May between 10am-2pm and a collection day will be held on Friday 10th May between 9am-5pm with staff on-site to assist. All lots must be cleared from the property by 5pm on Friday 10th May else lots may be forfeited.

C/w Suffolk coulters - Used last autumn

5'6 cut - Used last year - Everything works as it should - PTO shaft - New belts fitted last year - Help with loading available

Spares or repairs - Hydraulic shut off - Wagtail - Regulator bar is too long

Last used 2012 - Barn stored - Put away in working order - 40mm webb

In good condition - In working order

Good machine ready to work this season - Good gates on rear - Fully guarded PTO shaft - Never been welded - Stand has broken of but does not affect use - All tines present but a couple bent vbut will come with 8 spare new ones

Good working order - No rust holes - Fullt guarded PTO shaft - Good places - Solid linkage frame and chains - Adjustable skid - One skid as some damage but doesnt affect use

Good solid set - No rust in frame - All soling ready to work

Spares or repairs

1 tine missing - 2'6'' x 4'11''

New bearing on one rota recently - Last used 3 years ago - Working order - Belt driven

Good working order - Good solid metal work - Full guarded PTO shaft

6m - C/w control box - Owned since new - Not used for 6 years - Working when last used

Working order - C/w spare new roll of wrap

Used last year - C/w PTO shaft - Help with loading onto trailer

Only done 30 acres per year - 8' cutting width - PTO shaft - Help with loading

Light use, 20 Acres per year - Stored under cover last 13 years - Four new belts fitted about 5 years ago (for peace of mind) - Have only done about 100 acres since

Spares or repairs - Vintage Dening of Chard horse drawn roller - Frame rusted but the rolls and cast ends are in good condition

Hydraulic feed roller - Was working when last used couple of years ago - Input bearing rusted up

C/w Filling Bungs - Rollers are full - Assistance with loading available

Spares or Repairs - 5' Cut - Double chop - C/w PTO - C/w Control box - 3 blades missing on flywheel at bottom of shute - Forager all working - Has working electric controls for shute

Used approx 30 years ago - Has been stored undercover - Can be loaded using a telehandler