K TWO 1000 DUO REAR DISCHARGE DUNG SPREADER - 10 Ton

Bomford 91 offset flail topper in perfect working order - Ready to use, runs smooth - No unwanted noise or vibrations

Hi-power - 54HP pump - F10T flails - 1.2M head - Cable controls - C/w stabiliser bracket and top link - One owner from new - Head a little noisy when out work but used this season without and problems and everything is working as should

27-22-2020 manufacture date - 1M Cutting head - Cable control - Right hand cut - Only used once, Since it was brought new - Suits a smaller tractor

2007 LUCAS CASTOR 30R SILAGE/STRAW CHOPPER - Very good condition

Part of reduction sale - Good working order

Grimme all rounder 90 potato harvester - Last used October 2022 - C/w Hydraulic steering - All complete - Including: new belt for waste - Has been serviced each year - Bought from Lincolnshire in 1998 has done approx 30 acres each year since - Only been sold as giving up potatoes - Always dry stored - Approx 35mm webbing

Single Phase - c/w Manual Swivel head - Used last year - Working order, can be seen working - Always dry stored

Variable speed (slow mowing) - Single phase - Pallet fork attachment - Used in April 2023 - 7' wide - Always used for potatoes - Can be seen working - Vendor will load

Number of different grading chains from 1'' to 2 1/2'' - Sizing belt working - Trash bed needs attention - 3' conveyor - C/w lift conveyor - C/w 3' x 6' picking belt table, not used for 20 years - Lot 306 was fitted onto it before the washer was added. - Always used for potatoes - Always kept inside - Single phase - Used in April 2023 - Can be seen working - Vendor will load

10 ton per hour capacity - C/w lift elevator with sprinkler washer - 3 phase - Can be seen working - Electric door (adjust potato rate) - Always used for potatoes - Always kept inside - Vendor will load - Used in April 2023

Always used for potatoes (other root vegetables can be used) - 3 phase - Used in April 2023 - Always kept inside - 4' wide - Can be seen working - Vendor will load

Single phase - C/w Tong 4 way bagging unit - 3' wide - Used in April 2023 - Always kept inside - Can be seen working - Vendor will load

Can be used for 25KG or 7 1/2KG Bags - Has been adapted to 7 1/2KG bags - Single phase - Used in April 2023 - Always kept inside - Can be seen working - Vendor will load

3 phase - Medway model 150 Stitcher - Conveyor is 7'6'' long - Used in April 2023 - Always kept inside - Can be seen working - Vendor will load

Netwrap or string tie - Hydraulic or manual lift pick up - Brand new belts in 2022 - 41,991 bales on computer - PTO Guard needs some TLC

Hammer flails - 1.6m cutting width - C/w rear roller - Hydraulic folding - C/w PTO (no guard) - Some front guards bent/missing - C/w manual

New bearings

Trailed straw chopper - C/w electrical controls - Drawbar hitch - Used mainly for straw - Swivel shute - Recently refurbished - Good tyres (one nearly new)

Last used last year - All flails present - New PTO recently - Good tyres - Working order

Good working order - New knives last year - Clutch plates replaced

Pin + cone brackets - Tines straight - No leaks on rams - Had little use - Good working order

Exacta Geo Spread Centreflow - Current NSTS Certificate 22.03.23 - C/w Greedy boards - C/w PTO - C/w Cover - Manual - Isobus - Selection control

C/w rock spike - C/w counter balance weight - Telescopic

Twin auger works - Some metal at the bottom getting thin

C/w control box - Working order (one wire frayed will need attention shown in picture) - 8 Pipes (8 row)

Not used for 20 years when it was taken off a Marshall threshing machine - 3 drums (all turn) - Always barn stored - Believed in working order - Will need some TLC - Please note does not include the trailer it is sat on

Work when last used - Good condition

9ft - Very little use - Good working order

Knives need attention - C/w control box - C/w PTO - Hydraulic adjustable shute - No holes in metal work - For sale due to upgrade

Metal conditioning tines - Working as it should - Last used 6 weeks ago - New power ram at start of season - C/w PTO cover - Tidy covers - C/w toolbox and new set of quick change blades - Sale due to upgrade

C/w Quantro control box - c/w manuals

Cable controls - Oils + filters changed last year - Full set competition flails + same spares - 1.2m head - Clean rams - 6-6.5m reach approx - Lights work - c/w PTO shaft - 3 point linkage

2.4M width - GWO - Slight bend on ram but does not affect operation

1999 Grimme DL1700 harvester - Picking off table, hydraulic wheel drive - 5 rows star cleaners, haulm rollers - 50mm main web, 45mm secondary web - Machine all sound, straight and ready for work - Done less than 20 acres in last few seasons - Operators manual

C/w Packer roller - Odd tine missing - Machine No: 33839 - Solid frame/ metalwork - Depth adjustment (manual) - Front levelling bar - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

Machine No: 352478 - Metal conditioning tines - Trailed machine - Tyres holding air (some perishing) - Lights need attention - c/w PTO shaft (requires new guard before use) - Used this season and purchased new on farm - c/w Spare new blades - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

Believed Watson - 11' frame, 10' roller - Solid frame - Additional Ballast tray needs attention - Makeshift bungs - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

New Holland 648 crop cutter - C/w PTO Shaft - Tyres holding air - Lights present (untested) - Net wrap - C/w Control box + wiring loom - Owned from 2004 - Used this season - Approx 35-36,000 bales on control box - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

Mounted Twin Rotor Rake - Used this season - 1 tine needs replacing, missing 1 arm - 3 tyres appear to be reasonably new - 1 tyre soft - c/w safety bars, not fitted and some bends - c/w PTO shaft (may need new PTO guard before use) - Presented in its working clothes - Owned since 2004 - c/w Replacement new arm + some spare tines - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

All tines present - 1 owner from new - GF 5001 MH Digidrive - Tyres holding air - Presented in its working clothes - Tidy paint for age - Used this year - c/w PTO shaft - 1 arm missing but believed to be on the farm with the vendor hoping to locate - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

Used this year - c/w Control box + remote control - Reasonable belts - Beacon light damaged - Present in its working clothes - Remote control not used in recent years - 1 owner since new - This lot is part of a dispersal sale whereby the farm has been sold. Inspection of lots is welcomed by appointment only with the vendor and all buyers should collect items from this Vendor during the week following the sale by appointment. Limited loading assistance can be provided in the form of a loader tractor.

Working order - C/w Some spares - Rear rolled is a caged roller and the front roller is flexi coil

PA5755 - Motion controls - Upgrading to longer reach - Brake panel slightly bent - T hails - GWO

Bale count unknown - 1 Tyre has a slow puncture - C/w Controls

2008 LUCAS CASTOR 60R TRAILED STRAW CHOPPER AND SILAGE BEDDER - New bed chains and hydraulic pump 2 years ago (has done little work since) - Swivel suite - Working order ( used recently ) - C/w control bored - One tyre low pressure

3 meter stubble cultivator - Good metalwork

Recent new rips on some tines - Ram seeps ok

No weights

Good working order - Age unknown - New power harrow tynes 20 acres ago - Suffolk coilters - Boult markers all word with tram lining kit 3M working width

Bracket machine (brackets being kept) - McConnel 1.2 head - Forward arm (works beside cab) - Done a lot of work but always been maintained - C/w Control box - C/w PTO shaft - C/w Stand - Dry stand - Last used 3-4 years ago but should go straight to work

One owner from new - Dry stored - C/w PTO shaft - Reasonably tidy Paint - Good tines which have done at the very most 100 acres - Model: NG-H 101 - Very tidy second hand machine

C/w Trailer both wheels need attention - Believed water tight - Engine turn over & prop spins - No brackets or lights on trailer - Loading available

Solid machine - Hydraulic brakes and lid - Not been used for 10 years - Tyres holding air - C/w PTO but guard needs attention before use

Front mounted - 12'' Intake capacity - Not had a huge amount of use - Tidy machine

Bought new this year and done little work - Pin and cone brackets - 2M wide - Please note this lot is part of a genuine dispersal (the farm currently being available to let). Please note this lot is part of a genuine dispersal (the farm currently being available to let). Please note there is no viewing day but if you would like to view any items please contact the office.

Light use - Has had some modification to stengthen it up - All in good working order -

Round baler - Used this season - Works well - Has had new chain & belt this season - Good strong baler with variable chamber to allow it to produce different size bales

2020 KRONE EASYCUT 320CV MOWER CONDITIONER - Done less than 300 acres - C/w PTO - C/w Spare blades - Quick release blades - Metal conditioner times - Adjustable swatch boards

C/w 7.2m bomech trailing shoe - C/w Jurop PN 106 pump - C/w PTO shaft - 1 Tyre holding air but perished - 1 Tyre flat & perished (slow puncher) - No rust - Sprung drawbar - Switch hitch

C/w Splash plate - C/w 2010 Jurop PN106N Vacuum pump  - C/w PTO - No pipes included - Tyres have 80% tread & not perished - Brakes & lights present but not tested - some surface rust

C/w crumbler roller - No visible welds - Reasonable metal.

No obvious welds - Not done a huge amount of work - Grease on rams. 

Done little work - Swivel stands - C/w discs & crumbler roller.

50'' wide - Good blades - Working.

C/w rear discs - C/w rear roller - Solid frame & metal.

Working - C/w control box.

Cable controls - Only done a handful of bales from new (50) - With digital counter.

Hydraulic folding - 2 rear hazard boards not pictured - Very tidy machine which has only done 200 acres since new - Good metal & paint - Extra ballast applied

Spares or repairs - C/w Tramline kit - C/w manuals

6' 3'' wide (7' 1'' wide including frame) - 3 PNT linkage - 20'' ring diameter

Manual opening - C/w PTO (no guard) - Hopper solid with no holes

C/w pto - 3pnt linkage mounted - Metal very solid - Good working order

Good condition - Stored inside - Front or back hydraulics - Swing to left or right of tractor - Adjustable legs

Used last year

Twin disc

Used recently - KM 22 model

Not used recently

Please note no PTO

Last used last winter - New flails recently - Good tyres - Brakes and lights work - Only being sold as relinquishing the tenancy

Only being sold as relinquishing the tenancy

Last used 2 years ago - One tyre missing - Needs attention

Not used for at least 20 years - Barn stored - 2 wheels need replacing

3 point linkage - Last used 10-12 years ago

Spares or repairs - Not used for many years - Needs attention

Spares or repairs - Not used for approx 10 years

Working when last used 20 years ago - Believed working

Approx working width 5' - Last used approx 10 years ago - Belt driven

Last used 2 years ago - c/w fertiliser applications (well rusted) - Needs attention (chain missing)

Silage/straw round bale shredder - Good working order - Will also chop fodderbeet/roots - Giraffe shute with hydraulic cap recently fitted - New clutch plates - New belts

Last used 2012 - Barn stored - Put away in working order - 40mm webb

C/w continental webb - C/w Granule applicator - Last used 5 years ago - Barn stored - Needs new tyre - Self moving - Working order - Single phase

Lead roller is 7' wide other two are 4' wide - Rings are approx 20'' diameter

Good wearing rubber left - Rubber slightly damaged - Metal Slightly bent - 3 Point linkage or A frame mounted

3 point linkage - Hydraulic speed - PTO driven - Manual spout adjust - Reverse feed - C/w PTO

Electric start stop - Manual section controls - MOT until 11/4/24 - Induction hopper - C/w PTO - Trolley not included

C/w control box - C/w seed pipes - C/w manual - C/w seed bar - C/w cover

Full working order - Used this season - Spare blades - Tools - Handbook

Mechanics seized - Good wearing metal left - Loading available

c/w Half the PTO - Working when disassembled - No Guard